[Bug 806] New: Standby voltage set to 2.1V, not 1.8V as datasheet says.

bugzilla-daemon at bugzilla.openmoko.org bugzilla-daemon at bugzilla.openmoko.org
Sun Sep 9 01:05:42 CEST 2007


http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=806

           Summary: Standby voltage set to 2.1V, not 1.8V as datasheet says.
           Product: Neo1973 Hardware
           Version: GTA01v4
          Platform: Neo1973
        OS/Version: Linux
            Status: NEW
          Severity: normal
          Priority: P2
         Component: PMU (Power Management Unit)
        AssignedTo: sean_chiang at fic.com.tw
        ReportedBy: speedevil at mauve.plus.com
                CC: buglog at lists.openmoko.org


The set voltage on d3reg is 2.1V.
The SoC datasheet seems to indicate 1.8V is correct.



------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.




More information about the buglog mailing list