r1333 - developers/werner

werner at sita.openmoko.org werner at sita.openmoko.org
Tue Mar 13 05:22:09 CET 2007


Author: werner
Date: 2007-03-13 05:21:55 +0100 (Tue, 13 Mar 2007)
New Revision: 1333

Modified:
   developers/werner/TODO
Log:
Some updates to keep my readers amused.



Modified: developers/werner/TODO
===================================================================
--- developers/werner/TODO	2007-03-13 02:12:59 UTC (rev 1332)
+++ developers/werner/TODO	2007-03-13 04:21:55 UTC (rev 1333)
@@ -12,9 +12,8 @@
 - send customs war story
 
 bugzilla:
-  P0
-  P1
   - #164: improve non-SanDisk microSD support in u-boot 
+  - #212
 
 other:
 - set up automated build tests on buildhost-old
@@ -52,9 +51,10 @@
 - get debug v2 to work
 - local: make fs ("lab") boot into Gentoo directly
 
-review:
-http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=231
-http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=237
+- http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=231
+  switch display backlight GPIO to "output, off" when suspending
+- http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=217
+  Implement NAND OTP area read/write as u-boot commands
 
 - reopen #179 for console without menu
 - we need to check for an invalid block marker in the first _and_
@@ -66,12 +66,14 @@
   +can't optimize. but when it knows what the caller does, whoopee !
   <LaF0rge> if the power button gets pressed often accidentially (when in off
   +mode), then we read the flash again and again and again
+
 block 0/OTP:
 - "sacred"
 - BT MAC
 - host key
 - as little code as possible
 
+- push openocd wait_idle+timeout upstream
 
 * force non-SPI: nope
 * power cycle (SD_ON, not data): nyet
@@ -79,3 +81,13 @@
 * exact speed: nichts
 * manual bit-banging:
 * pessimistic speed: so-so (kingston, toshiba)
+
+- devirginator: use partition names
+
+<LaF0rge> werner: so we should add a 'boot from SD' to the menu
+<LaF0rge> werner: all we need is rootfs=/dev/mmcblk0p1 rootdelay=5
+/uImage
+
+- devirginator: fail if environment is too messed up
+- add not fail-safe keyword
+- find and fix OpenOCD "already halted" error





More information about the commitlog mailing list