r1536 - trunk/doc/hardware/HXD8v011

[laforge at sita.openmoko.org]

Author: laforge
Date: 2007-03-28 17:48:55 +0200 (Wed, 28 Mar 2007)
New Revision: 1536

Modified:
   trunk/doc/hardware/HXD8v011/gpio.txt
Log:
add correct GP*CON values


Modified: trunk/doc/hardware/HXD8v011/gpio.txt
===================================================================
--- trunk/doc/hardware/HXD8v011/gpio.txt	2007-03-28 15:20:50 UTC (rev 1535)
+++ trunk/doc/hardware/HXD8v011/gpio.txt	2007-03-28 15:48:55 UTC (rev 1536)
@@ -24,7 +24,7 @@
 GPA21	O	GPA21	PD
 GPA22	O	nFCE	nNAND_CS0		NAND
 
-GPACON = 101 1110 0000 1111 1111 1111 = 0x5e0fff
+GPACON = 101 1110 0000 1111 1111 1110 = 0x5e0ffe
 
 
 GPB0	O	TOUT0	PWM_LCM1		
@@ -39,7 +39,7 @@
 GPB9	O	GPB9	USB_PULLUP		USB pullup to signal the host that we're ready
 GPB10	NC
 
-GPBCON = 00 0100 0101 0100 1001 0110 = 0x045496
+GPBCON = 00 0100 0101 0101 0100 0010 = 0x045542
  
 
 GPC0	O	GPC0	GPS_RST
@@ -59,7 +59,7 @@
 GPC14	O	VD6	LCD6			LCM
 GPC15	O	VD7	LCD7			LCM
 
-GPCCON = 1010 1010 1010 1010 0001 0010 1010 1001 = 0xaaaa12a9
+GPCCON = 1010 1010 1010 1010 0001 0010 1010 1001 = 0xaaaa55a9
  
 
 GPD0	O	VD8	LCD8			LCM
@@ -111,7 +111,7 @@
 GPF6	I	EINT6	PWR_IRQ			PMU
 GPF7	I	EINT7	CHG_FUL			Charger 
 
-GPFCON = 1010 1010 1001 1001 - 0xaa99
+GPFCON = 1010 1010 1010 1001 - 0xaaa9
 
 
 GPG0	I	EINT8	CAR_DT			
@@ -131,7 +131,7 @@
 GPG14	I	GPG14	GPG14
 GPG15	I	GPG15	GPG15
 
-GPGCON = 1111 1111 0001 0100 1111 0000 1111 1000 = 0xff14f0f8
+GPGCON = 0000 0010 0111 1101 0000 0000 0001 0110 = 0x027d0016
 
 
 GPH0	O	nCTS0	MODEM_CTS		GSM Modem
@@ -146,7 +146,7 @@
 GPH9	O	CLKOUT0	RTCCLK
 GPH10	O	GPH10	GPS_GPIO3		GPS
 
-GPHCON = 00 0000 1111 1010 1010 1010 = 0x00faaa
+GPHCON = 01 0100 1010 1010 1010 1010 = 0x14aaaa
 
 GPJ0	NC
 GPJ1	NC
@@ -161,3 +161,5 @@
 GPJ10	NC
 GPJ11	NC
 GPJ12	NC
+
+GPJCON = 00 0000 0000 0000 0000 0000 0000 = 0x0000000