r3614 - trunk/src/host/qemu-neo1973/openmoko
andrew at sita.openmoko.org
andrew at sita.openmoko.org
Fri Dec 7 17:30:57 CET 2007
Author: andrew
Date: 2007-12-07 17:30:55 +0100 (Fri, 07 Dec 2007)
New Revision: 3614
Added:
trunk/src/host/qemu-neo1973/openmoko/README
trunk/src/host/qemu-neo1973/openmoko/linux-gta02-pseudo.patch
Log:
Provide a kernel for the pseudo GTA02 board and a README.
Added: trunk/src/host/qemu-neo1973/openmoko/README
===================================================================
--- trunk/src/host/qemu-neo1973/openmoko/README 2007-12-07 16:30:44 UTC (rev 3613)
+++ trunk/src/host/qemu-neo1973/openmoko/README 2007-12-07 16:30:55 UTC (rev 3614)
@@ -0,0 +1,42 @@
+This directory contains files used for OpenMoko which are not qemu
+code but are in some way related or useful to have at hand.
+
+The kernel patch with GTA02fake support is based on:
+ * kernel 2.6.22.5
+ * OpenMoko patchset revision 3610 from
+ http://svn.openmoko.org/trunk/src/target/kernel/patches/
+ * Samuel's Atheros WLAN driver revision 3610 from
+ http://svn.openmoko.org/developers/sameo/patches/ar6k-atheros/
+
+The following sequence can be used to obtain a working tree on which the
+patch can be applied:
+
+tar -xvjf linux-2.6.22.5.tar.bz2
+cd linux-2.6.22.5
+cg-init
+git-add -r .
+cg-commit -C -m "Linux 2.6.22.5"
+svn co -r 3610 http://svn.openmoko.org/trunk/src/target/kernel/patches/
+quilt -a push
+cg-add -r * patches/*
+cg-rm include/sound/wavefront_fx.h
+cg-commit -m "Linux-OpenMoko"
+svn co -r 3610 http://svn.openmoko.org/developers/sameo/patches/ar6k-atheros/
+mv ar6k-atheros patches/
+wget -O patches/fix-EVIOCGRAB-semantics-2.6.22.5.patch http://www.openembedded.org/viewmtn/revision/downloadfile/105955293719b2a1414f1b03af410b8ff8dbdb1b/packages/linux/linux-openmoko/fix-EVIOCGRAB-semantics-2.6.22.5.patch
+wget -O patches/fix-gta01-flowcontrol2-2.6.22.5.patch http://www.openembedded.org/viewmtn/revision/downloadfile/105955293719b2a1414f1b03af410b8ff8dbdb1b/packages/linux/linux-openmoko/fix-gta01-flowcontrol2-2.6.22.5.patch
+cat >> patches/series
+fix-EVIOCGRAB-semantics-2.6.22.5.patch -p1
+fix-gta01-flowcontrol2-2.6.22.5.patch -p1
+ar6k-atheros/common_atheros_sdiostack.patch
+ar6k-atheros/common_atheros_sdiostack_functions.patch
+ar6k-atheros/common_atheros_sdiostack_shcd.patch
+ar6k-atheros/common_atheros_sdiostack_ar6000_wlan.patch
+ar6k-atheros/pnp_fixes_2.6.22.5.patch
+ar6k-atheros/mach-gta02_wifi.patch
+ar6k-atheros/s3c24xx_hcd_atheros.patch
+^D
+quilt -a push
+cg-add -r * patches/* patches/ar6k-atheros/*
+cg-commit -m "Linux-sameo-WLAN"
+cg-patch < ../linux-gta02-pseudo.patch
Added: trunk/src/host/qemu-neo1973/openmoko/linux-gta02-pseudo.patch
===================================================================
--- trunk/src/host/qemu-neo1973/openmoko/linux-gta02-pseudo.patch 2007-12-07 16:30:44 UTC (rev 3613)
+++ trunk/src/host/qemu-neo1973/openmoko/linux-gta02-pseudo.patch 2007-12-07 16:30:55 UTC (rev 3614)
@@ -0,0 +1,1036 @@
+diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
+index dc833c0..2347376 100644
+--- a/arch/arm/mach-s3c2410/Kconfig
++++ b/arch/arm/mach-s3c2410/Kconfig
+@@ -123,5 +123,13 @@ config MACH_NEO1973_GTA01
+ help
+ Say Y here if you are using the FIC Neo1973 GSM Phone
+
++config MACH_NEO1973_GTA02F
++ bool "QEMU Neo1973 GSM Phone (Paravirtual GTA02 Hardware)"
++ select CPU_S3C2410
++ select SENSORS_PCF50606
++ help
++ Say Y here if you are using the QEMU Neo1973 GTA02-like
++ GSM phone by running qemu with "-M gta02fake" commandline.
++
+ endmenu
+
+diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
+index bb577f4..5208bb0 100644
+--- a/arch/arm/mach-s3c2410/Makefile
++++ b/arch/arm/mach-s3c2410/Makefile
+@@ -31,3 +31,4 @@ obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o
+ obj-$(CONFIG_MACH_VR1000) += mach-vr1000.o usb-simtec.o
+ obj-$(CONFIG_MACH_QT2410) += mach-qt2410.o
+ obj-$(CONFIG_MACH_NEO1973_GTA01)+= mach-gta01.o
++obj-$(CONFIG_MACH_NEO1973_GTA02F)+= mach-gta02f.o
+diff --git a/arch/arm/mach-s3c2410/mach-gta01.c b/arch/arm/mach-s3c2410/mach-gta01.c
+index 94e35a7..b929229 100644
+--- a/arch/arm/mach-s3c2410/mach-gta01.c
++++ b/arch/arm/mach-s3c2410/mach-gta01.c
+@@ -263,7 +263,7 @@ static struct resource gta01_pmu_resources[] = {
+ },
+ };
+
+-struct platform_device gta01_pmu_dev = {
++static struct platform_device gta01_pmu_dev = {
+ .name = "pcf50606",
+ .num_resources = ARRAY_SIZE(gta01_pmu_resources),
+ .resource = gta01_pmu_resources,
+@@ -356,6 +356,7 @@ static struct s3c2410_platform_nand gta01_nand_info = {
+ .sets = gta01_nand_sets,
+ };
+
++#if 0
+ static unsigned int mmc_millivolts[] = {
+ [MMC_VDD_145_150] = 1500,
+ [MMC_VDD_150_155] = 1500,
+@@ -379,6 +380,7 @@ static unsigned int mmc_millivolts[] = {
+ [MMC_VDD_31_32] = 3200,
+ [MMC_VDD_32_33] = 3300,
+ };
++#endif
+
+ static void gta01_mmc_set_power(unsigned char power_mode, unsigned short vdd)
+ {
+@@ -472,12 +474,10 @@ static void __gta01_udc_vbus_draw(struct work_struct *work)
+ }
+ }
+
+-static int gta01_udc_vbus_draw(unsigned int ma)
++static void gta01_udc_vbus_draw(unsigned int ma)
+ {
+ gta01_udc_vbus_drawer.ma = ma;
+ schedule_work(>a01_udc_vbus_drawer.work);
+-
+- return 0;
+ }
+
+ static struct s3c2410_udc_mach_info gta01_udc_cfg = {
+@@ -552,7 +552,7 @@ static struct resource s3c_spi_lcm_resource[] = {
+ },
+ };
+
+-struct platform_device s3c_device_spi_lcm = {
++static struct platform_device s3c_device_spi_lcm = {
+ .name = "s3c24xx-spi-gpio",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_spi_lcm_resource),
+@@ -576,7 +576,7 @@ static struct resource gta01_bl_resources[] = {
+ },
+ };
+
+-struct platform_device gta01_bl_dev = {
++static struct platform_device gta01_bl_dev = {
+ .name = "gta01-bl",
+ .num_resources = ARRAY_SIZE(gta01_bl_resources),
+ .resource = gta01_bl_resources,
+@@ -592,7 +592,7 @@ static struct resource gta01_led_resources[] = {
+ },
+ };
+
+-struct platform_device gta01_led_dev = {
++static struct platform_device gta01_led_dev = {
+ .name = "gta01-led",
+ .num_resources = ARRAY_SIZE(gta01_led_resources),
+ .resource = gta01_led_resources,
+@@ -613,7 +613,7 @@ static struct resource gta01_button_resources[] = {
+ },
+ };
+
+-struct platform_device gta01_button_dev = {
++static struct platform_device gta01_button_dev = {
+ .name ="gta01-button",
+ .num_resources = ARRAY_SIZE(gta01_button_resources),
+ .resource = gta01_button_resources,
+@@ -707,8 +707,7 @@ static void __init gta01_machine_init(void)
+ s3c2410_pm_init();
+
+ set_irq_type(GTA01_IRQ_MODEM, IRQT_RISING);
+- request_irq(GTA01_IRQ_MODEM, gta01_modem_irq,
+- SA_INTERRUPT, "modem", NULL);
++ request_irq(GTA01_IRQ_MODEM, gta01_modem_irq, 0, "modem", NULL);
+ enable_irq_wake(GTA01_IRQ_MODEM);
+ }
+
+diff --git a/arch/arm/mach-s3c2410/mach-gta02f.c b/arch/arm/mach-s3c2410/mach-gta02f.c
+new file mode 100644
+index 0000000..e9c7bfe
+--- /dev/null
++++ b/arch/arm/mach-s3c2410/mach-gta02f.c
+@@ -0,0 +1,785 @@
++/*
++ * linux/arch/arm/mach-s3c2410/mach-gta02f.c
++ *
++ * S3C2410 Machine Support for the paravirtual GTA02 in qemu-neo1973.
++ * All its specs are that of GTA01 except the following peripherals:
++ * o the GPS chip on UART1
++ * o the WLAN chip on SDIO
++ * o the accelerometers
++ * o no SD slot
++ *
++ * Copyright (C) 2007 OpenMoko, Inc.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/interrupt.h>
++#include <linux/list.h>
++#include <linux/timer.h>
++#include <linux/init.h>
++#include <linux/workqueue.h>
++#include <linux/platform_device.h>
++#include <linux/serial_core.h>
++#include <linux/spi/spi.h>
++#include <linux/spi/spi_bitbang.h>
++#include <linux/mmc/mmc.h>
++#include <linux/mmc/host.h>
++
++#include <linux/mtd/mtd.h>
++#include <linux/mtd/nand.h>
++#include <linux/mtd/nand_ecc.h>
++#include <linux/mtd/partitions.h>
++
++#include <linux/pcf50606.h>
++
++#include <asm/mach/arch.h>
++#include <asm/mach/map.h>
++#include <asm/mach/irq.h>
++
++#include <asm/hardware.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/mach-types.h>
++
++#include <asm/arch/regs-serial.h>
++#include <asm/arch/regs-gpio.h>
++#include <asm/arch/fb.h>
++#include <asm/arch/udc.h>
++#include <asm/arch/nand.h>
++#include <asm/arch/mci.h>
++#include <asm/arch/ts.h>
++#include <asm/arch/spi.h>
++#include <asm/arch/spi-gpio.h>
++#include <asm/arch/usb-control.h>
++
++#include <asm/arch/gta01.h>
++#include <asm/arch/gta02.h>
++
++#include <asm/plat-s3c24xx/devs.h>
++#include <asm/plat-s3c24xx/cpu.h>
++#include <asm/plat-s3c24xx/pm.h>
++
++static struct map_desc gta01_iodesc[] __initdata = {
++ {
++ .virtual = 0xe0000000,
++ .pfn = __phys_to_pfn(S3C2410_CS3+0x01000000),
++ .length = SZ_1M,
++ .type = MT_DEVICE
++ },
++};
++
++#define UCON S3C2410_UCON_DEFAULT
++#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
++#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
++
++static struct s3c2410_uartcfg gta01_uartcfgs[] = {
++ [0] = {
++ .hwport = 0,
++ .flags = 0,
++ .ucon = UCON,
++ .ulcon = ULCON,
++ .ufcon = UFCON,
++ },
++ [1] = {
++ .hwport = 1,
++ .flags = 0,
++ .ucon = UCON,
++ .ulcon = ULCON,
++ .ufcon = UFCON,
++ },
++ [2] = {
++ .hwport = 2,
++ .flags = 0,
++ .ucon = UCON,
++ .ulcon = ULCON,
++ .ufcon = UFCON,
++ },
++};
++
++/* PMU driver info */
++
++static int pmu_callback(struct device *dev, unsigned int feature,
++ enum pmu_event event)
++{
++ switch (feature) {
++ case PCF50606_FEAT_ACD:
++ switch (event) {
++ case PMU_EVT_INSERT:
++ pcf50606_charge_fast(pcf50606_global, 1);
++ break;
++ case PMU_EVT_REMOVE:
++ pcf50606_charge_fast(pcf50606_global, 0);
++ break;
++ default:
++ break;
++ }
++ break;
++ default:
++ break;
++ }
++
++ return 0;
++}
++
++static struct pcf50606_platform_data gta01_pcf_pdata = {
++ .used_features = PCF50606_FEAT_EXTON |
++ PCF50606_FEAT_MBC |
++ PCF50606_FEAT_BBC |
++ PCF50606_FEAT_RTC |
++ PCF50606_FEAT_WDT |
++ PCF50606_FEAT_CHGCUR |
++ PCF50606_FEAT_BATVOLT |
++ PCF50606_FEAT_BATTEMP,
++ .onkey_seconds_required = 3,
++ .cb = &pmu_callback,
++ .r_fix_batt = 10000,
++ .r_fix_batt_par = 10000,
++ .r_sense_milli = 220,
++ .rails = {
++ [PCF50606_REGULATOR_D1REG] = {
++ .name = "bt_3v15",
++ .voltage = {
++ .init = 3150,
++ .max = 3150,
++ },
++ },
++ [PCF50606_REGULATOR_D2REG] = {
++ .name = "gl_2v5",
++ .voltage = {
++ .init = 2500,
++ .max = 2500,
++ },
++ },
++ [PCF50606_REGULATOR_D3REG] = {
++ .name = "stby_1v8",
++ .flags = PMU_VRAIL_F_SUSPEND_ON,
++ .voltage = {
++ .init = 1800,
++ .max = 2100,
++ },
++ },
++ [PCF50606_REGULATOR_DCD] = {
++ .name = "gl_1v5",
++ .voltage = {
++ .init = 1500,
++ .max = 1500,
++ },
++ },
++ [PCF50606_REGULATOR_DCDE] = {
++ .name = "io_3v3",
++ .flags = PMU_VRAIL_F_SUSPEND_ON,
++ .voltage = {
++ .init = 3300,
++ .max = 3330,
++ },
++ },
++ [PCF50606_REGULATOR_DCUD] = {
++ .name = "core_1v8",
++ .flags = PMU_VRAIL_F_SUSPEND_ON,
++ .voltage = {
++ .init = 2100,
++ .max = 2100,
++ },
++ },
++ [PCF50606_REGULATOR_IOREG] = {
++ .name = "codec_3v3",
++ .voltage = {
++ .init = 3300,
++ .max = 3300,
++ },
++ },
++ [PCF50606_REGULATOR_LPREG] = {
++ .name = "lcm_3v3",
++ .voltage = {
++ .init = 3300,
++ .max = 3300,
++ },
++ }
++ },
++};
++
++static void cfg_pmu_vrail(struct pmu_voltage_rail *vrail, char *name,
++ unsigned int flags, unsigned int init,
++ unsigned int max)
++{
++ vrail->name = name;
++ vrail->flags = flags;
++ vrail->voltage.init = init;
++ vrail->voltage.max = max;
++}
++
++static void mangle_pmu_pdata_by_system_rev(void)
++{
++ switch (system_rev) {
++ case GTA01Bv4_SYSTEM_REV:
++ gta01_pcf_pdata.used_features |= PCF50606_FEAT_ACD;
++ break;
++ case GTA01Bv3_SYSTEM_REV:
++ case GTA01Bv2_SYSTEM_REV:
++ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG]
++ .name = "user1";
++ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG]
++ .flags &= ~PMU_VRAIL_F_SUSPEND_ON;
++ gta01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG]
++ .flags = PMU_VRAIL_F_UNUSED;
++ break;
++ case GTA01v4_SYSTEM_REV:
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCUD],
++ "core_1v8", PMU_VRAIL_F_SUSPEND_ON, 1800, 1800);
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D1REG],
++ "vrf_3v", 0, 3000, 3000);
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG],
++ "vtcxo_2v8", 0, 2800, 2800);
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCD],
++ "gl_3v5", 0, 3500, 3500);
++ break;
++ case GTA01v3_SYSTEM_REV:
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D1REG],
++ "vrf_3v", 0, 3000, 3000);
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D2REG],
++ "sd_3v3", 0, 3300, 3300);
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_D3REG],
++ "codec_3v3", 0, 3300, 3300);
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCD],
++ "gpsio_3v3", 0, 3300, 3300);
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_DCUD],
++ "core_1v8", PMU_VRAIL_F_SUSPEND_ON, 1800, 1800);
++ cfg_pmu_vrail(>a01_pcf_pdata.rails[PCF50606_REGULATOR_IOREG],
++ "vtcxo_2v8", 0, 2800, 2800);
++ break;
++ }
++}
++
++static struct resource gta01_pmu_resources[] = {
++ [0] = {
++ .flags = IORESOURCE_IRQ,
++ .start = GTA01_IRQ_PCF50606,
++ .end = GTA01_IRQ_PCF50606,
++ },
++};
++
++static struct platform_device gta01_pmu_dev = {
++ .name = "pcf50606",
++ .num_resources = ARRAY_SIZE(gta01_pmu_resources),
++ .resource = gta01_pmu_resources,
++ .dev = {
++ .platform_data = >a01_pcf_pdata,
++ },
++};
++
++/* LCD driver info */
++
++/* Configuration for 480x640 toppoly TD028TTEC1 */
++static struct s3c2410fb_mach_info gta01_lcd_cfg __initdata = {
++ .regs = {
++ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
++ S3C2410_LCDCON1_TFT |
++ S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
++
++ .lcdcon2 = S3C2410_LCDCON2_VBPD(1) | /* 2 */
++ S3C2410_LCDCON2_LINEVAL(639) |/* 640 */
++ S3C2410_LCDCON2_VFPD(15) | /* 16 */
++ S3C2410_LCDCON2_VSPW(1), /* 2 */
++
++ .lcdcon3 = S3C2410_LCDCON3_HBPD(7) | /* 8 */
++ S3C2410_LCDCON3_HOZVAL(479) | /* 480 */
++ S3C2410_LCDCON3_HFPD(103), /* 104 */
++
++ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
++ S3C2410_LCDCON4_HSPW(7), /* 8 */
++
++ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
++ S3C2410_LCDCON5_INVVCLK |
++ S3C2410_LCDCON5_INVVLINE |
++ S3C2410_LCDCON5_INVVFRAME |
++ S3C2410_LCDCON5_PWREN |
++ S3C2410_LCDCON5_HWSWP,
++ },
++
++ .lpcsel = ((0xCE6) & ~7) | 1<<4,
++ .type = S3C2410_LCDCON1_TFT,
++
++ .width = 480,
++ .height = 640,
++
++ .xres = {
++ .min = 240,
++ .max = 480,
++ .defval = 480,
++ },
++
++ .yres = {
++ .min = 320,
++ .max = 640,
++ .defval = 640,
++ },
++
++ .bpp = {
++ .min = 1,
++ .max = 32,
++ .defval = 16,
++ },
++};
++static struct platform_device *gta01_devices[] __initdata = {
++ &s3c_device_usb,
++ &s3c_device_lcd,
++ &s3c_device_wdt,
++ &s3c_device_i2c,
++ &s3c_device_iis,
++ // &s3c_device_sdi, /* FIXME: temporary disable to avoid s3cmci bind */
++ &s3c_device_usbgadget,
++ &s3c_device_nand,
++ &s3c_device_ts,
++};
++
++static struct s3c2410_nand_set gta01_nand_sets[] = {
++ [0] = {
++ .name = "neo1973-nand",
++ .nr_chips = 1,
++ },
++};
++
++/* choose a set of timings which should suit most 512Mbit
++ * chips and beyond.
++ */
++
++static struct s3c2410_platform_nand gta01_nand_info = {
++ .tacls = 20,
++ .twrph0 = 60,
++ .twrph1 = 20,
++ .nr_sets = ARRAY_SIZE(gta01_nand_sets),
++ .sets = gta01_nand_sets,
++};
++
++#if 0
++static unsigned int mmc_millivolts[] = {
++ [MMC_VDD_145_150] = 1500,
++ [MMC_VDD_150_155] = 1500,
++ [MMC_VDD_155_160] = 1600,
++ [MMC_VDD_160_165] = 1600,
++ [MMC_VDD_165_170] = 1700,
++ [MMC_VDD_17_18] = 1800,
++ [MMC_VDD_18_19] = 1900,
++ [MMC_VDD_19_20] = 2000,
++ [MMC_VDD_20_21] = 2100,
++ [MMC_VDD_21_22] = 2200,
++ [MMC_VDD_22_23] = 2300,
++ [MMC_VDD_23_24] = 2400,
++ [MMC_VDD_24_25] = 2500,
++ [MMC_VDD_25_26] = 2600,
++ [MMC_VDD_26_27] = 2700,
++ [MMC_VDD_27_28] = 2800,
++ [MMC_VDD_28_29] = 2900,
++ [MMC_VDD_29_30] = 3000,
++ [MMC_VDD_30_31] = 3100,
++ [MMC_VDD_31_32] = 3200,
++ [MMC_VDD_32_33] = 3300,
++};
++#endif
++
++static void gta01_mmc_set_power(unsigned char power_mode, unsigned short vdd)
++{
++ printk(KERN_DEBUG "mmc_set_power(power_mode=%u, vdd=%u\n",
++ power_mode, vdd);
++
++ switch (system_rev) {
++ case GTA01v3_SYSTEM_REV:
++ /* FIXME */
++ break;
++ case GTA01v4_SYSTEM_REV:
++ /* FIXME: set GTA01_GPIO_SDMMC_ON on GTA01v4 */
++ //pcf50606_voltage_set(mmc_millivolts[vdd]);
++ break;
++ case GTA01Bv2_SYSTEM_REV:
++ case GTA01Bv3_SYSTEM_REV:
++ /* FIXME */
++ break;
++ case GTA01Bv4_SYSTEM_REV:
++ switch (power_mode) {
++ case MMC_POWER_OFF:
++ s3c2410_gpio_setpin(GTA01_GPIO_SDMMC_ON, 1);
++ break;
++ case MMC_POWER_ON:
++ s3c2410_gpio_setpin(GTA01_GPIO_SDMMC_ON, 0);
++ break;
++ }
++ break;
++ }
++}
++
++static struct s3c24xx_mci_pdata gta01_mmc_cfg = {
++ .gpio_detect = GTA01_GPIO_nSD_DETECT,
++ .set_power = >a01_mmc_set_power,
++ .ocr_avail = MMC_VDD_32_33, /* GTA01Bv2/3/4 */
++#if 0
++ .ocr_avail = MMC_VDD_145_150|MMC_VDD_150_155|MMC_VDD_155_160|
++ MMC_VDD_160_165| MMC_VDD_165_170|MMC_VDD_17_18|
++ MMC_VDD_18_19|MMC_VDD_19_20|MMC_VDD_20_21|
++ MMC_VDD_21_22|MMC_VDD_22_23|MMC_VDD_23_24|
++ MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
++ MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
++ MMC_VDD_30_31|MMC_VDD_31_32|MMC_VDD_32_33,
++#endif
++};
++
++static struct resource gta02_sdio_resources[] = {
++ [0] = {
++ .flags = IORESOURCE_IRQ,
++ .start = IRQ_SDI,
++ .end = IRQ_SDI,
++ },
++ [1] = {
++ .flags = IORESOURCE_MEM,
++ .start = S3C2410_PA_SDI,
++ .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
++ },
++ [2] = {
++ .flags = IORESOURCE_DMA,
++ .start = 0, /* Channel 0 for SDI */
++ .end = 0,
++ },
++};
++
++static struct platform_device gta02_sdio_dev = {
++ .name = "s3c24xx-sdio",
++ .id = -1,
++ .dev = {
++ .coherent_dma_mask = 0xffffffff,
++ },
++ .resource = gta02_sdio_resources,
++ .num_resources = ARRAY_SIZE(gta02_sdio_resources),
++};
++
++static void gta01_udc_command(enum s3c2410_udc_cmd_e cmd)
++{
++ printk(KERN_DEBUG "%s(%d)\n", __func__, cmd);
++
++ switch (cmd) {
++ case S3C2410_UDC_P_ENABLE:
++ s3c2410_gpio_setpin(GTA01_GPIO_USB_PULLUP, 1);
++ break;
++ case S3C2410_UDC_P_DISABLE:
++ s3c2410_gpio_setpin(GTA01_GPIO_USB_PULLUP, 0);
++ break;
++ case S3C2410_UDC_P_RESET:
++ /* FIXME! */
++ break;
++ default:
++ break;
++ }
++}
++
++/* use a work queue, since I2C API inherently schedules
++ * and we get called in hardirq context from UDC driver */
++
++struct vbus_draw {
++ struct work_struct work;
++ int ma;
++};
++static struct vbus_draw gta01_udc_vbus_drawer;
++
++static void __gta01_udc_vbus_draw(struct work_struct *work)
++{
++ /* FIXME: this is a quick fix to work around boot-time
++ * ordering problems if the s3c2410_udc is initialized
++ * before the pcf50606 driver has defined pcf50606_global */
++ if (!pcf50606_global)
++ return;
++
++ if (gta01_udc_vbus_drawer.ma >= 500) {
++ /* enable fast charge */
++ printk(KERN_DEBUG "udc: enabling fast charge\n");
++ pcf50606_charge_fast(pcf50606_global, 1);
++ } else {
++ /* disable fast charge */
++ printk(KERN_DEBUG "udc: disabling fast charge\n");
++ pcf50606_charge_fast(pcf50606_global, 0);
++ }
++}
++
++static void gta01_udc_vbus_draw(unsigned int ma)
++{
++ gta01_udc_vbus_drawer.ma = ma;
++ schedule_work(>a01_udc_vbus_drawer.work);
++}
++
++static struct s3c2410_udc_mach_info gta01_udc_cfg = {
++ .vbus_draw = gta01_udc_vbus_draw,
++};
++
++static struct s3c2410_ts_mach_info gta01_ts_cfg = {
++ .delay = 10000,
++ .presc = 65,
++ .oversampling_shift = 5,
++};
++
++/* SPI */
++
++static struct spi_board_info gta01_spi_board_info[] __initdata = {
++ {
++ .modalias = "jbt6k74",
++ /* platform_data */
++ /* controller_data */
++ /* irq */
++ .max_speed_hz = 10 * 1000 * 1000,
++ .bus_num = 1,
++ /* chip_select */
++ },
++};
++
++
++#ifdef SPI_HARD
++static struct s3c2410_spi_info spi_cfg = {
++ .pin_cs = S3C2410_GPG3,
++ .board_size = ARRAY_SIZE(gta01_spi_board_info),
++ .board_info = gta01_spi_board_info,
++};
++#else
++static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs)
++{
++ switch (cs) {
++ case BITBANG_CS_ACTIVE:
++ s3c2410_gpio_setpin(S3C2410_GPG3, 0);
++ break;
++ case BITBANG_CS_INACTIVE:
++ s3c2410_gpio_setpin(S3C2410_GPG3, 1);
++ break;
++ }
++}
++
++static struct s3c2410_spigpio_info spi_gpio_cfg = {
++ .pin_clk = S3C2410_GPG7,
++ .pin_mosi = S3C2410_GPG6,
++ .pin_miso = S3C2410_GPG5,
++ .board_size = ARRAY_SIZE(gta01_spi_board_info),
++ .board_info = gta01_spi_board_info,
++ .chip_select = &spi_gpio_cs,
++};
++
++static struct resource s3c_spi_lcm_resource[] = {
++ [0] = {
++ .start = S3C2410_GPG3,
++ .end = S3C2410_GPG3,
++ },
++ [1] = {
++ .start = S3C2410_GPG5,
++ .end = S3C2410_GPG5,
++ },
++ [2] = {
++ .start = S3C2410_GPG6,
++ .end = S3C2410_GPG6,
++ },
++ [3] = {
++ .start = S3C2410_GPG7,
++ .end = S3C2410_GPG7,
++ },
++};
++
++static struct platform_device s3c_device_spi_lcm = {
++ .name = "s3c24xx-spi-gpio",
++ .id = 1,
++ .num_resources = ARRAY_SIZE(s3c_spi_lcm_resource),
++ .resource = s3c_spi_lcm_resource,
++ .dev = {
++ .platform_data = &spi_gpio_cfg,
++ },
++};
++#endif
++
++static struct gta01bl_machinfo backlight_machinfo = {
++ .default_intensity = 1,
++ .max_intensity = 1,
++ .limit_mask = 1,
++};
++
++static struct resource gta01_bl_resources[] = {
++ [0] = {
++ .start = GTA01_GPIO_BACKLIGHT,
++ .end = GTA01_GPIO_BACKLIGHT,
++ },
++};
++
++struct platform_device gta01_bl_dev = {
++ .name = "gta01-bl",
++ .num_resources = ARRAY_SIZE(gta01_bl_resources),
++ .resource = gta01_bl_resources,
++ .dev = {
++ .platform_data = &backlight_machinfo,
++ },
++};
++
++static struct resource gta01_led_resources[] = {
++ [0] = {
++ .start = GTA01_GPIO_VIBRATOR_ON,
++ .end = GTA01_GPIO_VIBRATOR_ON,
++ },
++};
++
++struct platform_device gta01_led_dev = {
++ .name = "gta01-led",
++ .num_resources = ARRAY_SIZE(gta01_led_resources),
++ .resource = gta01_led_resources,
++};
++
++static struct resource gta01_button_resources[] = {
++ [0] = {
++ .start = GTA01_GPIO_AUX_KEY,
++ .end = GTA01_GPIO_AUX_KEY,
++ },
++ [1] = {
++ .start = GTA01_GPIO_HOLD_KEY,
++ .end = GTA01_GPIO_HOLD_KEY,
++ },
++ [2] = {
++ .start = GTA01_GPIO_JACK_INSERT,
++ .end = GTA01_GPIO_JACK_INSERT,
++ },
++};
++
++static struct platform_device gta01_button_dev = {
++ .name ="gta01-button",
++ .num_resources = ARRAY_SIZE(gta01_button_resources),
++ .resource = gta01_button_resources,
++};
++
++static struct platform_device gta01_pm_gsm_dev = {
++ .name ="gta01-pm-gsm",
++};
++
++/* USB */
++static struct s3c2410_hcd_info gta01_usb_info = {
++ .port[0] = {
++ .flags = S3C_HCDFLG_USED,
++ },
++ .port[1] = {
++ .flags = 0,
++ },
++};
++
++static void __init gta01_map_io(void)
++{
++ s3c24xx_init_io(gta01_iodesc, ARRAY_SIZE(gta01_iodesc));
++ s3c24xx_init_clocks(12*1000*1000);
++ s3c24xx_init_uarts(gta01_uartcfgs, ARRAY_SIZE(gta01_uartcfgs));
++}
++
++static irqreturn_t gta01_modem_irq(int irq, void *param)
++{
++ printk(KERN_DEBUG "modem wakeup interrupt\n");
++ return IRQ_HANDLED;
++}
++
++static void __init gta02f_machine_init(void)
++{
++ if (system_rev == GTA01v4_SYSTEM_REV ||
++ system_rev == GTA01Bv2_SYSTEM_REV ||
++ system_rev == GTA01Bv3_SYSTEM_REV ||
++ system_rev == GTA01Bv4_SYSTEM_REV)
++ gta01_udc_cfg.udc_command = gta01_udc_command;
++
++ s3c_device_usb.dev.platform_data = >a01_usb_info;
++ s3c_device_nand.dev.platform_data = >a01_nand_info;
++ s3c_device_sdi.dev.platform_data = >a01_mmc_cfg;
++
++ s3c24xx_fb_set_platdata(>a01_lcd_cfg);
++
++ gta01_mmc_cfg.gpio_detect = 0;
++
++ INIT_WORK(>a01_udc_vbus_drawer.work, __gta01_udc_vbus_draw);
++ s3c24xx_udc_set_platdata(>a01_udc_cfg);
++ set_s3c2410ts_info(>a01_ts_cfg);
++
++#if 0
++ /* TODO: choose GPIO outputs that exist on S3C2410 */
++ /* FIXME: hardcoded WLAN module power-up */
++ s3c2410_gpio_cfgpin(GTA02_CHIP_PWD, S3C2410_GPIO_OUTPUT);
++
++ /* Power is down */
++ s3c2410_gpio_setpin(GTA02_CHIP_PWD, 1);
++ mdelay(100);
++
++ s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT);
++ /* Chip is in reset state */
++ s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0);
++ mdelay(100);
++ /* Power is up */
++ s3c2410_gpio_setpin(GTA02_CHIP_PWD, 0);
++ mdelay(100);
++ /* Chip is out of reset */
++ s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1);
++#endif
++
++ /* Set LCD_RESET / XRES to high */
++ s3c2410_gpio_cfgpin(S3C2410_GPC6, S3C2410_GPIO_OUTPUT);
++ s3c2410_gpio_setpin(S3C2410_GPC6, 1);
++
++#ifdef SPI_HARD
++#else
++ /* SPI chip select is gpio output */
++ s3c2410_gpio_cfgpin(S3C2410_GPG3, S3C2410_GPIO_OUTPUT);
++ s3c2410_gpio_setpin(S3C2410_GPG3, 1);
++
++ platform_device_register(&s3c_device_spi_lcm);
++#endif
++ platform_device_register(>a01_bl_dev);
++ platform_device_register(>a01_button_dev);
++ platform_device_register(>a01_pm_gsm_dev);
++
++ switch (system_rev) {
++ case GTA01v3_SYSTEM_REV:
++ case GTA01v4_SYSTEM_REV:
++ /* just use the default (GTA01_IRQ_PCF50606) */
++ break;
++ case GTA01Bv2_SYSTEM_REV:
++ case GTA01Bv3_SYSTEM_REV:
++ /* just use the default (GTA01_IRQ_PCF50606) */
++ gta01_led_resources[0].start =
++ gta01_led_resources[0].end = GTA01Bv2_GPIO_VIBRATOR_ON;
++ break;
++ case GTA01Bv4_SYSTEM_REV:
++ gta01_pmu_resources[0].start =
++ gta01_pmu_resources[0].end = GTA01Bv4_IRQ_PCF50606;
++ gta01_led_resources[0].start =
++ gta01_led_resources[0].end = GTA01Bv4_GPIO_VIBRATOR_ON;
++ break;
++ }
++ mangle_pmu_pdata_by_system_rev();
++ platform_device_register(>a01_pmu_dev);
++ platform_device_register(>a01_led_dev);
++
++ platform_device_register(>a02_sdio_dev);
++
++ platform_add_devices(gta01_devices, ARRAY_SIZE(gta01_devices));
++
++ s3c2410_pm_init();
++
++ set_irq_type(GTA01_IRQ_MODEM, IRQT_RISING);
++ request_irq(GTA01_IRQ_MODEM, gta01_modem_irq, 0, "modem", NULL);
++ enable_irq_wake(GTA01_IRQ_MODEM);
++}
++
++MACHINE_START(NEO1973_GTA02F, "GTA02")
++ .phys_io = S3C2410_PA_UART,
++ .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
++ .boot_params = S3C2410_SDRAM_PA + 0x100,
++ .map_io = gta01_map_io,
++ .init_irq = s3c24xx_init_irq,
++ .init_machine = gta02f_machine_init,
++ .timer = &s3c24xx_timer,
++MACHINE_END
+diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
+index 1c2fb61..9add88e 100644
+--- a/arch/arm/mach-s3c2440/mach-gta02.c
++++ b/arch/arm/mach-s3c2440/mach-gta02.c
+@@ -296,7 +296,7 @@ static struct resource gta02_pmu_resources[] = {
+ },
+ };
+
+-struct platform_device gta02_pmu_dev = {
++static struct platform_device gta02_pmu_dev = {
+ .name = "pcf50633",
+ .num_resources = ARRAY_SIZE(gta02_pmu_resources),
+ .resource = gta02_pmu_resources,
+@@ -542,7 +542,7 @@ static struct resource gta02_led_resources[] = {
+ },
+ };
+
+-struct platform_device gta02_led_dev = {
++static struct platform_device gta02_led_dev = {
+ .name = "gta02-led",
+ .num_resources = ARRAY_SIZE(gta02_led_resources),
+ .resource = gta02_led_resources,
+diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
+index 0a9a5e7..f2d90b0 100644
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -1367,3 +1367,4 @@ db88f5281 MACH_DB88F5281 DB88F5281 1358
+ csb726 MACH_CSB726 CSB726 1359
+ tik27 MACH_TIK27 TIK27 1360
+ mx_uc7420 MACH_MX_UC7420 MX_UC7420 1361
++neo1973_gta02f MACH_NEO1973_GTA02F NEO1973_GTA02F 1555
+diff --git a/drivers/sdio/function/bluetooth/sdio_bt_os.c b/drivers/sdio/function/bluetooth/sdio_bt_os.c
+index 869f718..da9da98 100644
+--- a/drivers/sdio/function/bluetooth/sdio_bt_os.c
++++ b/drivers/sdio/function/bluetooth/sdio_bt_os.c
+@@ -55,6 +55,7 @@
+ #define AUTHOR "Atheros Communications, Inc."
+
+ /* debug print parameter */
++int debuglevel;
+ module_param(debuglevel, int, 0644);
+ MODULE_PARM_DESC(debuglevel, "debuglevel 0-7, controls debug prints");
+
+@@ -455,7 +456,7 @@ static BOOL Probe(PSDFUNCTION pFunction, PSDDEVICE pDevice) {
+ break;
+ }
+
+- pHciDev->type = HCI_VHCI; /* we don't really have a type assigned ????*/
++ pHciDev->type = HCI_SDIO;
+ pHciDev->driver_data = pNewHci;
+ pHciDev->open = bt_open;
+ pHciDev->close = bt_close;
+diff --git a/drivers/sdio/function/gps/gps_os.c b/drivers/sdio/function/gps/gps_os.c
+index 1de0e54..cdec997 100644
+--- a/drivers/sdio/function/gps/gps_os.c
++++ b/drivers/sdio/function/gps/gps_os.c
+@@ -58,6 +58,7 @@
+
+
+ /* debug print parameter */
++int debuglevel;
+ module_param(debuglevel, int, 0644);
+ MODULE_PARM_DESC(debuglevel, "debuglevel 0-7, controls debug prints");
+ int fixedbaud = 1;
+@@ -84,8 +85,8 @@ static void gps_enable_ms(struct uart_port *port);
+ static void gps_break_ctl(struct uart_port *port, int break_state);
+ static int gps_startup(struct uart_port *port);
+ static void gps_shutdown(struct uart_port *port);
+-static void gps_set_termios(struct uart_port *port, struct termios *termios,
+- struct termios *old);
++static void gps_set_termios(struct uart_port *port, struct ktermios *termios,
++ struct ktermios *old);
+ static void gps_pm(struct uart_port *port, unsigned int state, unsigned int oldstate);
+ static const char *gps_type(struct uart_port *port);
+ static void gps_release_port(struct uart_port *port);
+@@ -391,8 +392,8 @@ static void gps_shutdown(struct uart_port *port)
+ /*
+ * gps_set_termios - set data parameters
+ */
+-static void gps_set_termios(struct uart_port *port, struct termios *termios,
+- struct termios *old)
++static void gps_set_termios(struct uart_port *port, struct ktermios *termios,
++ struct ktermios *old)
+ {
+ PSDGPS_DEVICE pDevice = CONTAINING_STRUCT(port, SDGPS_DEVICE, Port);
+ unsigned char cval = 0;
+diff --git a/drivers/sdio/function/memory/sdio_memory_os.c b/drivers/sdio/function/memory/sdio_memory_os.c
+index 4e3eb53..e086095 100644
+--- a/drivers/sdio/function/memory/sdio_memory_os.c
++++ b/drivers/sdio/function/memory/sdio_memory_os.c
+@@ -63,6 +63,7 @@
+ #define AUTHOR "Atheros Communications, Inc."
+
+ /* debug print parameter */
++int debuglevel;
+ module_param(debuglevel, int, 0644);
+ MODULE_PARM_DESC(debuglevel, "debuglevel 0-7, controls debug prints");
+
+@@ -567,7 +568,7 @@ static void DiskRequest(request_queue_t *pQueue)
+ if (!blk_fs_request(pRequest)) {
+ /* not a command we care about */
+ DBG_PRINT(SDDBG_TRACE, ("SDIO Memory Function: DiskRequest - unsupported command: flags 0x%X\n",
+- (UINT)pRequest->flags));
++ (UINT) 0));
+ end_request(pRequest, 0);
+ continue;
+ }
+@@ -744,7 +745,7 @@ static void DiskRequestDma(request_queue_t *pQueue)
+ if (!blk_fs_request(pRequest)) {
+ /* not a command we care about */
+ DBG_PRINT(SDDBG_TRACE, ("SDIO Memory Function: DiskRequestDma - unsupported command: flags 0x%X\n",
+- (UINT)pRequest->flags));
++ (UINT) 0));
+ end_request(pRequest, 0);
+ /* reset */
+ outstandingReq = 1;
+diff --git a/include/asm-arm/plat-s3c24xx/pm.h b/include/asm-arm/plat-s3c24xx/pm.h
+index cc62366..20e03b3 100644
+--- a/include/asm-arm/plat-s3c24xx/pm.h
++++ b/include/asm-arm/plat-s3c24xx/pm.h
+@@ -16,6 +16,8 @@
+
+ #ifdef CONFIG_PM
+
++#include <linux/sysdev.h>
++
+ extern __init int s3c2410_pm_init(void);
+
+ #else
More information about the commitlog
mailing list