r148 - in trunk/oe: conf/machine packages packages/base-files packages/base-files/base-files packages/base-files/base-files/fic-gta01 packages/linux packages/tasks packages/uboot packages/uboot/files
Mon Oct 30 11:47:20 CET 2006
Author:
Date: 2006-10-30 10:47:19 +0000 (Mon, 30 Oct 2006)
New Revision: 148
Added:
trunk/oe/conf/machine/fic-gta01.conf
trunk/oe/packages/base-files/base-files/fic-gta01/
trunk/oe/packages/base-files/base-files/fic-gta01/fstab
trunk/oe/packages/linux/gta01-kernel_2.6.bb
trunk/oe/packages/linux/linux-gta01_2.6.17.7.bb
trunk/oe/packages/s3c2410-utils/
trunk/oe/packages/uboot/files/gta01_nand.h
trunk/oe/packages/uboot/files/u-boot-20060907-gta01.patch
trunk/oe/packages/uboot/uboot-gta01_0.0+cvs20060907.bb
Removed:
trunk/oe/packages/initscripts/
trunk/oe/packages/qt2410-utils/
Modified:
trunk/oe/conf/machine/armzone-qt2410.conf
trunk/oe/packages/base-files/base-files_3.0.14.bb
trunk/oe/packages/linux/linux-qt2410_2.6.17.7.bb
trunk/oe/packages/tasks/task-openmoko.bb
Log:
oe: add support for the fic-gta01 machine
Modified: trunk/oe/conf/machine/armzone-qt2410.conf
===================================================================
--- trunk/oe/conf/machine/armzone-qt2410.conf 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/conf/machine/armzone-qt2410.conf 2006-10-30 10:47:19 UTC (rev 148)
@@ -21,6 +21,7 @@
# used by some images
ROOT_FLASH_SIZE = "60M"
+
# extra jffs2 tweaks
EXTRA_IMAGECMD_jffs2 = "--eraseblock=0x4000 --pad -n"
Added: trunk/oe/conf/machine/fic-gta01.conf
===================================================================
--- trunk/oe/conf/machine/fic-gta01.conf 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/conf/machine/fic-gta01.conf 2006-10-30 10:47:19 UTC (rev 148)
@@ -0,0 +1,32 @@
+#-----------------------------------------------------------------------------
+#@TYPE: Machine
+#@NAME: FIC GTA-01
+#@DESCRIPTION: Machine configuration for the FIC GTA01 GSM phone
+#-----------------------------------------------------------------------------
+
+TARGET_ARCH = "arm"
+IPKG_EXTRA_ARCHS = "armv4t"
+
+PREFERRED_PROVIDER_virtual/kernel = "gta01-kernel"
+
+MACHINE_FEATURES = "kernel26 apm alsa bluetooth usbgadget"
+
+MACHINE_EXTRA_RDEPENDS = ""
+MACHINE_EXTRA_RRECOMMENDS = ""
+
+MACHINE_TASK_PROVIDER = "task-base"
+
+# used by sysvinit_2
+SERIAL_CONSOLE = "-h 115200 ttySAC0"
+
+# used by some images
+ROOT_FLASH_SIZE = "60M"
+
+# extra jffs2 tweaks
+EXTRA_IMAGECMD_jffs2 = "--eraseblock=0x4000 --pad -n"
+
+# build tools
+EXTRA_IMAGEDEPENDS += "sjf2410-linux-native"
+
+# tune for S3C24x0
+include conf/machine/include/tune-arm920t.conf
Added: trunk/oe/packages/base-files/base-files/fic-gta01/fstab
===================================================================
--- trunk/oe/packages/base-files/base-files/fic-gta01/fstab 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/packages/base-files/base-files/fic-gta01/fstab 2006-10-30 10:47:19 UTC (rev 148)
@@ -0,0 +1,16 @@
+# Root and Pseudo
+/dev/mtdblock4 / jffs2 rw,noatime 1 1
+proc /proc proc defaults 0 0
+
+# devpts?
+# usb?
+
+# Temporary
+tmpfs /var tmpfs defaults 0 0
+tmpfs /media/ram tmpfs defaults 0 0
+
+# microSD slot
+/dev/mmcblk0p1 /media/card auto defaults,sync,noauto 0 0
+
+# USB Storage
+/dev/sda1 /media/hdd vfat noauto,umask=000,noatime,iocharset=utf8,codepage=932 0 0
Modified: trunk/oe/packages/base-files/base-files_3.0.14.bb
===================================================================
--- trunk/oe/packages/base-files/base-files_3.0.14.bb 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/packages/base-files/base-files_3.0.14.bb 2006-10-30 10:47:19 UTC (rev 148)
@@ -1,7 +1,7 @@
DESCRIPTION = "Miscellaneous files for the base system."
SECTION = "base"
PRIORITY = "required"
-PR = "r56"
+PR = "r57"
LICENSE = "GPL"
SRC_URI = " \
Added: trunk/oe/packages/linux/gta01-kernel_2.6.bb
===================================================================
--- trunk/oe/packages/linux/gta01-kernel_2.6.bb 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/packages/linux/gta01-kernel_2.6.bb 2006-10-30 10:47:19 UTC (rev 148)
@@ -0,0 +1 @@
+require linux-gta01_2.6.17.7.bb
Added: trunk/oe/packages/linux/linux-gta01_2.6.17.7.bb
===================================================================
--- trunk/oe/packages/linux/linux-gta01_2.6.17.7.bb 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/packages/linux/linux-gta01_2.6.17.7.bb 2006-10-30 10:47:19 UTC (rev 148)
@@ -0,0 +1,98 @@
+DESCRIPTION = "2.6 Linux Development Kernel for FIC GTA01"
+SECTION = "kernel"
+AUTHOR = "Harald Welte <hwelte at hmw-consulting.de>"
+HOMEPAGE = "N/A"
+LICENSE = "GPL"
+DEPENDS += "quilt-native uboot-gta01"
+PR = "r4"
+
+inherit kernel
+
+FILESDIR = "${@os.path.dirname(bb.data.getVar('FILE',d,1))}/linux-gta01"
+HWSRC = "http://people.gta01.hmw-consulting.de/laforge/src/kernel/20060806"
+
+##############################################################
+# source and patches
+#
+SRC_URI = "http://people.gta01.hmw-consulting.de/laforge/tmp/linux-2.6.17.7-gta01-lcm.tar.bz2"
+ file://defconfig-${MACHINE}"
+S = "${WORKDIR}/linux-2.6.17.7"
+
+##############################################################
+# kernel image resides on a seperate flash partition (for now)
+#
+FILES_kernel-image = ""
+ALLOW_EMPTY = "1"
+
+COMPATIBLE_HOST = "arm.*-linux"
+COMPATIBLE_MACHINE = 'fic-gta01'
+
+CMDLINE_CON = "console=ttySAC0,115200n8"
+#CMDLINE_ROOT = "root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5"
+# uncomment if you want to boot over NFS
+#CMDLINE_ROOT = "root=/dev/nfs nfsroot=192.168.1.10:/export/opie-image rootdelay=5 3"
+# uncomment to enable dyntick
+#CMDLINE_OTHER = "dyntick=enable"
+CMDLINE_DEBUG = '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug",d)}'
+CMDLINE_IP = "ip=192.168.1.2:192.168.1.10:192.168.1.10:255.255.255.0:ezx:usb0:off"
+CMDLINE = "${CMDLINE_CON} ${CMDLINE_ROOT} ${CMDLINE_IP} ${CMDLINE_ROTATE} ${CMDLINE_OTHER} ${CMDLINE_DEBUG}"
+
+###############################################################
+# module configs specific to this kernel
+#
+#module_autoload_pxaficp_ir = "pxaficp_ir"
+#module_autoload_snd-pcm-oss = "snd-pcm-oss"
+
+do_prepatch() {
+ mv ${WORKDIR}/patches ${S}/patches && cd ${S} && quilt push -av
+ rm -Rf patches .pc
+}
+
+do_configure() {
+ #install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+
+ if [ ! -e ${WORKDIR}/defconfig-${MACHINE} ]; then
+ die "No default configuration for ${MACHINE} available."
+ fi
+
+ echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
+
+ if [ "${TARGET_OS}" == "linux-gnueabi" ]; then
+ echo "CONFIG_AEABI=y" >> ${S}/.config
+ echo "CONFIG_OABI_COMPAT=y" >> ${S}/.config
+ else
+ echo "# CONFIG_AEABI is not set" >> ${S}/.config
+ echo "# CONFIG_OABI_COMPAT is not set" >> ${S}/.config
+ fi
+
+ sed -e '/CONFIG_AEABI/d' \
+ -e '/CONFIG_OABI_COMPAT=/d' \
+ -e '/CONFIG_CMDLINE=/d' \
+ -e '/CONFIG_MTD_MTDRAM_SA1100=/d' \
+ -e '/CONFIG_MTDRAM_TOTAL_SIZE=/d' \
+ -e '/CONFIG_MTDRAM_ERASE_SIZE=/d' \
+ -e '/CONFIG_MTDRAM_ABS_POS=/d' \
+ '${WORKDIR}/defconfig-${MACHINE}' >>'${S}/.config'
+
+ yes '' | oe_runmake oldconfig
+}
+
+###############################################################
+# put into deploy directory and append u-boot header
+#
+do_deploy() {
+ install -d ${DEPLOY_DIR_IMAGE}
+ install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${PV}-${MACHINE}-${DATETIME}.bin
+ tar -cvzf ${DEPLOY_DIR_IMAGE}/modules-${KERNEL_RELEASE}-${MACHINE}.tgz -C ${D} lib
+ arm-linux-objcopy -O binary -R .note -R .comment -S vmlinux linux.bin
+ rm -f linux.bin.gz
+ gzip -9 linux.bin
+ uboot-mkimage -A arm -O linux -T kernel -C gzip -a 30008000 -e 30008000 -n "Kernel Image QT2410" -d linux.bin.gz ${DEPLOY_DIR_IMAGE}/uImage-${PV}-${MACHINE}-${DATETIME}.bin
+ rm -f linux.bin.gz
+}
+
+do_deploy[dirs] = "${S}"
+
+addtask prepatch before do_patch after do_unpack
+addtask deploy before do_package after do_install
+
Modified: trunk/oe/packages/linux/linux-qt2410_2.6.17.7.bb
===================================================================
--- trunk/oe/packages/linux/linux-qt2410_2.6.17.7.bb 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/packages/linux/linux-qt2410_2.6.17.7.bb 2006-10-30 10:47:19 UTC (rev 148)
@@ -30,7 +30,7 @@
COMPATIBLE_HOST = "arm.*-linux"
COMPATIBLE_MACHINE = 'armzone-qt2410'
-CMDLINE_CON = "console=ttyS0,115200n8"
+CMDLINE_CON = "console=ttySAC0,115200n8"
#CMDLINE_ROOT = "root=/dev/mmcblk0p1 rootfstype=ext3 rootdelay=5"
# uncomment if you want to boot over NFS
#CMDLINE_ROOT = "root=/dev/nfs nfsroot=192.168.1.10:/export/opie-image rootdelay=5 3"
Copied: trunk/oe/packages/s3c2410-utils (from rev 117, trunk/oe/packages/qt2410-utils)
Modified: trunk/oe/packages/tasks/task-openmoko.bb
===================================================================
--- trunk/oe/packages/tasks/task-openmoko.bb 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/packages/tasks/task-openmoko.bb 2006-10-30 10:47:19 UTC (rev 148)
@@ -189,4 +189,6 @@
diffutils \
libtool \
pkgconfig \
+ \
+ xoo \
"
Added: trunk/oe/packages/uboot/files/gta01_nand.h
===================================================================
--- trunk/oe/packages/uboot/files/gta01_nand.h 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/packages/uboot/files/gta01_nand.h 2006-10-30 10:47:19 UTC (rev 148)
@@ -0,0 +1,233 @@
+/*
+ * (C) Copyright 2006 Harald Welte <hwelte at hmw-consulting.de>
+ *
+ * Configuation settings for the FIC GTA01 Linux GSM phone
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* we want to start u-boot directly from within NAND flash */
+#define CONFIG_S3C2410_NAND_BOOT 1
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
+#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
+#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
+
+/* input clock of PLL */
+#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */
+
+
+#define USE_920T_MMU 1
+#define CONFIG_USE_IRQ 1
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */
+//#define CONFIG_HWFLOW 1
+
+/************************************************************
+ * RTC
+ ************************************************************/
+#define CONFIG_RTC_S3C24X0 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE 115200
+
+/***********************************************************
+ * Command definition
+ ***********************************************************/
+#define CONFIG_COMMANDS (\
+ CFG_CMD_BDI | \
+ CFG_CMD_LOADS | \
+ CFG_CMD_LAODB | \
+ CFG_CMD_IMI | \
+ CFG_CMD_CACHE | \
+ CFG_CMD_MEMORY | \
+ CFG_CMD_ENV | \
+ /* CFG_CMD_IRQ | */ \
+ CFG_CMD_BOOTD | \
+ CFG_CMD_CONSOLE | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_RUN | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_I2C | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_IMMAP | \
+ CFG_CMD_DATE | \
+ CFG_CMD_AUTOSCRIPT | \
+ CFG_CMD_BSP | \
+ CFG_CMD_ELF | \
+ CFG_CMD_MISC | \
+ CFG_CMD_USB | \
+ CFG_CMD_JFFS2 | \
+ CFG_CMD_DIAG | \
+ /* CFG_CMD_HWFLOW | */ \
+ CFG_CMD_SAVES | \
+ CFG_CMD_NAND | \
+ CFG_CMD_PORTIO | \
+ CFG_CMD_MMC | \
+ CFG_CMD_FAT | \
+ CFG_CMD_EXT2 | \
+ 0)
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
+/*#define CONFIG_BOOTFILE "elinos-lart" */
+#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000"
+
+#define CONFIG_DOS_PARTITION 1
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
+/* what's this ? it's not used anywhere */
+#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
+#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
+
+#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR 0x33000000 /* default load address */
+
+/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
+/* it to wrap 100 times (total 1562500) to get 1 sec. */
+#define CFG_HZ 1562500
+
+/* valid baudrates */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+#define CONFIG_USB_OHCI 1
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
+#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+#if 1
+#define CFG_NO_FLASH 1
+#else
+#define CFG_MAX_FLASH_SECT 1
+#define CFG_MAX_FLASH_BANKS 1
+#endif
+
+#define CFG_ENV_IS_IN_NAND 1
+#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
+#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
+
+#define NAND_MAX_CHIPS 1
+#define CFG_NAND_BASE 0x4e000000
+#define CFG_MAX_NAND_DEVICE 1
+
+#define CONFIG_MMC 1
+#define CFG_MMC_BASE 0xff000000
+
+/* EXT2 driver */
+#define CONFIG_EXT2 1
+
+/* FAT driver in u-boot is broken currently */
+#define CONFIG_FAT 1
+#define CONFIG_SUPPORT_VFAT 1
+
+/* JFFS2 driver */
+#define CONFIG_JFFS2_NAND 1
+#define CONFIG_JFFS2_NAND_DEV 0
+#define CONFIG_JFFS2_NAND_OFF 0x634000
+#define CONFIG_JFFS2_NAND_SIZE 0x39cc000
+
+/* ATAG configuration */
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_CMDLINE_TAG 1
+#if 0
+#define CONFIG_SERIAL_TAG 1
+#define CONFIG_REVISION_TAG 1
+#endif
+
+#define CONFIG_DRIVER_S3C24X0_I2C 1
+#define CONFIG_HARD_I2C 1
+#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50707 data sheet */
+#define CFG_I2C_SLAVE 0x7f
+
+
+#if 0
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_S3C2410
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+
+#define VIDEO_KBD_INIT_FCT 0
+#define VIDEO_TSTC_FCT serial_tstc
+#define VIDEO_GETC_FCT serial_getc
+
+#define LCD_VIDEO_ADDR 0x33d00000
+#endif
+
+#endif /* __CONFIG_H */
Added: trunk/oe/packages/uboot/files/u-boot-20060907-gta01.patch
===================================================================
--- trunk/oe/packages/uboot/files/u-boot-20060907-gta01.patch 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/packages/uboot/files/u-boot-20060907-gta01.patch 2006-10-30 10:47:19 UTC (rev 148)
@@ -0,0 +1,901 @@
+diff --exclude .git -Nru u-boot/Makefile u-boot.new/Makefile
+--- u-boot/Makefile 2006-08-11 23:19:07.000000000 +0200
++++ u-boot.new/Makefile 2006-10-26 13:02:41.000000000 +0200
+@@ -1641,6 +1641,9 @@
+ qt2410_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t qt2410 NULL s3c24x0
+
++gta01_config : unconfig
++ @./mkconfig $(@:_config=) arm arm920t gta01 NULL s3c24x0
++
+ scb9328_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
+
+diff --exclude .git -Nru u-boot/board/gta01/Makefile u-boot.new/board/gta01/Makefile
+--- u-boot/board/gta01/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ u-boot.new/board/gta01/Makefile 2006-10-25 17:21:44.000000000 +0200
+@@ -0,0 +1,47 @@
++#
++# (C) Copyright 2000, 2001, 2002
++# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
++#
++# See file CREDITS for list of people who contributed to this
++# project.
++#
++# This program is free software; you can redistribute it and/or
++# modify it under the terms of the GNU General Public License as
++# published by the Free Software Foundation; either version 2 of
++# the License, or (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++# MA 02111-1307 USA
++#
++
++include $(TOPDIR)/config.mk
++
++LIB = lib$(BOARD).a
++
++OBJS := gta01.o
++SOBJS := lowlevel_init.o
++
++$(LIB): $(OBJS) $(SOBJS)
++ $(AR) crv $@ $(OBJS) $(SOBJS)
++
++clean:
++ rm -f $(SOBJS) $(OBJS)
++
++distclean: clean
++ rm -f $(LIB) core *.bak .depend
++
++#########################################################################
++
++.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
++ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
++
++-include .depend
++
++#########################################################################
+diff --exclude .git -Nru u-boot/board/gta01/config.mk u-boot.new/board/gta01/config.mk
+--- u-boot/board/gta01/config.mk 1970-01-01 01:00:00.000000000 +0100
++++ u-boot.new/board/gta01/config.mk 2006-10-25 17:22:09.000000000 +0200
+@@ -0,0 +1,25 @@
++#
++# (C) Copyright 2002
++# Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
++# David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
++#
++# FIC GTA01 board with S3C2410X (ARM920T) cpu
++#
++# see http://www.samsung.com/ for more information on SAMSUNG
++#
++
++#
++# GTA01 has 1 bank of 64 MB DRAM
++#
++# 3000'0000 to 3400'0000
++#
++# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
++# optionally with a ramdisk at 3080'0000
++#
++# we load ourself to 33F8'0000
++#
++# download area is 3300'0000
++#
++
++
++TEXT_BASE = 0x33F80000
+diff --exclude .git -Nru u-boot/board/gta01/gta01.c u-boot.new/board/gta01/gta01.c
+--- u-boot/board/gta01/gta01.c 1970-01-01 01:00:00.000000000 +0100
++++ u-boot.new/board/gta01/gta01.c 2006-10-25 17:27:50.000000000 +0200
+@@ -0,0 +1,133 @@
++/*
++ * (C) 2006 by Harald Welte <hwelte at hmw-consulting.de>
++ *
++ * based on existing S3C2410 startup code in u-boot:
++ *
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Marius Groeger <mgroeger at sysgo.de>
++ *
++ * (C) Copyright 2002
++ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <s3c2410.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#if 1
++//#define M_MDIV 0xA1 /* Fout = 202.8MHz */
++//#define M_PDIV 0x3
++//#define M_SDIV 0x1
++#define M_MDIV 0x90 /* Fout = 202.8MHz */
++#define M_PDIV 0x7
++#define M_SDIV 0x0
++#else
++#define M_MDIV 0x5c /* Fout = 150.0MHz */
++#define M_PDIV 0x4
++#define M_SDIV 0x0
++#endif
++
++#if 1
++#define U_M_MDIV 0x78
++#define U_M_PDIV 0x2
++#define U_M_SDIV 0x3
++#else
++#define U_M_MDIV 0x48
++#define U_M_PDIV 0x3
++#define U_M_SDIV 0x2
++#endif
++
++static inline void delay (unsigned long loops)
++{
++ __asm__ volatile ("1:\n"
++ "subs %0, %1, #1\n"
++ "bne 1b":"=r" (loops):"0" (loops));
++}
++
++/*
++ * Miscellaneous platform dependent initialisations
++ */
++
++int board_init (void)
++{
++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++
++ /* to reduce PLL lock time, adjust the LOCKTIME register */
++ clk_power->LOCKTIME = 0xFFFFFF;
++
++ /* configure MPLL */
++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
++
++ /* some delay between MPLL and UPLL */
++ delay (4000);
++
++ /* configure UPLL */
++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
++
++ /* some delay between MPLL and UPLL */
++ delay (8000);
++
++ /* set up the I/O ports */
++ gpio->GPACON = 0x007FFFFF;
++
++ gpio->GPBCON = 0x00005056;
++ gpio->GPBUP = 0x000007FF;
++
++ gpio->GPCCON = 0xAAAA12A8;
++ gpio->GPCUP = 0x0000FFFF;
++
++ gpio->GPDCON = 0xAAAAAAAA;
++ gpio->GPDUP = 0x0000FFFF;
++
++ gpio->GPECON = 0xAAAAAAAA;
++ gpio->GPEUP = 0x0000FFFF;
++
++ gpio->GPFCON = 0x00002AA9;
++ gpio->GPFUP = 0x000000FF;
++
++ gpio->GPGCON = 0xA846F0C0;
++ gpio->GPGUP = 0x0000AFEF;
++
++ gpio->GPHCON = 0x0008FAAA;
++ gpio->GPHUP = 0x000007FF;
++
++ /* arch number of SMDK2410-Board */
++ gd->bd->bi_arch_number = MACH_TYPE_GTA01;
++
++ /* adress of boot parameters */
++ gd->bd->bi_boot_params = 0x30000100;
++
++ icache_enable();
++ dcache_enable();
++
++ return 0;
++}
++
++int dram_init (void)
++{
++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
++
++ return 0;
++}
+diff --exclude .git -Nru u-boot/board/gta01/lowlevel_init.S u-boot.new/board/gta01/lowlevel_init.S
+--- u-boot/board/gta01/lowlevel_init.S 1970-01-01 01:00:00.000000000 +0100
++++ u-boot.new/board/gta01/lowlevel_init.S 2006-10-25 17:20:42.000000000 +0200
+@@ -0,0 +1,171 @@
++/*
++ * Memory Setup stuff - taken from blob memsetup.S
++ *
++ * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw at its.tudelft.nl) and
++ * Jan-Derk Bakker (J.D.Bakker at its.tudelft.nl)
++ *
++ * Modified for the FIC GTA01 by Harald Welte <hwelte at hmw-consulting.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++
++#include <config.h>
++#include <version.h>
++
++
++/* some parameters for the board */
++
++/*
++ *
++ * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
++ *
++ * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar at sec.samsung.com>
++ *
++ */
++
++#define BWSCON 0x48000000
++
++/* BWSCON */
++#define DW8 (0x0)
++#define DW16 (0x1)
++#define DW32 (0x2)
++#define WAIT (0x1<<2)
++#define UBLB (0x1<<3)
++
++#define B1_BWSCON (DW32)
++#define B2_BWSCON (DW16)
++#define B3_BWSCON (DW16 + WAIT + UBLB)
++#define B4_BWSCON (DW16)
++#define B5_BWSCON (DW16)
++#define B6_BWSCON (DW32)
++#define B7_BWSCON (DW32)
++
++/* BANK0CON */
++#define B0_Tacs 0x0 /* 0clk */
++#define B0_Tcos 0x0 /* 0clk */
++#define B0_Tacc 0x7 /* 14clk */
++#define B0_Tcoh 0x0 /* 0clk */
++#define B0_Tah 0x0 /* 0clk */
++#define B0_Tacp 0x0
++#define B0_PMC 0x0 /* normal */
++
++/* BANK1CON */
++#define B1_Tacs 0x0 /* 0clk */
++#define B1_Tcos 0x0 /* 0clk */
++#define B1_Tacc 0x7 /* 14clk */
++#define B1_Tcoh 0x0 /* 0clk */
++#define B1_Tah 0x0 /* 0clk */
++#define B1_Tacp 0x0
++#define B1_PMC 0x0
++
++#define B2_Tacs 0x0
++#define B2_Tcos 0x0
++#define B2_Tacc 0x7
++#define B2_Tcoh 0x0
++#define B2_Tah 0x0
++#define B2_Tacp 0x0
++#define B2_PMC 0x0
++
++#define B3_Tacs 0x0 /* 0clk */
++#define B3_Tcos 0x3 /* 4clk */
++#define B3_Tacc 0x7 /* 14clk */
++#define B3_Tcoh 0x1 /* 1clk */
++#define B3_Tah 0x0 /* 0clk */
++#define B3_Tacp 0x3 /* 6clk */
++#define B3_PMC 0x0 /* normal */
++
++#define B4_Tacs 0x0 /* 0clk */
++#define B4_Tcos 0x0 /* 0clk */
++#define B4_Tacc 0x7 /* 14clk */
++#define B4_Tcoh 0x0 /* 0clk */
++#define B4_Tah 0x0 /* 0clk */
++#define B4_Tacp 0x0
++#define B4_PMC 0x0 /* normal */
++
++#define B5_Tacs 0x0 /* 0clk */
++#define B5_Tcos 0x0 /* 0clk */
++#define B5_Tacc 0x7 /* 14clk */
++#define B5_Tcoh 0x0 /* 0clk */
++#define B5_Tah 0x0 /* 0clk */
++#define B5_Tacp 0x0
++#define B5_PMC 0x0 /* normal */
++
++#define B6_MT 0x3 /* SDRAM */
++#define B6_Trcd 0x1
++#define B6_SCAN 0x1 /* 9bit */
++
++#define B7_MT 0x3 /* SDRAM */
++#define B7_Trcd 0x1 /* 3clk */
++#define B7_SCAN 0x1 /* 9bit */
++
++/* REFRESH parameter */
++#define REFEN 0x1 /* Refresh enable */
++#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
++#define Trp 0x1 /* 3clk */
++#define Trc 0x3 /* 7clk */
++#define Tchr 0x2 /* 3clk */
++//#define REFCNT 1113 /* period=15.6us, HCLK=60Mhz, (2048+1-15.6*60) */
++#define REFCNT 997 /* period=17.5us, HCLK=60Mhz, (2048+1-15.6*60) */
++/**************************************/
++
++_TEXT_BASE:
++ .word TEXT_BASE
++
++.globl lowlevel_init
++lowlevel_init:
++ /* memory control configuration */
++ /* make r0 relative the current location so that it */
++ /* reads SMRDATA out of FLASH rather than memory ! */
++ ldr r0, =SMRDATA
++ ldr r1, _TEXT_BASE
++ sub r0, r0, r1
++ ldr r1, =BWSCON /* Bus Width Status Controller */
++ add r2, r0, #13*4
++0:
++ ldr r3, [r0], #4
++ str r3, [r1], #4
++ cmp r2, r0
++ bne 0b
++
++ /* setup asynchronous bus mode */
++ mrc p15, 0, r1 ,c1 ,c0, 0
++ orr r1, r1, #0xc0000000
++ mcr p15, 0, r1, c1, c0, 0
++
++ /* everything is fine now */
++ mov pc, lr
++
++ .ltorg
++/* the literal pools origin */
++
++SMRDATA:
++ .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
++ .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
++ .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
++ .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
++ .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
++ .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
++ .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
++ .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
++ .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
++ .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
++ .word 0xb2
++ .word 0x30
++ .word 0x30
+diff --exclude .git -Nru u-boot/board/gta01/u-boot.lds u-boot.new/board/gta01/u-boot.lds
+--- u-boot/board/gta01/u-boot.lds 1970-01-01 01:00:00.000000000 +0100
++++ u-boot.new/board/gta01/u-boot.lds 2006-10-25 17:28:02.000000000 +0200
+@@ -0,0 +1,57 @@
++/*
++ * (C) Copyright 2002
++ * Gary Jennejohn, DENX Software Engineering, <gj at denx.de>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
++/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/
++OUTPUT_ARCH(arm)
++ENTRY(_start)
++SECTIONS
++{
++ . = 0x00000000;
++
++ . = ALIGN(4);
++ .text :
++ {
++ cpu/arm920t/start.o (.text)
++ *(.text)
++ }
++
++ . = ALIGN(4);
++ .rodata : { *(.rodata) }
++
++ . = ALIGN(4);
++ .data : { *(.data) }
++
++ . = ALIGN(4);
++ .got : { *(.got) }
++
++ . = .;
++ __u_boot_cmd_start = .;
++ .u_boot_cmd : { *(.u_boot_cmd) }
++ __u_boot_cmd_end = .;
++
++ . = ALIGN(4);
++ __bss_start = .;
++ .bss : { *(.bss) }
++ _end = .;
++}
+diff --exclude .git -Nru u-boot/board/qt2410/qt2410.c.old u-boot.new/board/qt2410/qt2410.c.old
+--- u-boot/board/qt2410/qt2410.c.old 1970-01-01 01:00:00.000000000 +0100
++++ u-boot.new/board/qt2410/qt2410.c.old 2006-10-10 11:09:43.000000000 +0200
+@@ -0,0 +1,127 @@
++/*
++ * (C) 2006 by Harald Welte <hwelte at hmw-consulting.de>
++ *
++ * based on existing S3C2410 startup code in u-boot:
++ *
++ * (C) Copyright 2002
++ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
++ * Marius Groeger <mgroeger at sysgo.de>
++ *
++ * (C) Copyright 2002
++ * David Mueller, ELSOFT AG, <d.mueller at elsoft.ch>
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#include <common.h>
++#include <s3c2410.h>
++
++DECLARE_GLOBAL_DATA_PTR;
++
++#if 1
++#define M_MDIV 0xA1 /* Fout = 202.8MHz */
++#define M_PDIV 0x3
++#define M_SDIV 0x1
++//#define M_MDIV 0x90 /* Fout = 202.8MHz */
++//#define M_PDIV 0x7
++//#define M_SDIV 0x0
++#else
++#define M_MDIV 0x5c /* Fout = 150.0MHz */
++#define M_PDIV 0x4
++#define M_SDIV 0x0
++#endif
++
++#if 1
++#define U_M_MDIV 0x78
++#define U_M_PDIV 0x2
++#define U_M_SDIV 0x3
++#else
++#define U_M_MDIV 0x48
++#define U_M_PDIV 0x3
++#define U_M_SDIV 0x2
++#endif
++
++static inline void delay (unsigned long loops)
++{
++ __asm__ volatile ("1:\n"
++ "subs %0, %1, #1\n"
++ "bne 1b":"=r" (loops):"0" (loops));
++}
++
++/*
++ * Miscellaneous platform dependent initialisations
++ */
++
++int board_init (void)
++{
++ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
++ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
++
++ /* to reduce PLL lock time, adjust the LOCKTIME register */
++ clk_power->LOCKTIME = 0xFFFFFF;
++
++ /* configure MPLL */
++ clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
++
++ /* some delay between MPLL and UPLL */
++ delay (4000);
++
++ /* configure UPLL */
++ clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
++
++ /* some delay between MPLL and UPLL */
++ delay (8000);
++
++ /* set up the I/O ports */
++ gpio->GPACON = 0x007FFFFF;
++ gpio->GPBCON = 0x00044555;
++ gpio->GPBUP = 0x000007FF;
++ gpio->GPCCON = 0xAAAAAAAA;
++ gpio->GPCUP = 0x0000FFFF;
++ gpio->GPDCON = 0xAAAAAAAA;
++ gpio->GPDUP = 0x0000FFFF;
++ gpio->GPECON = 0xAAAAAAAA;
++ gpio->GPEUP = 0x0000FFFF;
++ gpio->GPFCON = 0x000055AA;
++ gpio->GPFUP = 0x000000FF;
++ gpio->GPGCON = 0xFF95FFBA;
++ //gpio->GPGUP = 0x0000FFFF;
++ gpio->GPGUP = 0x0000AFEF;
++ gpio->GPHCON = 0x0028FAAA;
++ gpio->GPHUP = 0x000007FF;
++
++ /* arch number of SMDK2410-Board */
++ gd->bd->bi_arch_number = MACH_TYPE_QT2410;
++
++ /* adress of boot parameters */
++ gd->bd->bi_boot_params = 0x30000100;
++
++ icache_enable();
++ dcache_enable();
++
++ return 0;
++}
++
++int dram_init (void)
++{
++ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
++ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
++
++ return 0;
++}
+diff --exclude .git -Nru u-boot/fs/cramfs/cramfs.c u-boot.new/fs/cramfs/cramfs.c
+--- u-boot/fs/cramfs/cramfs.c 2006-07-14 12:41:02.000000000 +0200
++++ u-boot.new/fs/cramfs/cramfs.c 2006-10-26 14:01:41.000000000 +0200
+@@ -27,7 +27,7 @@
+ #include <common.h>
+ #include <malloc.h>
+
+-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
++#if (CONFIG_COMMANDS & CFG_CMD_CRAMFS)
+
+ #include <asm/byteorder.h>
+ #include <linux/stat.h>
+@@ -343,5 +343,22 @@
+ }
+ return 1;
+ }
+-
++#else
++int cramfs_load (char *loadoffset, struct part_info *info, char *filename)
++{
++ return -1;
++}
++int cramfs_ls (struct part_info *info, char *filename)
++{
++ return 0;
++}
++int cramfs_info (struct part_info *info)
++{
++ return 0;
++}
++int cramfs_check (struct part_info *info)
++{
++ return 0;
++}
+ #endif /* CFG_FS_CRAMFS */
++
+diff --exclude .git -Nru u-boot/include/asm-arm/mach-types.h u-boot.new/include/asm-arm/mach-types.h
+--- u-boot/include/asm-arm/mach-types.h 2006-08-11 23:19:07.000000000 +0200
++++ u-boot.new/include/asm-arm/mach-types.h 2006-10-25 23:55:00.000000000 +0200
+@@ -1038,6 +1038,7 @@
+ #define MACH_TYPE_IXP465 1028
+ #define MACH_TYPE_BALLOON3 1029
+ #define MACH_TYPE_QT2410 1108
++#define MACH_TYPE_GTA01 1182
+
+ #ifdef CONFIG_ARCH_EBSA110
+ # ifdef machine_arch_type
+@@ -13327,6 +13328,19 @@
+ # define machine_is_qt2410() (0)
+ #endif
+
++#ifdef CONFIG_MACH_GTA01
++# ifdef machine_arch_type
++# undef machine_arch_type
++# define machine_arch_type __machine_arch_type
++# else
++# define machine_arch_type MACH_TYPE_GTA01
++# endif
++# define machine_is_gta01() (machine_arch_type == MACH_TYPE_GTA01)
++#else
++# define machine_is_gta01() (0)
++#endif
++
++
+ /*
+ * These have not yet been registered
+ */
+diff --exclude .git -Nru u-boot/include/configs/gta01.h u-boot.new/include/configs/gta01.h
+--- u-boot/include/configs/gta01.h 1970-01-01 01:00:00.000000000 +0100
++++ u-boot.new/include/configs/gta01.h 2006-10-26 20:21:30.000000000 +0200
+@@ -0,0 +1,233 @@
++/*
++ * (C) Copyright 2006 Harald Welte <hwelte at hmw-consulting.de>
++ *
++ * Configuation settings for the FIC GTA01 Linux GSM phone
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++#ifndef __CONFIG_H
++#define __CONFIG_H
++
++/* we want to start u-boot directly from within NAND flash */
++#define CONFIG_S3C2410_NAND_BOOT 1
++
++/*
++ * High Level Configuration Options
++ * (easy to change)
++ */
++#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
++#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */
++#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */
++
++/* input clock of PLL */
++#define CONFIG_SYS_CLK_FREQ 12000000/* the GTA01 has 12MHz input clock */
++
++
++#define USE_920T_MMU 1
++#define CONFIG_USE_IRQ 1
++
++/*
++ * Size of malloc() pool
++ */
++#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
++#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
++
++/*
++ * Hardware drivers
++ */
++
++/*
++ * select serial console configuration
++ */
++#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on GTA01 */
++//#define CONFIG_HWFLOW 1
++
++/************************************************************
++ * RTC
++ ************************************************************/
++#define CONFIG_RTC_S3C24X0 1
++
++/* allow to overwrite serial and ethaddr */
++#define CONFIG_ENV_OVERWRITE
++
++#define CONFIG_BAUDRATE 115200
++
++/***********************************************************
++ * Command definition
++ ***********************************************************/
++#define CONFIG_COMMANDS (\
++ CFG_CMD_BDI | \
++ CFG_CMD_LOADS | \
++ CFG_CMD_LAODB | \
++ CFG_CMD_IMI | \
++ CFG_CMD_CACHE | \
++ CFG_CMD_MEMORY | \
++ CFG_CMD_ENV | \
++ /* CFG_CMD_IRQ | */ \
++ CFG_CMD_BOOTD | \
++ CFG_CMD_CONSOLE | \
++ CFG_CMD_ASKENV | \
++ CFG_CMD_RUN | \
++ CFG_CMD_ECHO | \
++ CFG_CMD_I2C | \
++ CFG_CMD_REGINFO | \
++ CFG_CMD_IMMAP | \
++ CFG_CMD_DATE | \
++ CFG_CMD_AUTOSCRIPT | \
++ CFG_CMD_BSP | \
++ CFG_CMD_ELF | \
++ CFG_CMD_MISC | \
++ CFG_CMD_USB | \
++ CFG_CMD_JFFS2 | \
++ CFG_CMD_DIAG | \
++ /* CFG_CMD_HWFLOW | */ \
++ CFG_CMD_SAVES | \
++ CFG_CMD_NAND | \
++ CFG_CMD_PORTIO | \
++ CFG_CMD_MMC | \
++ CFG_CMD_FAT | \
++ CFG_CMD_EXT2 | \
++ 0)
++/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
++#include <cmd_confdefs.h>
++
++#define CONFIG_BOOTDELAY 3
++#define CONFIG_BOOTARGS "rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200 console=tty0 loglevel=8"
++/*#define CONFIG_BOOTFILE "elinos-lart" */
++#define CONFIG_BOOTCOMMAND "nand load 0x32000000 0x34000 0x200000; bootm 0x32000000"
++
++#define CONFIG_DOS_PARTITION 1
++
++#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
++#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
++/* what's this ? it's not used anywhere */
++#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
++#endif
++
++/*
++ * Miscellaneous configurable options
++ */
++#define CFG_LONGHELP /* undef to save memory */
++#define CFG_PROMPT "GTA01 # " /* Monitor Command Prompt */
++#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
++#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
++#define CFG_MAXARGS 16 /* max number of command args */
++#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
++
++#define CFG_MEMTEST_START 0x30000000 /* memtest works on */
++#define CFG_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
++
++#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
++
++#define CFG_LOAD_ADDR 0x33000000 /* default load address */
++
++/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
++/* it to wrap 100 times (total 1562500) to get 1 sec. */
++#define CFG_HZ 1562500
++
++/* valid baudrates */
++#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
++
++/*-----------------------------------------------------------------------
++ * Stack sizes
++ *
++ * The stack sizes are set up in start.S using the settings below
++ */
++#define CONFIG_STACKSIZE (128*1024) /* regular stack */
++#ifdef CONFIG_USE_IRQ
++#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
++#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
++#endif
++
++#define CONFIG_USB_OHCI 1
++
++/*-----------------------------------------------------------------------
++ * Physical Memory Map
++ */
++#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
++#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
++#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
++#define PHYS_SDRAM_RES_SIZE 0x00200000 /* 2 MB for frame buffer */
++
++/*-----------------------------------------------------------------------
++ * FLASH and environment organization
++ */
++
++#if 1
++#define CFG_NO_FLASH 1
++#else
++#define CFG_MAX_FLASH_SECT 1
++#define CFG_MAX_FLASH_BANKS 1
++#endif
++
++#define CFG_ENV_IS_IN_NAND 1
++#define CFG_ENV_SIZE 0x4000 /* 16k Total Size of Environment Sector */
++#define CFG_ENV_OFFSET 0x30000 /* environment after bootloader */
++
++#define NAND_MAX_CHIPS 1
++#define CFG_NAND_BASE 0x4e000000
++#define CFG_MAX_NAND_DEVICE 1
++
++#define CONFIG_MMC 1
++#define CFG_MMC_BASE 0xff000000
++
++/* EXT2 driver */
++#define CONFIG_EXT2 1
++
++/* FAT driver in u-boot is broken currently */
++#define CONFIG_FAT 1
++#define CONFIG_SUPPORT_VFAT 1
++
++/* JFFS2 driver */
++#define CONFIG_JFFS2_NAND 1
++#define CONFIG_JFFS2_NAND_DEV 0
++#define CONFIG_JFFS2_NAND_OFF 0x634000
++#define CONFIG_JFFS2_NAND_SIZE 0x39cc000
++
++/* ATAG configuration */
++#define CONFIG_INITRD_TAG 1
++#define CONFIG_SETUP_MEMORY_TAGS 1
++#define CONFIG_CMDLINE_TAG 1
++#if 0
++#define CONFIG_SERIAL_TAG 1
++#define CONFIG_REVISION_TAG 1
++#endif
++
++#define CONFIG_DRIVER_S3C24X0_I2C 1
++#define CONFIG_HARD_I2C 1
++#define CFG_I2C_SPEED 400000 /* 400kHz according to PCF50707 data sheet */
++#define CFG_I2C_SLAVE 0x7f
++
++
++#if 0
++#define CONFIG_VIDEO
++#define CONFIG_VIDEO_S3C2410
++#define CONFIG_CFB_CONSOLE
++#define CONFIG_VIDEO_LOGO
++#define CONFIG_VGA_AS_SINGLE_DEVICE
++
++#define VIDEO_KBD_INIT_FCT 0
++#define VIDEO_TSTC_FCT serial_tstc
++#define VIDEO_GETC_FCT serial_getc
++
++#define LCD_VIDEO_ADDR 0x33d00000
++#endif
++
++#endif /* __CONFIG_H */
Added: trunk/oe/packages/uboot/uboot-gta01_0.0+cvs20060907.bb
===================================================================
--- trunk/oe/packages/uboot/uboot-gta01_0.0+cvs20060907.bb 2006-10-29 20:58:07 UTC (rev 147)
+++ trunk/oe/packages/uboot/uboot-gta01_0.0+cvs20060907.bb 2006-10-30 10:47:19 UTC (rev 148)
@@ -0,0 +1,41 @@
+DESCRIPTION = "U-boot bootloader w/ gta01 support"
+SECTION = "bootloader"
+PRIORITY = "optional"
+LICENSE = "GPL"
+SRCDATE := "${PV}"
+PR = "r0"
+
+PROVIDES = "virtual/bootloader"
+S = "${WORKDIR}/u-boot"
+
+SRC_URI = "file://u-boot-20060907.tar.bz2 \
+ file://u-boot-20060907-gta01.patch;patch=1 \
+ file://gta01_*.h"
+
+EXTRA_OEMAKE = "CROSS_COMPILE=${TARGET_PREFIX}"
+TARGET_LDFLAGS = ""
+UBOOT_MACHINE = "gta01_config"
+
+inherit base
+
+do_compile () {
+ for type in nand
+ do
+ install -m 0644 ${WORKDIR}/gta01_${type}.h include/configs/gta01.h
+ oe_runmake ${UBOOT_MACHINE}
+ oe_runmake all
+ mv u-boot.bin u-boot_$type.bin
+ done
+}
+
+do_deploy () {
+ install -d ${DEPLOY_DIR_IMAGE}
+ for type in nand
+ do
+ install ${S}/u-boot_$type.bin ${DEPLOY_DIR_IMAGE}/u-boot_$type-${MACHINE}-${DATETIME}.bin
+ done
+ install -m 0755 tools/mkimage ${STAGING_BINDIR}/uboot-mkimage
+}
+
+do_deploy[dirs] = "${S}"
+addtask deploy before do_build after do_compile
More information about the commitlog
mailing list
