r1038 - in trunk/oe/packages/linux: linux-gta01 linux-qt2410
mickey at sita.openmoko.org
mickey at sita.openmoko.org
Sun Feb 18 12:13:10 CET 2007
Author: mickey
Date: 2007-02-18 12:13:10 +0100 (Sun, 18 Feb 2007)
New Revision: 1038
Removed:
trunk/oe/packages/linux/linux-gta01/udc-nomodule-misccr.patch
trunk/oe/packages/linux/linux-qt2410/defconfig-armzone-qt2410.laforge
trunk/oe/packages/linux/linux-qt2410/new/
trunk/oe/packages/linux/linux-qt2410/patches-2.6.17.7-qt2401-20060806.tar.bz2
trunk/oe/packages/linux/linux-qt2410/qt2410-biglcd.patch
trunk/oe/packages/linux/linux-qt2410/qt2410-touchscreen.patch
Log:
oe/linux: cleanup and remove outdated files
Deleted: trunk/oe/packages/linux/linux-gta01/udc-nomodule-misccr.patch
===================================================================
--- trunk/oe/packages/linux/linux-gta01/udc-nomodule-misccr.patch 2007-02-17 14:10:10 UTC (rev 1037)
+++ trunk/oe/packages/linux/linux-gta01/udc-nomodule-misccr.patch 2007-02-18 11:13:10 UTC (rev 1038)
@@ -1,22 +0,0 @@
-Index: linux-2.6.17.14-fic1/drivers/usb/gadget/s3c2410_udc.c
-===================================================================
---- linux-2.6.17.14-fic1.orig/drivers/usb/gadget/s3c2410_udc.c 2006-11-03 01:22:14.000000000 +0100
-+++ linux-2.6.17.14-fic1/drivers/usb/gadget/s3c2410_udc.c 2006-11-03 12:41:52.000000000 +0100
-@@ -1492,7 +1492,7 @@
- return -ENODEV;
- if (udc->driver)
- return -EBUSY;
-- if (!driver->bind || !driver->unbind || !driver->setup
-+ if (!driver->bind || !driver->setup
- || driver->speed == USB_SPEED_UNKNOWN)
- return -EINVAL;
-
-@@ -1700,6 +1700,8 @@
- }
- dprintk(DEBUG_VERBOSE, "%s: got irq %i\n", gadget_name, IRQ_USBD);
-
-+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST|S3C2410_MISCCR_USBSUSPND0|S3C2410_MISCCR_USBSUSPND1, 0);
-+
- #ifdef ENABLE_SYSFS
- /* create device files */
- device_create_file(&pdev->dev, &dev_attr_regs);
Deleted: trunk/oe/packages/linux/linux-qt2410/defconfig-armzone-qt2410.laforge
===================================================================
--- trunk/oe/packages/linux/linux-qt2410/defconfig-armzone-qt2410.laforge 2007-02-17 14:10:10 UTC (rev 1037)
+++ trunk/oe/packages/linux/linux-qt2410/defconfig-armzone-qt2410.laforge 2007-02-18 11:13:10 UTC (rev 1038)
@@ -1,1438 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17.7
-# Mon Aug 7 00:28:40 2006
-#
-CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_VECTORS_BASE=0xffff0000
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_EMBEDDED is not set
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-# CONFIG_BLK_DEV_IO_TRACE is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# System Type
-#
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-CONFIG_ARCH_S3C2410=y
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
-
-#
-# S3C24XX Implementations
-#
-# CONFIG_MACH_ANUBIS is not set
-# CONFIG_MACH_OSIRIS is not set
-# CONFIG_ARCH_BAST is not set
-# CONFIG_ARCH_H1940 is not set
-# CONFIG_MACH_N30 is not set
-# CONFIG_ARCH_SMDK2410 is not set
-CONFIG_MACH_QT2410=y
-# CONFIG_ARCH_S3C2440 is not set
-# CONFIG_MACH_VR1000 is not set
-# CONFIG_MACH_RX3715 is not set
-# CONFIG_MACH_OTOM is not set
-# CONFIG_MACH_NEXCODER_2440 is not set
-CONFIG_CPU_S3C2410=y
-
-#
-# S3C2410 Boot
-#
-# CONFIG_S3C2410_BOOT_ERROR_RESET is not set
-
-#
-# S3C2410 Setup
-#
-CONFIG_S3C2410_DMA=y
-# CONFIG_S3C2410_DMA_DEBUG is not set
-CONFIG_S3C2410_PM_DEBUG=y
-# CONFIG_S3C2410_PM_CHECK is not set
-CONFIG_S3C2410_LOWLEVEL_UART_PORT=0
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4T=y
-CONFIG_CPU_CACHE_V4WT=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-CONFIG_CPU_ICACHE_DISABLE=y
-CONFIG_CPU_DCACHE_DISABLE=y
-
-#
-# Bus support
-#
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_PREEMPT is not set
-# CONFIG_NO_IDLE_HZ is not set
-CONFIG_HZ=200
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/mmcblk0p1 rootdelay=10"
-# CONFIG_XIP_KERNEL is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
-
-#
-# Power management options
-#
-CONFIG_PM=y
-CONFIG_PM_LEGACY=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_APM=m
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=m
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-# CONFIG_NET_IPGRE_BROADCAST is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_TUNNEL=m
-CONFIG_INET_TUNNEL=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_INET6_XFRM_TUNNEL=m
-CONFIG_INET6_TUNNEL=m
-CONFIG_IPV6_TUNNEL=m
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_CLK_JIFFIES is not set
-CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
-# CONFIG_NET_SCH_CLK_CPU is not set
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_INGRESS=m
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_CLS_U32_PERF=y
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_POLICE is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_ESTIMATOR=y
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-# CONFIG_IRLAN is not set
-# CONFIG_IRNET is not set
-# CONFIG_IRCOMM is not set
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_USB_IRDA is not set
-# CONFIG_SIGMATEL_FIR is not set
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-CONFIG_BT_HCIVHCI=m
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-CONFIG_CONNECTOR=m
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-# CONFIG_RFD_FTL is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x4000000
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_IDS=y
-CONFIG_MTD_NAND_S3C2410=y
-# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
-# CONFIG_MTD_NAND_S3C2410_HWECC is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_UB=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
-#
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
-CONFIG_BLK_DEV_IDECD=y
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-
-#
-# IDE chipset support/bugfixes
-#
-CONFIG_IDE_GENERIC=y
-# CONFIG_IDE_ARM is not set
-# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_DEBUG is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DM_MULTIPATH is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
-# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-CONFIG_NET_PCI=y
-CONFIG_CS89x0=y
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-CONFIG_PPP=m
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-# CONFIG_PPPOE is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_S3C2410=y
-CONFIG_SERIAL_S3C2410_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_S3C2410_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
-
-#
-# I2C support
-#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
-
-#
-# I2C Hardware Bus support
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-CONFIG_I2C_S3C2410=y
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
-CONFIG_SPI=y
-# CONFIG_SPI_DEBUG is not set
-CONFIG_SPI_MASTER=y
-
-#
-# SPI Master Controller Drivers
-#
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_S3C24XX_GPIO=y
-CONFIG_SPI_S3C24XX=y
-
-#
-# SPI Protocol Masters
-#
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-
-#
-# Misc devices
-#
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-CONFIG_FB=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_S3C2410=y
-CONFIG_FB_S3C2410_DEBUG=y
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-
-#
-# Logo configuration
-#
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_DEVICE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_DEVICE=y
-
-#
-# Sound
-#
-CONFIG_SOUND=m
-
-#
-# Advanced Linux Sound Architecture
-#
-CONFIG_SND=m
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_ALAUDA=y
-CONFIG_USB_LIBUSUAL=y
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-CONFIG_USB_MON=y
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-CONFIG_USB_GADGET=y
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_PXA2XX is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-CONFIG_USB_GADGET_S3C2410=y
-CONFIG_USB_S3C2410=y
-# CONFIG_USB_S3C2410_DEBUG is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-# CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
-CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-
-#
-# MMC/SD Card support
-#
-CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_S3C2410=y
-
-#
-# Real Time Clock
-#
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-
-#
-# RTC drivers
-#
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
-CONFIG_INOTIFY=y
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-# CONFIG_ZISOFS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS_FS=m
-CONFIG_JFFS_FS_VERBOSE=0
-# CONFIG_JFFS_PROC_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
-CONFIG_NLS=m
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_DEBUG_VM is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_UNWIND_INFO=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEBUG_WAITQ is not set
-# CONFIG_DEBUG_ERRORS is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-CONFIG_DEBUG_S3C2410_PORT=y
-CONFIG_DEBUG_S3C2410_UART=0
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-CONFIG_CRC32=y
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
Deleted: trunk/oe/packages/linux/linux-qt2410/patches-2.6.17.7-qt2401-20060806.tar.bz2
===================================================================
(Binary files differ)
Deleted: trunk/oe/packages/linux/linux-qt2410/qt2410-biglcd.patch
===================================================================
--- trunk/oe/packages/linux/linux-qt2410/qt2410-biglcd.patch 2007-02-17 14:10:10 UTC (rev 1037)
+++ trunk/oe/packages/linux/linux-qt2410/qt2410-biglcd.patch 2007-02-18 11:13:10 UTC (rev 1038)
@@ -1,178 +0,0 @@
-Index: linux-2.6.17.7-new/arch/arm/mach-s3c2410/mach-qt2410.c
-===================================================================
---- linux-2.6.17.7-new.orig/arch/arm/mach-s3c2410/mach-qt2410.c 2006-08-27 19:07:33.000000000 +0530
-+++ linux-2.6.17.7-new/arch/arm/mach-s3c2410/mach-qt2410.c 2006-08-28 15:38:02.000000000 +0530
-@@ -94,6 +94,133 @@
-
- /* LCD driver info */
-
-+/* Configuration for 640x480 SHARP LQ080V3DG01 */
-+static struct s3c2410fb_mach_info qt2410_biglcd_cfg __initdata = {
-+ .regs = {
-+
-+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
-+ S3C2410_LCDCON1_TFT |
-+ S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
-+
-+ .lcdcon2 = S3C2410_LCDCON2_VBPD(18) | /* 19 */
-+ S3C2410_LCDCON2_LINEVAL(479) |
-+ S3C2410_LCDCON2_VFPD(10) | /* 11 */
-+ S3C2410_LCDCON2_VSPW(14), /* 15 */
-+
-+ .lcdcon3 = S3C2410_LCDCON3_HBPD(43) | /* 44 */
-+ S3C2410_LCDCON3_HOZVAL(639) | /* 640 */
-+ S3C2410_LCDCON3_HFPD(115), /* 116 */
-+
-+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
-+ S3C2410_LCDCON4_HSPW(95), /* 96 */
-+
-+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
-+ S3C2410_LCDCON5_INVVLINE |
-+ S3C2410_LCDCON5_INVVFRAME |
-+ S3C2410_LCDCON5_PWREN |
-+ S3C2410_LCDCON5_HWSWP,
-+ },
-+
-+#if 0
-+ /* currently setup by downloader */
-+ .gpccon = 0xaa940659,
-+ .gpccon_mask = 0xffffffff,
-+ .gpcup = 0x0000ffff,
-+ .gpcup_mask = 0xffffffff,
-+ .gpdcon = 0xaa84aaa0,
-+ .gpdcon_mask = 0xffffffff,
-+ .gpdup = 0x0000faff,
-+ .gpdup_mask = 0xffffffff,
-+#endif
-+
-+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
-+
-+ .width = 640,
-+ .height = 480,
-+
-+ .xres = {
-+ .min = 640,
-+ .max = 640,
-+ .defval = 640,
-+ },
-+
-+ .yres = {
-+ .min = 480,
-+ .max = 480,
-+ .defval = 480,
-+ },
-+
-+ .bpp = {
-+ .min = 16,
-+ .max = 16,
-+ .defval = 16,
-+ },
-+};
-+
-+/* Configuration for 480x640 toppoly TD028TTEC1 */
-+static struct s3c2410fb_mach_info qt2410_prodlcd_cfg __initdata = {
-+ .regs = {
-+
-+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
-+ S3C2410_LCDCON1_TFT |
-+ S3C2410_LCDCON1_CLKVAL(0x01), /* HCLK/4 */
-+
-+ .lcdcon2 = S3C2410_LCDCON2_VBPD(1) | /* 2 */
-+ S3C2410_LCDCON2_LINEVAL(639) |/* 640 */
-+ S3C2410_LCDCON2_VFPD(3) | /* 4 */
-+ S3C2410_LCDCON2_VSPW(1), /* 2 */
-+
-+ .lcdcon3 = S3C2410_LCDCON3_HBPD(7) | /* 8 */
-+ S3C2410_LCDCON3_HOZVAL(479) | /* 479 */
-+ S3C2410_LCDCON3_HFPD(23), /* 24 */
-+
-+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
-+ S3C2410_LCDCON4_HSPW(7), /* 8 */
-+
-+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
-+ S3C2410_LCDCON5_INVVLINE |
-+ S3C2410_LCDCON5_INVVFRAME |
-+ S3C2410_LCDCON5_PWREN |
-+ S3C2410_LCDCON5_HWSWP,
-+ },
-+
-+#if 0
-+ /* currently setup by downloader */
-+ .gpccon = 0xaa940659,
-+ .gpccon_mask = 0xffffffff,
-+ .gpcup = 0x0000ffff,
-+ .gpcup_mask = 0xffffffff,
-+ .gpdcon = 0xaa84aaa0,
-+ .gpdcon_mask = 0xffffffff,
-+ .gpdup = 0x0000faff,
-+ .gpdup_mask = 0xffffffff,
-+#endif
-+
-+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
-+
-+ .width = 480,
-+ .height = 640,
-+
-+ .xres = {
-+ .min = 480,
-+ .max = 480,
-+ .defval = 480,
-+ },
-+
-+ .yres = {
-+ .min = 640,
-+ .max = 640,
-+ .defval = 640,
-+ },
-+
-+ .bpp = {
-+ .min = 16,
-+ .max = 16,
-+ .defval = 16,
-+ },
-+};
-+
-+/* Config for 240x320 LCD */
- static struct s3c2410fb_mach_info qt2410_lcd_cfg __initdata = {
- .regs = {
-
-@@ -275,6 +402,17 @@
- .oversampling_shift = 2,
- };
-
-+static char tft_type = 's';
-+
-+int __init tft_setup(char *str)
-+{
-+ tft_type = str[0];
-+ return 1;
-+}
-+
-+__setup("tft=", tft_setup);
-+
-+
- static void __init qt2410_map_io(void)
- {
- s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-@@ -299,7 +437,20 @@
-
- s3c_device_nand.dev.platform_data = &qt2410_nand_info;
- s3c_device_sdi.dev.platform_data = &qt2410_mmc_cfg;
-- s3c24xx_fb_set_platdata(&qt2410_lcd_cfg);
-+
-+ switch (tft_type) {
-+ case 'p': /* production */
-+ s3c24xx_fb_set_platdata(&qt2410_prodlcd_cfg);
-+ break;
-+ case 'b': /* big */
-+ s3c24xx_fb_set_platdata(&qt2410_biglcd_cfg);
-+ break;
-+ case 's': /* small */
-+ default:
-+ s3c24xx_fb_set_platdata(&qt2410_lcd_cfg);
-+ break;
-+ }
-+
- s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
- set_s3c2410ts_info(&qt2410_ts_cfg);
-
Deleted: trunk/oe/packages/linux/linux-qt2410/qt2410-touchscreen.patch
===================================================================
--- trunk/oe/packages/linux/linux-qt2410/qt2410-touchscreen.patch 2007-02-17 14:10:10 UTC (rev 1037)
+++ trunk/oe/packages/linux/linux-qt2410/qt2410-touchscreen.patch 2007-02-18 11:13:10 UTC (rev 1038)
@@ -1,530 +0,0 @@
-Index: linux-2.6.17.7-new/arch/arm/mach-s3c2410/devs.c
-===================================================================
---- linux-2.6.17.7-new.orig/arch/arm/mach-s3c2410/devs.c 2006-08-07 09:34:31.000000000 +0200
-+++ linux-2.6.17.7-new/arch/arm/mach-s3c2410/devs.c 2006-08-07 17:36:09.000000000 +0200
-@@ -37,6 +37,7 @@
-
- #include <asm/arch/regs-serial.h>
- #include <asm/arch/udc.h>
-+#include <asm/arch/ts.h>
-
- #include "devs.h"
-
-@@ -137,6 +138,23 @@
-
- EXPORT_SYMBOL(s3c_device_nand);
-
-+/* Touchscreen */
-+struct platform_device s3c_device_ts = {
-+ .name = "s3c2410-ts",
-+ .id = -1,
-+};
-+
-+EXPORT_SYMBOL(s3c_device_ts);
-+
-+static struct s3c2410_ts_mach_info s3c2410ts_info;
-+
-+void __init set_s3c2410ts_info(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
-+{
-+ memcpy(&s3c2410ts_info,hard_s3c2410ts_info,sizeof(struct s3c2410_ts_mach_info));
-+ s3c_device_ts.dev.platform_data = &s3c2410ts_info;
-+}
-+EXPORT_SYMBOL(set_s3c2410ts_info);
-+
- /* USB Device (Gadget)*/
-
- static struct resource s3c_usbgadget_resource[] = {
-Index: linux-2.6.17.7-new/arch/arm/mach-s3c2410/devs.h
-===================================================================
---- linux-2.6.17.7-new.orig/arch/arm/mach-s3c2410/devs.h 2006-07-25 05:36:01.000000000 +0200
-+++ linux-2.6.17.7-new/arch/arm/mach-s3c2410/devs.h 2006-08-07 17:36:09.000000000 +0200
-@@ -39,6 +39,7 @@
- extern struct platform_device s3c_device_timer3;
-
- extern struct platform_device s3c_device_usbgadget;
-+extern struct platform_device s3c_device_ts;
-
- /* s3c2440 specific devices */
-
-Index: linux-2.6.17.7-new/drivers/input/touchscreen/Kconfig
-===================================================================
---- linux-2.6.17.7-new.orig/drivers/input/touchscreen/Kconfig 2006-07-25 05:36:01.000000000 +0200
-+++ linux-2.6.17.7-new/drivers/input/touchscreen/Kconfig 2006-08-07 17:36:09.000000000 +0200
-@@ -49,6 +49,24 @@
- To compile this driver as a module, choose M here: the
- module will be called corgi_ts.
-
-+config TOUCHSCREEN_S3C2410
-+ tristate "Samsung S3C2410 touchscreen input driver"
-+ depends on ARCH_S3C2410 && INPUT && INPUT_TOUCHSCREEN
-+ select SERIO
-+ help
-+ Say Y here if you have the s3c2410 touchscreen.
-+
-+ If unsure, say N.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called s3c2410_ts.
-+
-+config TOUCHSCREEN_S3C2410_DEBUG
-+ boolean "Samsung S3C2410 touchscreen debug messages"
-+ depends on TOUCHSCREEN_S3C2410
-+ help
-+ Select this if you want debug messages
-+
- config TOUCHSCREEN_GUNZE
- tristate "Gunze AHL-51S touchscreen"
- select SERIO
-Index: linux-2.6.17.7-new/drivers/input/touchscreen/Makefile
-===================================================================
---- linux-2.6.17.7-new.orig/drivers/input/touchscreen/Makefile 2006-07-25 05:36:01.000000000 +0200
-+++ linux-2.6.17.7-new/drivers/input/touchscreen/Makefile 2006-08-07 17:36:09.000000000 +0200
-@@ -12,3 +12,5 @@
- obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
- obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
- obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
-+obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
-+
-Index: linux-2.6.17.7-new/drivers/input/touchscreen/s3c2410_ts.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.17.7-new/drivers/input/touchscreen/s3c2410_ts.c 2006-08-07 17:36:09.000000000 +0200
-@@ -0,0 +1,351 @@
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard at rtp-net.org>
-+ * iPAQ H1940 touchscreen support
-+ *
-+ * ChangeLog
-+ *
-+ * 2004-09-05: Herbert Pötzl <herbert at 13thfloor.at>
-+ * - added clock (de-)allocation code
-+ *
-+ * 2005-03-06: Arnaud Patard <arnaud.patard at rtp-net.org>
-+ * - h1940_ -> s3c2410 (this driver is now also used on the n30
-+ * machines :P)
-+ * - Debug messages are now enabled with the config option
-+ * TOUCHSCREEN_S3C2410_DEBUG
-+ * - Changed the way the value are read
-+ * - Input subsystem should now work
-+ * - Use ioremap and readl/writel
-+ *
-+ * 2005-03-23: Arnaud Patard <arnaud.patard at rtp-net.org>
-+ * - Make use of some undocumented features of the touchscreen
-+ * controller
-+ *
-+ */
-+
-+#include <linux/config.h>
-+#include <linux/errno.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/input.h>
-+#include <linux/init.h>
-+#include <linux/serio.h>
-+#include <linux/delay.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+
-+#include <asm/arch/regs-adc.h>
-+#include <asm/arch/regs-gpio.h>
-+#include <asm/arch/ts.h>
-+
-+/* For ts.dev.id.version */
-+#define S3C2410TSVERSION 0x0101
-+
-+#define WAIT4INT(x) (((x)<<8) | \
-+ S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | S3C2410_ADCTSC_XP_SEN | \
-+ S3C2410_ADCTSC_XY_PST(3))
-+
-+#define AUTOPST (S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | S3C2410_ADCTSC_XP_SEN | \
-+ S3C2410_ADCTSC_AUTO_PST | S3C2410_ADCTSC_XY_PST(0))
-+
-+#define DEBUG_LVL KERN_DEBUG
-+
-+MODULE_AUTHOR("Arnaud Patard <arnaud.patard at rtp-net.org>");
-+MODULE_DESCRIPTION("s3c2410 touchscreen driver");
-+MODULE_LICENSE("GPL");
-+
-+/*
-+ * Definitions & global arrays.
-+ */
-+
-+
-+static char *s3c2410ts_name = "s3c2410 TouchScreen";
-+
-+/*
-+ * Per-touchscreen data.
-+ */
-+
-+struct s3c2410ts {
-+ struct input_dev *dev;
-+ long xp;
-+ long yp;
-+ int count;
-+ int shift;
-+};
-+
-+static struct s3c2410ts ts;
-+static void __iomem *base_addr;
-+
-+static inline void s3c2410_ts_connect(void)
-+{
-+ s3c2410_gpio_cfgpin(S3C2410_GPG12, S3C2410_GPG12_XMON);
-+ s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPG13_nXPON);
-+ s3c2410_gpio_cfgpin(S3C2410_GPG14, S3C2410_GPG14_YMON);
-+ s3c2410_gpio_cfgpin(S3C2410_GPG15, S3C2410_GPG15_nYPON);
-+}
-+
-+static void touch_timer_fire(unsigned long data)
-+{
-+ unsigned long data0;
-+ unsigned long data1;
-+ int updown;
-+
-+ data0 = readl(base_addr+S3C2410_ADCDAT0);
-+ data1 = readl(base_addr+S3C2410_ADCDAT1);
-+
-+ updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && (!(data1 & S3C2410_ADCDAT0_UPDOWN));
-+
-+ if (updown) {
-+ if (ts.count != 0) {
-+ ts.xp >>= ts.shift;
-+ ts.yp >>= ts.shift;
-+
-+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
-+ {
-+ struct timeval tv;
-+ do_gettimeofday(&tv);
-+ printk(DEBUG_LVL "T: %06d, X: %03ld, Y: %03ld\n", (int)tv.tv_usec, ts.xp, ts.yp);
-+ }
-+#endif
-+
-+ input_report_abs(ts.dev, ABS_X, ts.xp);
-+ input_report_abs(ts.dev, ABS_Y, ts.yp);
-+
-+ input_report_key(ts.dev, BTN_TOUCH, 1);
-+ input_report_abs(ts.dev, ABS_PRESSURE, 1);
-+ input_sync(ts.dev);
-+ }
-+
-+ ts.xp = 0;
-+ ts.yp = 0;
-+ ts.count = 0;
-+
-+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, base_addr+S3C2410_ADCTSC);
-+ writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON);
-+ } else {
-+ ts.count = 0;
-+
-+ input_report_key(ts.dev, BTN_TOUCH, 0);
-+ input_report_abs(ts.dev, ABS_PRESSURE, 0);
-+ input_sync(ts.dev);
-+
-+ writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
-+ }
-+}
-+
-+static struct timer_list touch_timer =
-+ TIMER_INITIALIZER(touch_timer_fire, 0, 0);
-+
-+static irqreturn_t stylus_updown(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ unsigned long data0;
-+ unsigned long data1;
-+ int updown;
-+
-+ data0 = readl(base_addr+S3C2410_ADCDAT0);
-+ data1 = readl(base_addr+S3C2410_ADCDAT1);
-+
-+ updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && (!(data1 & S3C2410_ADCDAT0_UPDOWN));
-+
-+ /* TODO we should never get an interrupt with updown set while
-+ * the timer is running, but maybe we ought to verify that the
-+ * timer isn't running anyways. */
-+
-+ if (updown)
-+ touch_timer_fire(0);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static irqreturn_t stylus_action(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+ unsigned long data0;
-+ unsigned long data1;
-+
-+ data0 = readl(base_addr+S3C2410_ADCDAT0);
-+ data1 = readl(base_addr+S3C2410_ADCDAT1);
-+
-+ ts.xp += data0 & S3C2410_ADCDAT0_XPDATA_MASK;
-+ ts.yp += data1 & S3C2410_ADCDAT1_YPDATA_MASK;
-+ ts.count++;
-+
-+ if (ts.count < (1<<ts.shift)) {
-+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, base_addr+S3C2410_ADCTSC);
-+ writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON);
-+ } else {
-+ mod_timer(&touch_timer, jiffies+1);
-+ writel(WAIT4INT(1), base_addr+S3C2410_ADCTSC);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct clk *adc_clock;
-+
-+/*
-+ * The functions for inserting/removing us as a module.
-+ */
-+
-+static int __init s3c2410ts_probe(struct platform_device *pdev)
-+{
-+ struct s3c2410_ts_mach_info *info;
-+ struct input_dev *input_dev;
-+
-+ info = ( struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
-+
-+ if (!info)
-+ {
-+ printk(KERN_ERR "Hm... too bad : no platform data for ts\n");
-+ return -EINVAL;
-+ }
-+
-+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
-+ printk(DEBUG_LVL "Entering s3c2410ts_init\n");
-+#endif
-+
-+ adc_clock = clk_get(NULL, "adc");
-+ if (!adc_clock) {
-+ printk(KERN_ERR "failed to get adc clock source\n");
-+ return -ENOENT;
-+ }
-+ clk_enable(adc_clock);
-+
-+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
-+ printk(DEBUG_LVL "got and enabled clock\n");
-+#endif
-+
-+ base_addr=ioremap(S3C2410_PA_ADC,0x20);
-+ if (base_addr == NULL) {
-+ printk(KERN_ERR "Failed to remap register block\n");
-+ return -ENOMEM;
-+ }
-+
-+
-+ /* Configure GPIOs */
-+ s3c2410_ts_connect();
-+
-+ if ((info->presc&0xff) > 0)
-+ writel(S3C2410_ADCCON_PRSCEN | S3C2410_ADCCON_PRSCVL(info->presc&0xFF),\
-+ base_addr+S3C2410_ADCCON);
-+ else
-+ writel(0,base_addr+S3C2410_ADCCON);
-+
-+
-+ /* Initialise registers */
-+ if ((info->delay&0xffff) > 0)
-+ writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY);
-+
-+ writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
-+
-+ /* Initialise input stuff */
-+ memset(&ts, 0, sizeof(struct s3c2410ts));
-+ input_dev = input_allocate_device();
-+
-+ if (!input_dev) {
-+ printk(KERN_ERR "Unable to allocate the input device !!\n");
-+ return -ENOMEM;
-+ }
-+
-+ ts.dev = input_dev;
-+ ts.dev->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
-+ ts.dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
-+ input_set_abs_params(ts.dev, ABS_X, 0, 0x3FF, 0, 0);
-+ input_set_abs_params(ts.dev, ABS_Y, 0, 0x3FF, 0, 0);
-+ input_set_abs_params(ts.dev, ABS_PRESSURE, 0, 1, 0, 0);
-+
-+ ts.dev->private = &ts;
-+ ts.dev->name = s3c2410ts_name;
-+ ts.dev->id.bustype = BUS_RS232;
-+ ts.dev->id.vendor = 0xDEAD;
-+ ts.dev->id.product = 0xBEEF;
-+ ts.dev->id.version = S3C2410TSVERSION;
-+
-+ ts.shift = info->oversampling_shift;
-+
-+ /* Get irqs */
-+ if (request_irq(IRQ_ADC, stylus_action, SA_SAMPLE_RANDOM,
-+ "s3c2410_action", ts.dev)) {
-+ printk(KERN_ERR "s3c2410_ts.c: Could not allocate ts IRQ_ADC !\n");
-+ iounmap(base_addr);
-+ return -EIO;
-+ }
-+ if (request_irq(IRQ_TC, stylus_updown, SA_SAMPLE_RANDOM,
-+ "s3c2410_action", ts.dev)) {
-+ printk(KERN_ERR "s3c2410_ts.c: Could not allocate ts IRQ_TC !\n");
-+ iounmap(base_addr);
-+ return -EIO;
-+ }
-+
-+ printk(KERN_INFO "%s successfully loaded\n", s3c2410ts_name);
-+
-+ /* All went ok, so register to the input system */
-+ input_register_device(ts.dev);
-+
-+ return 0;
-+}
-+
-+static int s3c2410ts_remove(struct platform_device *pdev)
-+{
-+ disable_irq(IRQ_ADC);
-+ disable_irq(IRQ_TC);
-+ free_irq(IRQ_TC,ts.dev);
-+ free_irq(IRQ_ADC,ts.dev);
-+
-+ if (adc_clock) {
-+ clk_disable(adc_clock);
-+ clk_put(adc_clock);
-+ adc_clock = NULL;
-+ }
-+
-+ input_unregister_device(ts.dev);
-+ iounmap(base_addr);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver s3c2410ts_driver = {
-+ .driver = {
-+ .name = "s3c2410-ts",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = s3c2410ts_probe,
-+ .remove = s3c2410ts_remove,
-+};
-+
-+
-+static int __init s3c2410ts_init(void)
-+{
-+ return platform_driver_register(&s3c2410ts_driver);
-+}
-+
-+static void __exit s3c2410ts_exit(void)
-+{
-+ platform_driver_unregister(&s3c2410ts_driver);
-+}
-+
-+module_init(s3c2410ts_init);
-+module_exit(s3c2410ts_exit);
-+
-+/*
-+ Local variables:
-+ compile-command: "make ARCH=arm CROSS_COMPILE=/usr/local/arm/3.3.2/bin/arm-linux- -k -C ../../.."
-+ c-basic-offset: 8
-+ End:
-+*/
-Index: linux-2.6.17.7-new/include/asm-arm/arch-s3c2410/regs-adc.h
-===================================================================
---- linux-2.6.17.7-new.orig/include/asm-arm/arch-s3c2410/regs-adc.h 2006-07-25 05:36:01.000000000 +0200
-+++ linux-2.6.17.7-new/include/asm-arm/arch-s3c2410/regs-adc.h 2006-08-07 17:36:09.000000000 +0200
-@@ -44,7 +44,7 @@
- #define S3C2410_ADCTSC_XP_SEN (1<<4)
- #define S3C2410_ADCTSC_PULL_UP_DISABLE (1<<3)
- #define S3C2410_ADCTSC_AUTO_PST (1<<2)
--#define S3C2410_ADCTSC_XY_PST (0x3<<0)
-+#define S3C2410_ADCTSC_XY_PST(x) (((x)&0x3)<<0)
-
- /* ADCDAT0 Bits */
- #define S3C2410_ADCDAT0_UPDOWN (1<<15)
-Index: linux-2.6.17.7-new/include/asm-arm/arch-s3c2410/ts.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-2.6.17.7-new/include/asm-arm/arch-s3c2410/ts.h 2006-08-07 17:36:09.000000000 +0200
-@@ -0,0 +1,28 @@
-+/* linux/include/asm/arch-s3c2410/ts.h
-+ *
-+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard at rtp-net.org>
-+ *
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ *
-+ * Changelog:
-+ * 24-Mar-2005 RTP Created file
-+ * 03-Aug-2005 RTP Renamed to ts.h
-+ */
-+
-+#ifndef __ASM_ARM_TS_H
-+#define __ASM_ARM_TS_H
-+
-+struct s3c2410_ts_mach_info {
-+ int delay;
-+ int presc;
-+ int oversampling_shift;
-+};
-+
-+void __init set_s3c2410ts_info(struct s3c2410_ts_mach_info *hard_s3c2410ts_info);
-+
-+#endif /* __ASM_ARM_TS_H */
-+
-Index: linux-2.6.17.7-new/arch/arm/mach-s3c2410/mach-qt2410.c
-===================================================================
---- linux-2.6.17.7-new.orig/arch/arm/mach-s3c2410/mach-qt2410.c 2006-08-07 17:36:58.000000000 +0200
-+++ linux-2.6.17.7-new/arch/arm/mach-s3c2410/mach-qt2410.c 2006-08-07 17:38:45.000000000 +0200
-@@ -51,6 +51,7 @@
- #include <asm/arch/mmc.h>
- #include <asm/arch/udc.h>
- #include <asm/arch/nand.h>
-+#include <asm/arch/ts.h>
-
- #include "devs.h"
- #include "cpu.h"
-@@ -183,6 +184,7 @@
- &s3c_device_sdi,
- &s3c_device_usbgadget,
- &s3c_device_nand,
-+ &s3c_device_ts,
- &cs89x0_device,
- };
-
-@@ -267,6 +269,12 @@
- .udc_command = qt2410_udc_pullup,
- };
-
-+static struct s3c2410_ts_mach_info qt2410_ts_cfg = {
-+ .delay = 10000,
-+ .presc = 49,
-+ .oversampling_shift = 2,
-+};
-+
- static void __init qt2410_map_io(void)
- {
- s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-@@ -293,6 +301,7 @@
- s3c_device_sdi.dev.platform_data = &qt2410_mmc_cfg;
- s3c24xx_fb_set_platdata(&qt2410_lcd_cfg);
- s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
-+ set_s3c2410ts_info(&qt2410_ts_cfg);
-
- s3c2410_pm_init();
- }
More information about the commitlog
mailing list
