development kernel tree: Changes to 'stable-2.6.26'
git at git.openmoko.org
git at git.openmoko.org
Mon Aug 4 00:44:50 CEST 2008
arch/arm/mach-s3c2440/mach-gta02.c | 26 +++++++--
arch/arm/plat-s3c24xx/neo1973_pm_gps.c | 12 +++-
arch/arm/plat-s3c24xx/neo1973_pm_gps.h | 1 +
defconfig-2.6.26 | 2 +-
drivers/base/bus.c | 23 ++++++++
drivers/i2c/chips/pcf50606.c | 17 +-----
drivers/mfd/glamo/glamo-core.c | 36 +++++++++----
drivers/mfd/glamo/glamo-core.h | 2 +
drivers/mfd/glamo/glamo-mci.c | 41 +++++++++++---
drivers/sdio/function/wlan/ar6000/hif/hif.c | 2 +-
drivers/sdio/hcd/s3c24xx/s3c24xx_hcd.c | 6 +-
drivers/sdio/hcd/s3c24xx/s3c24xx_hcd.h | 4 +-
drivers/sdio/stack/busdriver/sdio_bus_os.c | 78 ++++++++++++++-------------
include/linux/device.h | 5 ++
include/linux/glamofb.h | 2 +
include/linux/sdio/sdio_busdriver.h | 2 +-
include/linux/sdio/sdio_hcd_defs.h | 2 +-
17 files changed, 173 insertions(+), 88 deletions(-)
New commits:
commit 81bedea31b61abdb8b27dac4834733505dc5f9a0
Author: Andy Green <andy at openmoko.com>
Date: Sun Aug 3 23:43:59 2008 +0100
fix-glamo-crank-memory-to-90MHz.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit b432190e42580a89ed4eb817ad0508e5d9a4b530
Author: Andy Green <andy at openmoko.com>
Date: Sun Aug 3 23:41:40 2008 +0100
fix-glamo-turbo-host-interface.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit d4ccfa30a921c67dd4c49dd1e6574a23c6a417e5
Author: Andy Green <andy at openmoko.com>
Date: Sun Aug 3 22:35:51 2008 +0100
config-kill-mtd-debug.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit 57cbca8ec83b80771aea7644e758b72206e994a7
Author: Andy Green <andy at openmoko.com>
Date: Sun Aug 3 22:35:51 2008 +0100
fix-add-missing-include.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit 748455eca1eb07609ab5cb4d0c4e8a2d50058389
Author: Cesar Eduardo Barros <cesarb at cesarb.net>
Date: Sun Aug 3 22:35:51 2008 +0100
pcf50606: fix gllin compat link
Uses bus_create_device_link to correctly create the gllin compat link.
Signed-off-by: Cesar Eduardo Barros <cesarb at cesarb.net>
commit 0da7f8d63530a4f799dea1e8b872d2d5169de455
Author: Cesar Eduardo Barros <cesarb at cesarb.net>
Date: Sun Aug 3 22:35:51 2008 +0100
device model: Allow the creation of symlinks on /sys/bus/*/devices
Allows the direct creation of symlinks on /sys/bus/*/devices. This is needed
for a compat symlink from gta01-pm-gps.0 to neo1973-pm-gps.0 on the Openmoko
Neo1973 GTA01.
Signed-off-by: Cesar Eduardo Barros <cesarb at cesarb.net>
commit ce9691ef86f0c367b9edca3b688525a1cf7510c1
Author: Andy Green <agreen at pads.home.warmcat.com>
Date: Sun Aug 3 22:35:51 2008 +0100
Signed-Off-Number: Holger Freyther <zecke at openmoko.org>
commit cba90f4bb9fc765be789e7d9e0f836ad4670c87f
Author: Andy Green <andy at openmoko.com>
Date: Wed Jul 30 14:37:17 2008 +0100
use-gta02-glamo-mci-sd-dynamic-clock.patch
This patch uses the new glamo-mci slow clock ratio
patch in order to dynamically reduce SD Card clock
rate when the GPS unit is powered on GTA02.
Signed-off-by: Andy Green <andy at openmoko.com>
commit 911b448d4b528c403f973f9e5aa34be94bffaf1e
Author: Andy Green <andy at openmoko.com>
Date: Wed Jul 30 14:37:01 2008 +0100
add-glamo-mci-slower-clocking-dynamic-switching.patch
This patch gives glamo-mci a concept of a platform-defined
dynamic clock slowing callback. It means that platform code
can associate some completely external state to decide if
we run the SD clock at normal rate or a rate divided by a
module parameter "sd_slow_ratio", which you can set on
kernel commandline like this:
glamo_mci.sd_slow_ratio=8
you can also change it at runtime by
echo 8 > /sys/module/glamo_mci/parameters/sd_slow_ratio
If no platform callback is defined, then no slow mode
is used. If it is defined, then the default division
action is / 8, eg, 16MHz normal -> 2MHz slow mode.
Signed-off-by: Andy Green <andy at openmoko.com>
commit 8ccb7946041773bb000a0c65cf30bd2392a5815f
Author: Andy Green <andy at openmoko.com>
Date: Wed Jul 30 14:36:50 2008 +0100
fix-glamo-mci-dont-filter-voltage-change.patch
Signed-off-by: Andy Green <andy at openmoko.com>
commit 0dd4b9a534db9bef8f2901c00ee58b00e14a49df
Author: Andy Green <andy at openmoko.com>
Date: Wed Jul 30 14:36:42 2008 +0100
fix-allow-full-sd-voltage-range-selection.patch
Until now we just drove the SD Card at 3.3V all the time. But in
fact we can do better, and use a voltage negotiated with the
SD Card itself.
With the shipping 512MB Sandisk SD Card, 2.7V is negotiated which
gives 1.7dBm reduction in power on all the SD Card lines and should
further reduce GPS perturbation during SD Card usage.
Signed-off-by: Andy Green <andy at openmoko.com>
More information about the commitlog
mailing list