r333 - in trunk/src/target/OM-2007/applications: . openmoko-dialer openmoko-dialer/data openmoko-dialer/src

tony_guan at gta01.hmw-consulting.de tony_guan at gta01.hmw-consulting.de
Thu Dec 7 11:56:43 CET 2006


Author: tony_guan
Date: 2006-12-07 10:55:53 +0000 (Thu, 07 Dec 2006)
New Revision: 333

Added:
   trunk/src/target/OM-2007/applications/openmoko-dialer/
   trunk/src/target/OM-2007/applications/openmoko-dialer/AUTHORS
   trunk/src/target/OM-2007/applications/openmoko-dialer/COPYING
   trunk/src/target/OM-2007/applications/openmoko-dialer/ChangeLog
   trunk/src/target/OM-2007/applications/openmoko-dialer/INSTALL
   trunk/src/target/OM-2007/applications/openmoko-dialer/Makefile.am
   trunk/src/target/OM-2007/applications/openmoko-dialer/Makefile.in
   trunk/src/target/OM-2007/applications/openmoko-dialer/NEWS
   trunk/src/target/OM-2007/applications/openmoko-dialer/README
   trunk/src/target/OM-2007/applications/openmoko-dialer/autogen.sh
   trunk/src/target/OM-2007/applications/openmoko-dialer/configure.ac
   trunk/src/target/OM-2007/applications/openmoko-dialer/data/
   trunk/src/target/OM-2007/applications/openmoko-dialer/data/Makefile.am
   trunk/src/target/OM-2007/applications/openmoko-dialer/openmoko-finger-demo.pro
   trunk/src/target/OM-2007/applications/openmoko-dialer/src/
   trunk/src/target/OM-2007/applications/openmoko-dialer/src/Makefile.am
   trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-dialer-panel.c
   trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-dialer-panel.h
   trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-digit-button.c
   trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-digit-button.h
   trunk/src/target/OM-2007/applications/openmoko-dialer/src/openmoko-dialer-main.c
   trunk/src/target/OM-2007/applications/openmoko-dialer/src/openmoko-dialer-main.h
Log:
this will grow up to a full dialer app. but currently, i only finished 2 widgets which will be used internally first-MokoDialerPanel & MokoDigitButton



Added: trunk/src/target/OM-2007/applications/openmoko-dialer/AUTHORS
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/AUTHORS	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/AUTHORS	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,2 @@
+Michael 'Mickey' Lauer <mlauer at vanille-media.de>
+

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/COPYING
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/COPYING	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/COPYING	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,340 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year  name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Library General
+Public License instead of this License.

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/ChangeLog
===================================================================

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/INSTALL
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/INSTALL	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/INSTALL	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,236 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/Makefile.am
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/Makefile.am	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/Makefile.am	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,2 @@
+SUBDIRS = src data
+

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/Makefile.in
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/Makefile.in	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/Makefile.in	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,615 @@
+# Makefile.in generated by automake 1.9.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+ at SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
+	config.guess config.sub depcomp install-sh ltmain.sh missing \
+	mkinstalldirs
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-exec-recursive install-info-recursive \
+	install-recursive installcheck-recursive installdirs-recursive \
+	pdf-recursive ps-recursive uninstall-info-recursive \
+	uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d $(distdir) \
+    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
+MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+OPENMOKO_CFLAGS = @OPENMOKO_CFLAGS@
+OPENMOKO_LIBS = @OPENMOKO_LIBS@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKG_CONFIG = @PKG_CONFIG@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = src data
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh:
+	@:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
+	cd $(top_srcdir) && $(AUTOHEADER)
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	    $$tags $$unique; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	tags=; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '    { files[$$0] = 1; } \
+	       END { for (i in files) print i; }'`; \
+	test -z "$(CTAGS_ARGS)$$tags$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$tags $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && cd $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	mkdir $(distdir)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(mkdir_p) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+	    (cd $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r $(distdir)
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && cd $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+	@cd $(distuninstallcheck_dir) \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile config.h
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
+	check-am clean clean-generic clean-libtool clean-recursive \
+	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+	dist-shar dist-tarZ dist-zip distcheck distclean \
+	distclean-generic distclean-hdr distclean-libtool \
+	distclean-recursive distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-exec \
+	install-exec-am install-info install-info-am install-man \
+	install-strip installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	maintainer-clean-recursive mostlyclean mostlyclean-generic \
+	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
+	tags tags-recursive uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/NEWS
===================================================================

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/README
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/README	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/README	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,4 @@
+This is a typical example of an OpenMoko Finger Application
+using the OpenMoko Application Framework.
+
+Feel free to use this as a template for your own finger applications.

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/autogen.sh
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/autogen.sh	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/autogen.sh	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,4 @@
+#! /bin/sh
+autoreconf -v --install || exit 1
+glib-gettextize --force --copy || exit 1
+./configure --enable-maintainer-mode "$@"

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/configure.ac
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/configure.ac	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/configure.ac	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,24 @@
+AC_PREREQ(2.53)
+AC_INIT(%(APPNAME), %(APPVERSION), %(APPCONTACT))
+AM_INIT_AUTOMAKE()
+AC_CONFIG_SRCDIR(src/openmoko-dialer-main.c)
+AM_CONFIG_HEADER(config.h)
+AM_MAINTAINER_MODE
+
+AC_ISC_POSIX
+AC_PROG_CC
+AC_STDC_HEADERS
+AC_PROG_LIBTOOL
+
+# base deps
+PKG_CHECK_MODULES(OPENMOKO, openmoko-libs >= 0.0.1,,
+                 AC_MSG_ERROR([*** Required OpenMoko Libraries >= 0.0.1 not installed ***]))
+LIBS="$LIBS $GTK_LIBS"
+CFLAGS="$CFLAGS $OPENMOKO_CFLAGS"
+
+# output stuff
+AC_OUTPUT([
+Makefile
+src/Makefile
+data/Makefile
+])

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/data/Makefile.am
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/data/Makefile.am	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/data/Makefile.am	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,5 @@
+EXTRA_DIST = 
+
+resourcedir = $(pkgdatadir)
+resource_DATA = 
+


Property changes on: trunk/src/target/OM-2007/applications/openmoko-dialer/data/Makefile.am
___________________________________________________________________
Name: svn:executable
   + *

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/openmoko-finger-demo.pro
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/openmoko-finger-demo.pro	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/openmoko-finger-demo.pro	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,6 @@
+MOKOCONFIG = mokoui
+
+HEADERS = src/demo-main.h
+SOURCES = src/demo-main.c
+
+include ( $(OPENMOKODIR)/devel/qmake/openmoko-include.pro )

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/src/Makefile.am
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/src/Makefile.am	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/src/Makefile.am	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,10 @@
+INCLUDES = -DPKGDATADIR=\"$(pkgdatadir)\" @OPENMOKO_CFLAGS@ -Wall -std=c99 -pedantic
+
+bin_PROGRAMS = openmoko-dialer
+
+openmoko_dialer_SOURCES = openmoko-dialer-main.c\
+moko-digit-button.c\
+moko-dialer-panel.c
+
+openmoko_dialer_LDADD = @OPENMOKO_LIBS@
+

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-dialer-panel.c
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-dialer-panel.c	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-dialer-panel.c	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,206 @@
+/*  moko-dialer-pannel.c
+ *
+ *  Authored By Tony Guan<tonyguan at fic-sh.com.cn>
+ *
+ *  Copyright (C) 2006 FIC Shanghai Lab
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Public License as published by
+ *  the Free Software Foundation; version 2.1 of the license.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Public License for more details.
+ *
+ *  Current Version: $Rev$ ($Date) [$Author: Tony Guan $]
+ */
+#include "moko-dialer-panel.h"
+
+G_DEFINE_TYPE (MokoDialerPanel, moko_dialer_panel, GTK_TYPE_VBOX)
+
+enum {
+  CLICKED_SIGNAL,
+  HOLD_SIGNAL,
+  LAST_SIGNAL
+};
+
+//forward definition
+static void  moko_dialer_panel_pressed  (MokoDigitButton * button, GdkEventButton  *event,gpointer data);
+//static void moko_dialer_panel_pressed (MokoDigitButton * button, gpointer data);
+
+static gint moko_dialer_panel_signals[LAST_SIGNAL] = { 0 };
+
+static void
+moko_dialer_panel_class_init (MokoDialerPanelClass *class)
+{
+/*
+  GtkVBoxClass* vbox_class;
+
+  vbox_class= (GtkVBoxClass*) class;
+*/
+
+  GtkObjectClass *object_class;
+
+  object_class = (GtkObjectClass*) class;
+  class->moko_dialer_panel_input = NULL;
+  class->moko_dialer_panel_hold= NULL;  
+
+g_print("moko_dialer_panel:start signal register\n");
+  
+  moko_dialer_panel_signals[CLICKED_SIGNAL] = 
+  		g_signal_new ("user_input",
+               G_OBJECT_CLASS_TYPE (object_class),
+		G_SIGNAL_RUN_FIRST,
+		 G_STRUCT_OFFSET (MokoDialerPanelClass, moko_dialer_panel_input),
+               NULL,NULL,
+               g_cclosure_marshal_VOID__CHAR,
+		G_TYPE_NONE, 1,g_type_from_name("gchar"));
+
+  //                G_TYPE_NONE, 0);
+
+g_print("moko_dialer_panel:signal register end,got the id :%d\n", moko_dialer_panel_signals[CLICKED_SIGNAL]);
+
+  moko_dialer_panel_signals[HOLD_SIGNAL] = 
+  		g_signal_new ("user_hold",
+               G_OBJECT_CLASS_TYPE (object_class),
+		G_SIGNAL_RUN_FIRST,
+		 G_STRUCT_OFFSET (MokoDialerPanelClass, moko_dialer_panel_hold),
+               NULL,NULL,
+               g_cclosure_marshal_VOID__CHAR,
+		G_TYPE_NONE, 1,g_type_from_name("gchar"));
+
+  //                G_TYPE_NONE, 0);
+
+g_print("moko_dialer_panel:signal register end,got the id :%d\n", moko_dialer_panel_signals[HOLD_SIGNAL]);
+
+}
+
+
+static void
+moko_dialer_panel_init (MokoDialerPanel *moko_dialer_panel)
+{
+
+ gchar* left[4][3]=
+ 	{
+ 	{"1","2","3"},
+ 	{"4","5","6"},
+	{"7","8","9"},
+	{"*","0","#"} 	
+ 	};
+ 
+gchar* right[4][3]=
+{
+{"","ABC","DEF"},
+{"GHI","JKL","MNO"},
+{"PQRS","TUV","WXYZ"},
+{"+","p","w"}
+};
+
+ gchar leftchar[4][3]=
+ 	{
+ 	{'1','2','3'},
+ 	{'4','5','6'},
+	{'7','8','9'},
+	{'*','0','#'} 	
+ 	};
+
+gchar rightchar[4][3]=
+ 	{
+ 	{-1,-1,-1},
+ 	{-1,-1,-1},
+ 	{-1,-1,-1},
+	{'+','p','w'} 	
+ 	};	
+
+ 
+  GtkWidget *table;
+  gint i,j;
+  
+  table = gtk_table_new (4, 3, TRUE);
+  gtk_container_add (GTK_CONTAINER(moko_dialer_panel), table);
+  gtk_widget_show (table);
+
+  
+
+  for (i=0;i<4; i++)
+    for (j=0;j<3; j++)
+      {
+      
+	moko_dialer_panel->buttons[i][j] = moko_digit_button_new_with_labels(left[i][j],right[i][j]);
+	
+	moko_digit_button_set_numbers(moko_dialer_panel->buttons[i][j], leftchar[i][j],rightchar[i][j]);
+
+	gtk_table_attach_defaults (GTK_TABLE(table), moko_dialer_panel->buttons[i][j], j, j+1, i, i+1);
+
+
+/*	g_signal_connect (GTK_OBJECT (moko_dialer_panel->buttons[i][j]), "clicked",
+			    G_CALLBACK (moko_dialer_panel_clicked),moko_dialer_panel);
+			    */
+
+      g_signal_connect ((gpointer) moko_dialer_panel->buttons[i][j], "button_release_event",
+                    G_CALLBACK (moko_dialer_panel_pressed),
+                    moko_dialer_panel);
+	  
+	gtk_widget_set_size_request (moko_dialer_panel->buttons[i][j], 20, 20);
+	gtk_widget_show (moko_dialer_panel->buttons[i][j]);
+      }
+    
+}
+
+
+
+static void  moko_dialer_panel_pressed  (MokoDigitButton * button, GdkEventButton  *event,gpointer data)
+{
+
+MokoDialerPanel *moko_dialer_panel;
+
+//here! check it tomorrow!
+moko_dialer_panel=(MokoDialerPanel *)data;
+
+gchar value=-1;
+
+if(event->button==3)
+  { //right button
+	  value=moko_digit_button_get_right( button);
+	  if(value==-1)
+	  	{//button 1-9 pressed with hold , we emit another signal: HOLD_SIGNAL, with the para of the number
+		  value=moko_digit_button_get_left( button);	  	
+		  if(value!=-1)
+		  	{
+			g_signal_emit (moko_dialer_panel,   moko_dialer_panel_signals[HOLD_SIGNAL],0,value);		  	
+		  	}
+	  	}
+	  else
+	  	{//*, 0, # buttons are right clicked or pressed with hold
+		      if(value!=-1)
+			g_signal_emit (moko_dialer_panel,   moko_dialer_panel_signals[CLICKED_SIGNAL],0,value);
+	  	
+	  	}
+
+  }
+else if(event->button==1)
+  {//left button
+	  value=moko_digit_button_get_left( button);
+      if(value!=-1)
+	g_signal_emit (moko_dialer_panel,   moko_dialer_panel_signals[CLICKED_SIGNAL],0,value);
+
+  }
+
+
+  return;
+}
+
+
+
+
+GtkWidget*      moko_dialer_panel_new()
+{
+MokoDialerPanel * dp;
+
+dp=(MokoDialerPanel * )g_object_new (MOKO_TYPE_DIALER_PANEL, NULL);
+return GTK_WIDGET(dp);
+
+}
+
+ 

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-dialer-panel.h
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-dialer-panel.h	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-dialer-panel.h	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,73 @@
+/* moko-dialer-panel.h
+ *
+ *  Authored By Tony Guan<tonyguan at fic-sh.com.cn>
+ *
+ *  Copyright (C) 2006 FIC Shanghai Lab
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Public License as published by
+ *  the Free Software Foundation; version 2.1 of the license.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Public License for more details.
+ *
+ *  Current Version: $Rev$ ($Date) [$Author: Tony Guan $]
+ */
+ #ifndef _MOKO_DIALER_PANEL_H_
+#define _MOKO_DIALER_PANEL_H_
+
+
+
+
+#include <gdk/gdk.h>
+#include <gtk/gtkvbox.h>
+#include "moko-digit-button.h"
+#include <glib-object.h>
+#include <gtk/gtktable.h>
+#include <gtk/gtkobject.h>
+#include <gtk/gtksignal.h>
+G_BEGIN_DECLS
+
+#define MOKO_TYPE_DIALER_PANEL                (moko_dialer_panel_get_type())
+#define MOKO_DIALER_PANEL (obj)                 (G_TYPE_CHECK_INSTANCE_CAST ((obj), MOKO_TYPE_DIALER_PANEL, MokoDialerPanel))
+#define MOKO_DIALER_PANEL_CLASS(klass)         (G_TYPE_CHECK_CLASS_CAST ((klass),MOKO_TYPE_DIALER_PANEL,MokoDialerPanelClass))
+#define MOKO_IS_DIALER_PANEL(obj)              (G_TYPE_CHECK_INSTANCE_TYPE ((obj), MOKO_TYPE_DIALER_PANEL))
+#define MOKO_IS_DIALER_PANEL_CLASS(klass)      (G_TYPE_CHECK_CLASS_TYPE ((klass), MOKO_TYPE_DIALER_PANEL))
+#define MOKO_DIALER_PANEL_GET_CLASS(obj)       (G_TYPE_INSTANCE_GET_CLASS ((obj), MOKO_TYPE_DIALER_PANEL, MokoDialerPanelClass))
+
+
+
+typedef struct _MokoDialerPanelClass   MokoDialerPanelClass;
+
+typedef struct _MokoDialerPanel        MokoDialerPanel;
+struct _MokoDialerPanel
+{
+  GtkVBox vbox;
+  GtkWidget *buttons[4][3];
+};
+
+struct _MokoDialerPanelClass
+{
+  GtkVBoxClass parent_class;
+  void (* moko_dialer_panel_input) (MokoDialerPanel *moko_dialer_panel,gchar parac);
+  void (* moko_dialer_panel_hold) (MokoDialerPanel *moko_dialer_panel,gchar parac);
+};
+
+
+void	       moko_dialer_panel_clear           (MokoDialerPanel *moko_dialer_panel);
+
+GType          moko_dialer_panel_get_type         (void) ;
+
+GtkWidget*      moko_dialer_panel_new();
+
+
+
+
+
+G_END_DECLS
+
+#endif // 
+
+

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-digit-button.c
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-digit-button.c	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-digit-button.c	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,192 @@
+/*  moko-button-digit.c
+ *
+ *  Authored By Tony Guan<tonyguan at fic-sh.com.cn>
+ *
+ *  Copyright (C) 2006 FIC Shanghai Lab
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Public License as published by
+ *  the Free Software Foundation; version 2.1 of the license.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Public License for more details.
+ *
+ *  Current Version: $Rev$ ($Date) [$Author: Tony Guan $]
+ */
+
+
+
+//#include "moko-application.h"
+
+#include "moko-digit-button.h"
+#include <gtk/gtkwindow.h>
+#include <gtk/gtk.h>
+#include <gtk/gtkbutton.h>
+
+
+G_DEFINE_TYPE (MokoDigitButton, moko_digit_button, GTK_TYPE_BUTTON)
+
+
+#define MOKO_DIGIT_BUTTON_GET_PRIVATE(o)   (G_TYPE_INSTANCE_GET_PRIVATE ((o), MOKO_TYPE_DIGIT_BUTTON, MokoDigitButtonPrivate))
+
+
+
+struct _MokoDigitButtonPrivate
+{
+
+  GtkWidget * labelDigit;
+  GtkWidget * labelAcrobat;
+  gchar leftclickdigit;
+  gchar rightclickdigit;
+  
+};
+
+
+
+typedef struct _MokoDigitButtonPrivate MokoDigitButtonPrivate;
+
+GtkWidget*      moko_digit_button_new()
+{
+
+//g_print("moko_digit_button_new\n");
+// return (GTK_WIDGET(g_object_new (MOKO_TYPE_DIGIT_BUTTON, NULL)));
+return moko_digit_button_new_with_labels("1","ABC");
+}
+
+
+/**
+ * @brief new a MokoDigitButton with the 2 strings.
+ * @param string_digit  the left digit part of the button. such as '1','2'...'0'
+ * @param string_acrobat  the right acrobat part of the button, such as 'ABC' etc.
+ */
+GtkWidget*      moko_digit_button_new_with_labels(const gchar * string_digit, const gchar * string_acrobat)
+{
+
+
+ MokoDigitButton * digitbutton = ( MokoDigitButton * )g_object_new (MOKO_TYPE_DIGIT_BUTTON, NULL);
+
+  gtk_widget_show (GTK_WIDGET(digitbutton));
+  gtk_widget_set_size_request (digitbutton, 64, 64);
+
+  GtkWidget * hbox = gtk_hbox_new (TRUE, 0);
+  gtk_widget_show (hbox);
+  gtk_container_add (GTK_CONTAINER (digitbutton), hbox);
+
+
+  GtkWidget * vbox = gtk_vbox_new (TRUE, 0);
+  gtk_widget_show (vbox);
+  gtk_box_pack_start (GTK_BOX (hbox), vbox, TRUE, TRUE, 0);
+
+  GtkWidget* labelDigit = gtk_label_new (string_digit);
+  gtk_widget_show (labelDigit);
+  gtk_box_pack_start (GTK_BOX (vbox), labelDigit, TRUE, TRUE, 0);
+
+  GtkWidget* alignment = gtk_alignment_new (0, 1, 1, 0.3);
+  gtk_widget_show (alignment);
+  gtk_box_pack_start (GTK_BOX (hbox), alignment, TRUE, TRUE, 0);
+
+  GtkWidget * labelAcrobat = gtk_label_new (string_acrobat);
+  gtk_widget_show (labelAcrobat);
+  gtk_container_add (GTK_CONTAINER (alignment), labelAcrobat);
+  gtk_widget_set_size_request (labelAcrobat, 0, 0);
+  gtk_label_set_justify (GTK_LABEL (labelAcrobat), GTK_JUSTIFY_RIGHT);
+
+  gtk_widget_set_name( GTK_WIDGET(digitbutton), "mokofingerbutton-dialer" );
+
+ MokoDigitButtonPrivate* priv = ( MokoDigitButtonPrivate*)MOKO_DIGIT_BUTTON_GET_PRIVATE(digitbutton);
+
+ priv->labelDigit=labelDigit;
+ priv->labelAcrobat=labelAcrobat;
+
+//g_print("moko_digit_button_new_with_labels:%s,%s\n",string_digit,string_acrobat);
+
+ return GTK_WIDGET(digitbutton);
+
+}
+
+gboolean moko_digit_button_set_numbers(GtkWidget* widget,gchar left, gchar right)
+{
+
+g_return_val_if_fail(MOKO_IS_DIGIT_BUTTON(widget),FALSE);
+ MokoDigitButtonPrivate* priv = ( MokoDigitButtonPrivate*)MOKO_DIGIT_BUTTON_GET_PRIVATE(widget);
+g_return_val_if_fail(priv!=NULL,FALSE);
+
+ priv->leftclickdigit=left;
+ priv->rightclickdigit=right;
+// g_print("moko_digit_button_set_numbers:%c,%d\n",left,right);
+return TRUE;
+}
+	
+static void
+moko_digit_button_class_init(MokoDigitButtonClass *klass)
+{
+//g_print("moko_digit_button_class_init\n");
+
+// GObjectClass *object_class = G_OBJECT_CLASS (klass);
+
+ g_type_class_add_private (klass, sizeof (MokoDigitButtonPrivate));
+
+return;
+}
+
+/**
+ * @brief  set the digit button digit field to be -1.
+ */
+static void
+moko_digit_button_init(MokoDigitButton *self)
+{
+
+ MokoDigitButtonPrivate* priv = MOKO_DIGIT_BUTTON_GET_PRIVATE(self);
+ priv->labelDigit=0;
+ priv->labelAcrobat=0;
+ priv->leftclickdigit=-1;
+ priv->rightclickdigit=-1;
+//g_print("moko_digit_button_init\n");
+return;
+}
+
+gchar moko_digit_button_get_left(MokoDigitButton* button)
+{
+ MokoDigitButtonPrivate* priv = MOKO_DIGIT_BUTTON_GET_PRIVATE(button);
+// g_print("moko_digit_button_get_left:%c\n",priv->leftclickdigit);
+return(priv->leftclickdigit);
+
+}
+gchar moko_digit_button_get_right(MokoDigitButton* button)
+{
+ MokoDigitButtonPrivate* priv = MOKO_DIGIT_BUTTON_GET_PRIVATE(button);
+// g_print("moko_digit_button_get_right:%c\n",priv->rightclickdigit);
+return(priv->rightclickdigit);
+
+}
+
+/*
+GType moko_digit_button_get_type(void)
+{
+    static GType self_type = 0;
+
+    if (!self_type)
+    {
+        static const GTypeInfo f_info =
+        {
+            sizeof (MokoDigitButtonClass),
+            NULL, // base_init 
+            NULL, // base_finalize
+            (GClassInitFunc) moko_digit_button_class_init,
+            NULL, // class_finalize 
+            NULL, // class_data 
+            sizeof (MokoDigitButton),
+            0,
+            (GInstanceInitFunc) moko_digit_button_init,
+        };
+
+       // add the type of your parent class here 
+        self_type = g_type_register_static(GTK_TYPE_BUTTON, "MokoDigitButton", &f_info, 0);
+    }
+
+    return self_type;
+}
+
+*/

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-digit-button.h
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-digit-button.h	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/src/moko-digit-button.h	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,68 @@
+/*  moko-button-digit.h
+ *
+ *  Authored By Tony Guan<tonyguan at fic-sh.com.cn>
+ *
+ *  Copyright (C) 2006 FIC Shanghai Lab
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Public License as published by
+ *  the Free Software Foundation; version 2.1 of the license.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Public License for more details.
+ *
+ *  Current Version: $Rev$ ($Date) [$Author: Tony Guan $]
+ */
+
+#ifndef _MOKO_DIGIT_BUTTON_H_
+#define _MOKO_DIGIT_BUTTON_H_
+
+#include <gtk/gtkbutton.h>
+
+#include <glib-object.h>
+
+G_BEGIN_DECLS
+
+
+#define MOKO_TYPE_DIGIT_BUTTON                 (moko_digit_button_get_type())
+#define MOKO_DIGIT_BUTTON(obj)                 (G_TYPE_CHECK_INSTANCE_CAST ((obj), MOKO_TYPE_DIGIT_BUTTON, MokoDigitButton))
+#define MOKO_DIGIT_BUTTON_CLASS(klass)         (G_TYPE_CHECK_CLASS_CAST ((klass), MOKO_TYPE_DIGIT_BUTTON, MokoDigitButtonClass))
+#define MOKO_IS_DIGIT_BUTTON(obj)              (G_TYPE_CHECK_INSTANCE_TYPE ((obj), MOKO_TYPE_DIGIT_BUTTON))
+#define MOKO_IS_DIGIT_BUTTON_CLASS(klass)      (G_TYPE_CHECK_CLASS_TYPE ((klass), MOKO_TYPE_DIGIT_BUTTON))
+#define MOKO_DIGIT_BUTTON_GET_CLASS(obj)       (G_TYPE_INSTANCE_GET_CLASS ((obj), MOKO_TYPE_DIGIT_BUTTON, MokoDigitButtonClass))
+
+
+
+typedef struct _MokoDigitButtonClass   MokoDigitButtonClass;
+
+typedef struct _MokoDigitButton        MokoDigitButton;
+struct _MokoDigitButton
+{
+  GtkButton gtkbutton;
+};
+
+struct _MokoDigitButtonClass
+{
+  GtkButtonClass        parent_class;
+};
+
+
+GType          moko_digit_button_get_type         (void) ;
+
+gboolean moko_digit_button_set_numbers(GtkWidget* widget,gchar left, gchar right);
+	
+GtkWidget*      moko_digit_button_new_with_labels(const gchar * label1, const gchar * label2);
+
+GtkWidget*      moko_digit_button_new();
+
+gchar moko_digit_button_get_right(MokoDigitButton* button);
+
+gchar moko_digit_button_get_left(MokoDigitButton* button);
+
+G_END_DECLS
+
+#endif // _MOKO_FINGER_WHEEL_H_
+
+

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/src/openmoko-dialer-main.c
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/src/openmoko-dialer-main.c	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/src/openmoko-dialer-main.c	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,152 @@
+/*   openmoko-dialer.c
+ *
+ *  Authored By Tony Guan<tonyguan at fic-sh.com.cn>
+ *
+ *  Copyright (C) 2006 FIC Shanghai Lab
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Public License as published by
+ *  the Free Software Foundation; version 2.1 of the license.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Public License for more details.
+ *
+ *  Current Version: $Rev$ ($Date) [$Author: Tony Guan $]
+ */
+#include <libmokoui/moko-application.h>
+#include <libmokoui/moko-finger-tool-box.h>
+#include <libmokoui/moko-finger-window.h>
+#include <libmokoui/moko-finger-wheel.h>
+
+#include <gtk/gtkalignment.h>
+#include <gtk/gtkbutton.h>
+#include <gtk/gtkhbox.h>
+#include <gtk/gtklabel.h>
+#include <gtk/gtkmain.h>
+#include <gtk/gtkmenu.h>
+#include <gtk/gtktogglebutton.h>
+#include <gtk/gtkvbox.h>
+#include "moko-digit-button.h"
+#include "moko-dialer-panel.h"
+#include "openmoko-dialer-main.h"
+void
+on_dialer_panel_user_input(GtkWidget * widget,gchar parac,
+                                        gpointer         user_data)
+{
+
+g_print("on_dialer_panel_user_input:%c\n", parac);
+}
+void
+on_dialer_panel_user_hold(GtkWidget * widget,gchar parac,
+                                        gpointer         user_data)
+{
+
+g_print("on_dialer_panel_user_hold:%c\n", parac);
+}
+
+
+int main( int argc, char** argv )
+{
+
+	GtkVBox* vbox = NULL;
+	static MokoFingerToolBox* tools = NULL;
+    /* Initialize GTK+ */
+    gtk_init( &argc, &argv );
+
+    /* application object */
+    MokoApplication* app = MOKO_APPLICATION(moko_application_get_instance());
+    g_set_application_name( "OpenMoko Dialer" );
+
+    /* main window */
+    MokoFingerWindow* window = MOKO_FINGER_WINDOW(moko_finger_window_new());
+
+    /* application menu */
+    GtkMenu* appmenu = GTK_MENU(gtk_menu_new());
+
+    GtkMenuItem* closeitem = GTK_MENU_ITEM(gtk_menu_item_new_with_label( "Close" ));
+    g_signal_connect( G_OBJECT(closeitem), "activate", G_CALLBACK(gtk_main_quit), NULL );
+    
+    gtk_menu_shell_append( appmenu, closeitem );
+    moko_finger_window_set_application_menu( window, appmenu );
+
+    /* connect close event */
+    g_signal_connect( G_OBJECT(window), "delete_event", G_CALLBACK( gtk_main_quit ), NULL );
+
+    /* contents */
+    vbox = gtk_vbox_new( FALSE, 0 );
+
+/*
+    GtkLabel* label1 = gtk_label_new( "Populate this area with finger widgets\n \nThere are three types of finger buttons:" );
+
+    GtkLabel* label2 = gtk_label_new( "Orange button toggles finger scrolling wheel\nBlack button toggles finger toolbar\nDialer Button does nothing :)" );
+
+
+
+    GtkButton* button1 = gtk_button_new();
+    g_signal_connect( G_OBJECT(button1), "clicked", G_CALLBACK(cb_orange_button_clicked), window );
+    gtk_widget_set_name( GTK_WIDGET(button1), "mokofingerbutton-orange" );
+    gtk_box_pack_start( GTK_BOX(hbox), GTK_WIDGET(button1), TRUE, TRUE, 5 );
+
+    GtkButton* button2 = gtk_button_new();
+    //FIXME toggle buttons look odd... needs working on styling
+    //gtk_toggle_button_set_mode (GTK_TOGGLE_BUTTON (button2), TRUE);
+    g_signal_connect( G_OBJECT(button2), "clicked", G_CALLBACK(cb_dialer_button_clicked), window );
+    gtk_widget_set_name( GTK_WIDGET(button2), "mokofingerbutton-dialer" );
+    gtk_box_pack_start( GTK_BOX(hbox), GTK_WIDGET(button2), TRUE, TRUE, 5 );
+
+    GtkButton* button3 = gtk_button_new();
+    g_signal_connect( G_OBJECT(button3), "clicked", G_CALLBACK(cb_black_button_clicked), window );
+    gtk_widget_set_name( GTK_WIDGET(button3), "mokofingerbutton-black" );
+    gtk_box_pack_start( GTK_BOX(hbox), GTK_WIDGET(button3), TRUE, TRUE, 5 );
+
+    MokoDigitButton*  mokobutton=moko_digit_button_new_with_labels("1","ABC");
+    moko_digit_button_set_numbers(mokobutton,'1', '*');
+    gtk_box_pack_start( GTK_BOX(hbox), GTK_WIDGET(mokobutton), TRUE, TRUE, 5 );
+
+
+*/
+
+    GtkHBox* hbox = gtk_hbox_new( TRUE, 10 );
+    MokoDialerPanel* mokodialerpanel=moko_dialer_panel_new();
+
+    g_signal_connect (GTK_OBJECT (mokodialerpanel), "user_input",
+			    G_CALLBACK (on_dialer_panel_user_input),0);
+
+  
+    g_signal_connect (GTK_OBJECT (mokodialerpanel), "user_hold",
+			    G_CALLBACK ( on_dialer_panel_user_hold),0);
+   	
+    gtk_box_pack_start( GTK_BOX(hbox), GTK_WIDGET(mokodialerpanel), TRUE, TRUE, 5 );
+
+
+    MokoDigitButton*  mokobutton=moko_digit_button_new_with_labels("1","ABC");
+    moko_digit_button_set_numbers(mokobutton,'1', '*');
+    gtk_box_pack_start( GTK_BOX(vbox), GTK_WIDGET(mokobutton), FALSE,FALSE, 5 );
+
+    gtk_box_pack_start( GTK_BOX(vbox), GTK_WIDGET(hbox), TRUE, TRUE, 5 );
+	
+
+    moko_finger_window_set_contents( window, GTK_WIDGET(vbox) );
+/*
+
+    MokoDigitButton*  mokobutton=moko_digit_button_new_with_labels("1","ABC");
+    moko_digit_button_set_numbers(mokobutton,'1', '*');
+    gtk_box_pack_start( GTK_BOX(hbox), GTK_WIDGET(mokobutton), TRUE, TRUE, 5 );
+
+ 
+    gtk_box_pack_start( vbox, GTK_WIDGET(label1), TRUE, TRUE, 0 );
+    gtk_box_pack_start( vbox, GTK_WIDGET(hbox), TRUE, TRUE, 0 );
+    gtk_box_pack_start( vbox, GTK_WIDGET(label2), TRUE, TRUE, 0 );
+
+
+*/
+    /* show everything and run main loop */
+    gtk_widget_show_all( GTK_WIDGET(window) );
+
+    gtk_main();
+ 
+
+    return 0;
+}

Added: trunk/src/target/OM-2007/applications/openmoko-dialer/src/openmoko-dialer-main.h
===================================================================
--- trunk/src/target/OM-2007/applications/openmoko-dialer/src/openmoko-dialer-main.h	2006-12-07 09:37:28 UTC (rev 332)
+++ trunk/src/target/OM-2007/applications/openmoko-dialer/src/openmoko-dialer-main.h	2006-12-07 10:55:53 UTC (rev 333)
@@ -0,0 +1,17 @@
+/*  openmoko-dialer.h
+ *
+ *  Authored By Tony Guan<tonyguan at fic-sh.com.cn>
+ *
+ *  Copyright (C) 2006 FIC Shanghai Lab
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU Public License as published by
+ *  the Free Software Foundation; version 2.1 of the license.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU Public License for more details.
+ *
+ *  Current Version: $Rev$ ($Date) [$Author: Tony Guan $]
+ */





More information about the commitlog mailing list