Openmoko Bug #1595: GTA02 - uboot 1.3.2rc2 terminal s3ser0 doesn't work apparently

Openmoko Public Trac bugs at docs.openmoko.org
Mon Oct 6 17:30:00 CEST 2008


#1595: GTA02 - uboot 1.3.2rc2 terminal s3ser0 doesn't work apparently
---------------------------------+------------------------------------------
    Reporter:  frances.albanese  |        Owner:  laforge 
        Type:  defect            |       Status:  assigned
    Priority:  normal            |    Milestone:          
   Component:  System Software   |      Version:  GTA02v6 
    Severity:  normal            |   Resolution:          
    Keywords:                    |    Blockedby:          
Reproducible:                    |     Blocking:          
---------------------------------+------------------------------------------
Changes (by laforge):

  * owner:  openmoko-kernel => laforge
  * status:  new => assigned


Comment:

 the problem consists of two parts

 1) the hardware flow control is not handled in software since neither
 CONFIG_HWFLOW are set,
    nor is the autobaud-enable-check for a GTA02 board working (explicitly
 checking for GTA02v1 and
    GTA02v2, but not any later versions

 2) the serial init function is not called, since it is only called for the
 console device.
    the serial_reinit_all() call in common/cmd_terminal.c was commented out

 I'm working on a solution

-- 
Ticket URL: <https://docs.openmoko.org/trac/ticket/1595#comment:2>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac


More information about the buglog mailing list