Openmoko Bug #1712: Phone will not boot if battery is fully discharged, even if it is plugged in
Openmoko Public Trac
bugs at docs.openmoko.org
Fri Aug 1 06:59:45 CEST 2008
#1712: Phone will not boot if battery is fully discharged, even if it is plugged
in
------------------------+---------------------------------------------------
Reporter: kenrestivo | Owner: tick
Type: defect | Status: new
Priority: normal | Milestone:
Component: Assassin | Version: GTA02v5
Severity: normal | Keywords:
Blocking: | Blockedby:
------------------------+---------------------------------------------------
The phone fails to boot-- or even to recharge-- when plugged in to the
wall power supply, if the battery is fully discharged. It is unacceptable
to have to remove the battery and place it into a separate phone from
another manufacturer, or into a separate battery recharger (not supplied),
in order to bring the phone back to an operational state.
The phone should have a power cube that delivers sufficient current to
operate the phone even if the battery is fully discharged.
Likewise, the power connector to the phone should be capable of delivering
that full load. If USB can't do that, then a separate power connector that
is not limited by USB current limitations should be provided and it should
mate with the power cube.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1712>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
More information about the buglog
mailing list