[Bug 93] test 4GB microSD card compatibility

bugzilla-daemon at bugzilla.openmoko.org bugzilla-daemon at bugzilla.openmoko.org
Tue May 22 11:26:55 CEST 2007


http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=93





------- Additional Comments From pavel at ucw.cz  2007-05-22 11:26 -------
> Do you have a dmesg so we can see what the error is?

Hmm, it now says:

<4>adc_read: entering (pcf=c07dac00, channel=0, data2=00000000)
<4>pcf50606_irq: entering(irq=60, pcf=c07dac00): scheduling work
<4>pcf50606_work: INT1=0x40 INT2=0x00 INT3=0x01:SECOND ADCRDY
<4>adc_read: returning 647 0
<4>mapped channel 0 to 0
<7>mmc_set_power(power_mode=0, vdd=0
<6>s3c2410-sdi s3c2410-sdi: powered down.
<7>mmc_set_power(power_mode=1, vdd=20
<6>s3c2410-sdi s3c2410-sdi: running at 0kHz (requested: 0kHz).
<7>mmc_set_power(power_mode=2, vdd=20
<6>s3c2410-sdi s3c2410-sdi: running at 99kHz (requested: 98kHz).
<7>mmc_set_power(power_mode=2, vdd=20
<6>s3c2410-sdi s3c2410-sdi: running at 99kHz (requested: 98kHz).
<6>s3c2410-sdi s3c2410-sdi: initialisation done.
<7>mmc_set_power(power_mode=2, vdd=20
<6>s3c2410-sdi s3c2410-sdi: running at 99kHz (requested: 98kHz).
<7>mmc_set_power(power_mode=2, vdd=20
<6>s3c2410-sdi s3c2410-sdi: running at 99kHz (requested: 98kHz).
<7>mmc_set_power(power_mode=2, vdd=20
<6>s3c2410-sdi s3c2410-sdi: running at 99kHz (requested: 98kHz).
<7>mmc_set_power(power_mode=2, vdd=20
<6>s3c2410-sdi s3c2410-sdi: running at 99kHz (requested: 98kHz).
<7>mmc_set_power(power_mode=2, vdd=20
<6>s3c2410-sdi s3c2410-sdi: running at 99kHz (requested: 98kHz).
<7>mmc_set_power(power_mode=0, vdd=0
<6>s3c2410-sdi s3c2410-sdi: powered down.

<4>adc_read: entering (pcf=c07dac00, channel=0, data2=00000000)
<4>pcf50606_irq: entering(irq=60, pcf=c07dac00): scheduling work
<4>pcf50606_work: INT1=0x40 INT2=0x00 INT3=0x01:SECOND ADCRDY
<4>adc_read: returning 647 0
root at fic-gta01:/lib/modules/2.6.21.1-moko10/kernel$

...but I'm pretty sure I seen scarier messages before...? Kernel is
may-19 one from .../tmp/deploy, this is generated while modprobing the
hci module.




------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.




More information about the buglog mailing list