r4027 - trunk/src/target/u-boot/patches
laforge at sita.openmoko.org
laforge at sita.openmoko.org
Fri Feb 8 10:28:20 CET 2008
Author: laforge
Date: 2008-02-08 10:28:19 +0100 (Fri, 08 Feb 2008)
New Revision: 4027
Removed:
trunk/src/target/u-boot/patches/uboot-arm920_s3c2410_irq_demux.patch
trunk/src/target/u-boot/patches/uboot-arm920t-gd_in_irq.patch
trunk/src/target/u-boot/patches/uboot-s3c2410-nand.patch
trunk/src/target/u-boot/patches/uboot-s3c24xx_multi_serial.patch
Modified:
trunk/src/target/u-boot/patches/series
Log:
four more patches have been merged mainline (great!)
Modified: trunk/src/target/u-boot/patches/series
===================================================================
--- trunk/src/target/u-boot/patches/series 2008-02-08 08:46:02 UTC (rev 4026)
+++ trunk/src/target/u-boot/patches/series 2008-02-08 09:28:19 UTC (rev 4027)
@@ -3,13 +3,9 @@
# those we want to get mainline
uboot-strtoul.patch
-uboot-arm920t-gd_in_irq.patch
-uboot-arm920_s3c2410_irq_demux.patch
-uboot-s3c2410-nand.patch
uboot-s3c24xx-nand-boot.patch
uboot-cmd_s3c2410.patch
uboot-s3c2410-mmc.patch
-uboot-s3c24xx_multi_serial.patch
env_nand_oob.patch
dynenv-harden.patch
uboot-s3c2410_fb.patch
Deleted: trunk/src/target/u-boot/patches/uboot-arm920_s3c2410_irq_demux.patch
===================================================================
--- trunk/src/target/u-boot/patches/uboot-arm920_s3c2410_irq_demux.patch 2008-02-08 08:46:02 UTC (rev 4026)
+++ trunk/src/target/u-boot/patches/uboot-arm920_s3c2410_irq_demux.patch 2008-02-08 09:28:19 UTC (rev 4027)
@@ -1,56 +0,0 @@
-This patch adds a IRQ demultiplexer callback to the arm920 cpu core code,
-plus a stub implementation of it for the S3C2410.
-
-Index: u-boot/cpu/arm920t/interrupts.c
-===================================================================
---- u-boot.orig/cpu/arm920t/interrupts.c
-+++ u-boot/cpu/arm920t/interrupts.c
-@@ -161,11 +161,16 @@
-
- void do_irq (struct pt_regs *pt_regs)
- {
--#if defined (CONFIG_USE_IRQ) && defined (CONFIG_ARCH_INTEGRATOR)
-+#if defined (CONFIG_USE_IRQ)
-+#if defined (ARM920_IRQ_CALLBACK)
-+ ARM920_IRQ_CALLBACK();
-+ return;
-+#elif defined (CONFIG_ARCH_INTEGRATOR)
- /* ASSUMED to be a timer interrupt */
- /* Just clear it - count handled in */
- /* integratorap.c */
- *(volatile ulong *)(CFG_TIMERBASE + 0x0C) = 0;
-+#endif /* ARCH_INTEGRATOR */
- #else
- printf ("interrupt request\n");
- show_regs (pt_regs);
-Index: u-boot/cpu/arm920t/s3c24x0/interrupts.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/interrupts.c
-+++ u-boot/cpu/arm920t/s3c24x0/interrupts.c
-@@ -216,4 +216,13 @@
- /*NOTREACHED*/
- }
-
-+#ifdef CONFIG_USE_IRQ
-+void s3c2410_irq(void)
-+{
-+ S3C24X0_INTERRUPT * irq = S3C24X0_GetBase_INTERRUPT();
-+ u_int32_t intpnd = irq->INTPND;
-+
-+}
-+#endif /* USE_IRQ */
-+
- #endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
-Index: u-boot/include/common.h
-===================================================================
---- u-boot.orig/include/common.h
-+++ u-boot/include/common.h
-@@ -480,6 +480,8 @@
- ulong get_PCI_freq (void);
- #endif
- #if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || defined(CONFIG_LH7A40X)
-+void s3c2410_irq(void);
-+#define ARM920_IRQ_CALLBACK s3c2410_irq
- ulong get_FCLK (void);
- ulong get_HCLK (void);
- ulong get_PCLK (void);
Deleted: trunk/src/target/u-boot/patches/uboot-arm920t-gd_in_irq.patch
===================================================================
--- trunk/src/target/u-boot/patches/uboot-arm920t-gd_in_irq.patch 2008-02-08 08:46:02 UTC (rev 4026)
+++ trunk/src/target/u-boot/patches/uboot-arm920t-gd_in_irq.patch 2008-02-08 09:28:19 UTC (rev 4027)
@@ -1,28 +0,0 @@
-This patch allows us to use the 'gd' pointer (and thus environment
-and everything else associated with it) from interrupt context on
-arm920t.
-
-Signed-off-by: Harald Welte <laforge at openmoko.org>
-
-Index: u-boot/cpu/arm920t/start.S
-===================================================================
---- u-boot.orig/cpu/arm920t/start.S
-+++ u-boot/cpu/arm920t/start.S
-@@ -415,12 +415,12 @@
- .macro irq_save_user_regs
- sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ Calling r0-r12
-- add r8, sp, #S_PC
-- stmdb r8, {sp, lr}^ @ Calling SP, LR
-- str lr, [r8, #0] @ Save calling PC
-+ add r7, sp, #S_PC
-+ stmdb r7, {sp, lr}^ @ Calling SP, LR
-+ str lr, [r7, #0] @ Save calling PC
- mrs r6, spsr
-- str r6, [r8, #4] @ Save CPSR
-- str r0, [r8, #8] @ Save OLD_R0
-+ str r6, [r7, #4] @ Save CPSR
-+ str r0, [r7, #8] @ Save OLD_R0
- mov r0, sp
- .endm
-
Deleted: trunk/src/target/u-boot/patches/uboot-s3c2410-nand.patch
===================================================================
--- trunk/src/target/u-boot/patches/uboot-s3c2410-nand.patch 2008-02-08 08:46:02 UTC (rev 4026)
+++ trunk/src/target/u-boot/patches/uboot-s3c2410-nand.patch 2008-02-08 09:28:19 UTC (rev 4027)
@@ -1,216 +0,0 @@
-This patch adds NAND support to the S3C24x0 SoC code in u-boot
-
-Signed-off-by: Harald Welte <laforge at openmoko.org>
-
-Index: u-boot/cpu/arm920t/s3c24x0/Makefile
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/Makefile
-+++ u-boot/cpu/arm920t/s3c24x0/Makefile
-@@ -26,7 +26,7 @@
- LIB = $(obj)lib$(SOC).a
-
- COBJS = i2c.o interrupts.o serial.o speed.o \
-- usb.o usb_ohci.o
-+ usb.o usb_ohci.o nand.o
-
- SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
- OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-Index: u-boot/cpu/arm920t/s3c24x0/nand.c
-===================================================================
---- /dev/null
-+++ u-boot/cpu/arm920t/s3c24x0/nand.c
-@@ -0,0 +1,183 @@
-+/*
-+ * (C) Copyright 2006 OpenMoko, Inc.
-+ * Author: Harald Welte <laforge at openmoko.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of
-+ * the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-+ * MA 02111-1307 USA
-+ */
-+
-+#include <common.h>
-+
-+#if 0
-+#define DEBUGN printf
-+#else
-+#define DEBUGN(x, args ...) {}
-+#endif
-+
-+#if defined(CONFIG_CMD_NAND)
-+#if !defined(CFG_NAND_LEGACY)
-+
-+#include <nand.h>
-+#include <s3c2410.h>
-+
-+#define __REGb(x) (*(volatile unsigned char *)(x))
-+#define __REGi(x) (*(volatile unsigned int *)(x))
-+
-+#define NF_BASE 0x4e000000
-+#define NFCONF __REGi(NF_BASE + 0x0)
-+#define NFCMD __REGb(NF_BASE + 0x4)
-+#define NFADDR __REGb(NF_BASE + 0x8)
-+#define NFDATA __REGb(NF_BASE + 0xc)
-+#define NFSTAT __REGb(NF_BASE + 0x10)
-+#define NFECC0 __REGb(NF_BASE + 0x14)
-+#define NFECC1 __REGb(NF_BASE + 0x15)
-+#define NFECC2 __REGb(NF_BASE + 0x16)
-+
-+#define S3C2410_NFCONF_EN (1<<15)
-+#define S3C2410_NFCONF_512BYTE (1<<14)
-+#define S3C2410_NFCONF_4STEP (1<<13)
-+#define S3C2410_NFCONF_INITECC (1<<12)
-+#define S3C2410_NFCONF_nFCE (1<<11)
-+#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
-+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
-+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
-+
-+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
-+{
-+ struct nand_chip *chip = mtd->priv;
-+
-+ DEBUGN("hwcontrol(): 0x%02x: ", cmd);
-+
-+ switch (cmd) {
-+ case NAND_CTL_SETNCE:
-+ NFCONF &= ~S3C2410_NFCONF_nFCE;
-+ DEBUGN("NFCONF=0x%08x\n", NFCONF);
-+ break;
-+ case NAND_CTL_CLRNCE:
-+ NFCONF |= S3C2410_NFCONF_nFCE;
-+ DEBUGN("NFCONF=0x%08x\n", NFCONF);
-+ break;
-+ case NAND_CTL_SETALE:
-+ chip->IO_ADDR_W = NF_BASE + 0x8;
-+ DEBUGN("SETALE\n");
-+ break;
-+ case NAND_CTL_SETCLE:
-+ chip->IO_ADDR_W = NF_BASE + 0x4;
-+ DEBUGN("SETCLE\n");
-+ break;
-+ default:
-+ chip->IO_ADDR_W = NF_BASE + 0xc;
-+ break;
-+ }
-+ return;
-+}
-+
-+static int s3c2410_dev_ready(struct mtd_info *mtd)
-+{
-+ DEBUGN("dev_ready\n");
-+ return (NFSTAT & 0x01);
-+}
-+
-+#ifdef CONFIG_S3C2410_NAND_HWECC
-+static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
-+{
-+ DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd ,mode);
-+ NFCONF |= S3C2410_NFCONF_INITECC;
-+}
-+
-+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
-+ u_char *ecc_code)
-+{
-+ ecc_code[0] = NFECC0;
-+ ecc_code[1] = NFECC1;
-+ ecc_code[2] = NFECC2;
-+ DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
-+ mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
-+
-+ return 0;
-+}
-+
-+static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
-+ u_char *read_ecc, u_char *calc_ecc)
-+{
-+ if (read_ecc[0] == calc_ecc[0] &&
-+ read_ecc[1] == calc_ecc[1] &&
-+ read_ecc[2] == calc_ecc[2])
-+ return 0;
-+
-+ printf("s3c2410_nand_correct_data: not implemented\n");
-+ return -1;
-+}
-+#endif
-+
-+
-+int board_nand_init(void) __attribute__((weak, alias("__board_nand_init")));
-+
-+
-+int __board_nand_init(struct nand_chip *nand)
-+{
-+ u_int32_t cfg;
-+ u_int8_t tacls, twrph0, twrph1;
-+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
-+
-+ DEBUGN("board_nand_init()\n");
-+
-+ clk_power->CLKCON |= (1 << 4);
-+
-+ /* initialize hardware */
-+ twrph0 = 3; twrph1 = 0; tacls = 0;
-+
-+ cfg = S3C2410_NFCONF_EN;
-+ cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
-+ cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
-+ cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
-+
-+ NFCONF = cfg;
-+
-+ /* initialize nand_chip data structure */
-+ nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
-+
-+ /* read_buf and write_buf are default */
-+ /* read_byte and write_byte are default */
-+
-+ /* hwcontrol always must be implemented */
-+ nand->hwcontrol = s3c2410_hwcontrol;
-+
-+ nand->dev_ready = s3c2410_dev_ready;
-+
-+#ifdef CONFIG_S3C2410_NAND_HWECC
-+ nand->enable_hwecc = s3c2410_nand_enable_hwecc;
-+ nand->calculate_ecc = s3c2410_nand_calculate_ecc;
-+ nand->correct_data = s3c2410_nand_correct_data;
-+ nand->eccmode = NAND_ECC_HW3_512;
-+#else
-+ nand->eccmode = NAND_ECC_SOFT;
-+#endif
-+
-+#ifdef CONFIG_S3C2410_NAND_BBT
-+ nand->options = NAND_USE_FLASH_BBT;
-+#else
-+ nand->options = 0;
-+#endif
-+
-+ DEBUGN("end of nand_init\n");
-+
-+ return 0;
-+}
-+
-+#else
-+ #error "U-Boot legacy NAND support not available for S3C2410"
-+#endif
-+#endif
-Index: u-boot/include/s3c24x0.h
-===================================================================
---- u-boot.orig/include/s3c24x0.h
-+++ u-boot/include/s3c24x0.h
-@@ -1132,4 +1132,6 @@
-
- #endif
-
-+int __board_nand_init(struct nand_chip *nand);
-+
- #endif /*__S3C24X0_H__*/
Deleted: trunk/src/target/u-boot/patches/uboot-s3c24xx_multi_serial.patch
===================================================================
--- trunk/src/target/u-boot/patches/uboot-s3c24xx_multi_serial.patch 2008-02-08 08:46:02 UTC (rev 4026)
+++ trunk/src/target/u-boot/patches/uboot-s3c24xx_multi_serial.patch 2008-02-08 09:28:19 UTC (rev 4027)
@@ -1,290 +0,0 @@
-Index: u-boot/common/serial.c
-===================================================================
---- u-boot.orig/common/serial.c
-+++ u-boot/common/serial.c
-@@ -59,6 +59,16 @@
- #else
- return &serial0_device;
- #endif
-+#elif defined(CONFIG_S3C2410)
-+#if defined(CONFIG_SERIAL1)
-+ return &s3c24xx_serial0_device;
-+#elif defined(CONFIG_SERIAL2)
-+ return &s3c24xx_serial1_device;
-+#elif defined(CONFIG_SERIAL3)
-+ return &s3c24xx_serial2_device;
-+#else
-+#error "CONFIG_SERIAL? missing."
-+#endif
- #else
- #error No default console
- #endif
-@@ -119,6 +129,11 @@
- #if defined (CONFIG_STUART)
- serial_register(&serial_stuart_device);
- #endif
-+#if defined(CONFIG_S3C2410)
-+ serial_register(&s3c24xx_serial0_device);
-+ serial_register(&s3c24xx_serial1_device);
-+ serial_register(&s3c24xx_serial2_device);
-+#endif
- serial_assign (default_serial_console ()->name);
- }
-
-Index: u-boot/cpu/arm920t/s3c24x0/serial.c
-===================================================================
---- u-boot.orig/cpu/arm920t/s3c24x0/serial.c
-+++ u-boot/cpu/arm920t/s3c24x0/serial.c
-@@ -48,18 +48,74 @@
- #error "Bad: you didn't configure serial ..."
- #endif
-
--void serial_setbrg (void)
-+#if defined(CONFIG_SERIAL_MULTI)
-+#include <serial.h>
-+
-+/* Multi serial device functions */
-+#define DECLARE_S3C_SERIAL_FUNCTIONS(port) \
-+ int s3serial##port##_init (void) {\
-+ return serial_init_dev(port);}\
-+ void s3serial##port##_setbrg (void) {\
-+ serial_setbrg_dev(port);}\
-+ int s3serial##port##_getc (void) {\
-+ return serial_getc_dev(port);}\
-+ int s3serial##port##_tstc (void) {\
-+ return serial_tstc_dev(port);}\
-+ void s3serial##port##_putc (const char c) {\
-+ serial_putc_dev(port, c);}\
-+ void s3serial##port##_puts (const char *s) {\
-+ serial_puts_dev(port, s);}
-+
-+#define INIT_S3C_SERIAL_STRUCTURE(port,name,bus) {\
-+ name,\
-+ bus,\
-+ s3serial##port##_init,\
-+ s3serial##port##_setbrg,\
-+ s3serial##port##_getc,\
-+ s3serial##port##_tstc,\
-+ s3serial##port##_putc,\
-+ s3serial##port##_puts, }
-+
-+#endif /* CONFIG_SERIAL_MULTI */
-+
-+void _serial_setbrg(const int dev_index)
- {
-- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
-- int i;
-+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
- unsigned int reg = 0;
-+ int i;
-
- /* value is calculated so : (int)(PCLK/16./baudrate) -1 */
- reg = get_PCLK() / (16 * gd->baudrate) - 1;
-
-+ uart->UBRDIV = reg;
-+ for (i = 0; i < 100; i++);
-+}
-+#if defined(CONFIG_SERIAL_MULTI)
-+static inline void
-+serial_setbrg_dev(unsigned int dev_index)
-+{
-+ _serial_setbrg(dev_index);
-+}
-+#else
-+void serial_setbrg(void)
-+{
-+ _serial_setbrg(UART_NR);
-+}
-+#endif
-+
-+
-+/* Initialise the serial port. The settings are always 8 data bits, no parity,
-+ * 1 stop bit, no start bits.
-+ */
-+static int serial_init_dev(const int dev_index)
-+{
-+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
-+ int i;
-+
- /* FIFO enable, Tx/Rx FIFO clear */
- uart->UFCON = 0x07;
- uart->UMCON = 0x0;
-+
- /* Normal,No parity,1 stop,8 bit */
- uart->ULCON = 0x3;
- /*
-@@ -67,40 +123,57 @@
- * normal,interrupt or polling
- */
- uart->UCON = 0x245;
-- uart->UBRDIV = reg;
-
- #ifdef CONFIG_HWFLOW
- uart->UMCON = 0x1; /* RTS up */
- #endif
-- for (i = 0; i < 100; i++);
-+
-+ /* FIXME: This is sooooooooooooooooooo ugly */
-+#if defined(CONFIG_ARCH_GTA02_v1) || defined(CONFIG_ARCH_GTA02_v2)
-+ /* we need auto hw flow control on the gsm and gps port */
-+ if (dev_index == 0 || dev_index == 1)
-+ uart->UMCON = 0x10;
-+#endif
-+ _serial_setbrg(dev_index);
-+
-+ return (0);
- }
-
--/*
-- * Initialise the serial port with the given baudrate. The settings
-- * are always 8 data bits, no parity, 1 stop bit, no start bits.
-- *
-+#if !defined(CONFIG_SERIAL_MULTI)
-+/* Initialise the serial port. The settings are always 8 data bits, no parity,
-+ * 1 stop bit, no start bits.
- */
- int serial_init (void)
- {
-- serial_setbrg ();
--
-- return (0);
-+ return serial_init_dev(UART_NR);
- }
-+#endif
-
- /*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
--int serial_getc (void)
-+int _serial_getc (const int dev_index)
- {
-- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
-+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
-
- /* wait for character to arrive */
- while (!(uart->UTRSTAT & 0x1));
-
- return uart->URXH & 0xff;
- }
-+#if defined(CONFIG_SERIAL_MULTI)
-+static inline int serial_getc_dev(unsigned int dev_index)
-+{
-+ return _serial_getc(dev_index);
-+}
-+#else
-+int serial_getc (void)
-+{
-+ return _serial_getc(UART_NR);
-+}
-+#endif
-
- #ifdef CONFIG_HWFLOW
- static int hwflow = 0; /* turned off by default */
-@@ -138,9 +211,9 @@
- /*
- * Output a single byte to the serial port.
- */
--void serial_putc (const char c)
-+void _serial_putc (const char c, const int dev_index)
- {
-- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
-+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
- #ifdef CONFIG_MODEM_SUPPORT
- if (be_quiet)
- return;
-@@ -161,23 +234,72 @@
- if (c == '\n')
- serial_putc ('\r');
- }
-+#if defined(CONFIG_SERIAL_MULTI)
-+static inline void serial_putc_dev(unsigned int dev_index, const char c)
-+{
-+ _serial_putc(c, dev_index);
-+}
-+#else
-+void serial_putc(const char c)
-+{
-+ _serial_putc(c, UART_NR);
-+}
-+#endif
-+
-
- /*
- * Test whether a character is in the RX buffer
- */
--int serial_tstc (void)
-+int _serial_tstc(const int dev_index)
- {
-- S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR);
-+ S3C24X0_UART * const uart = S3C24X0_GetBase_UART(dev_index);
-
- return uart->UTRSTAT & 0x1;
- }
-+#if defined(CONFIG_SERIAL_MULTI)
-+static inline int
-+serial_tstc_dev(unsigned int dev_index)
-+{
-+ return _serial_tstc(dev_index);
-+}
-+#else
-+int serial_tstc(void)
-+{
-+ return _serial_tstc(UART_NR);
-+}
-+#endif
-
--void
--serial_puts (const char *s)
-+void _serial_puts(const char *s, const int dev_index)
- {
- while (*s) {
-- serial_putc (*s++);
-+ _serial_putc (*s++, dev_index);
- }
- }
-+#if defined(CONFIG_SERIAL_MULTI)
-+static inline void
-+serial_puts_dev(int dev_index, const char *s)
-+{
-+ _serial_puts(s, dev_index);
-+}
-+#else
-+void
-+serial_puts (const char *s)
-+{
-+ _serial_puts(s, UART_NR);
-+}
-+#endif
-+
-+#if defined(CONFIG_SERIAL_MULTI)
-+DECLARE_S3C_SERIAL_FUNCTIONS(0);
-+struct serial_device s3c24xx_serial0_device =
-+ INIT_S3C_SERIAL_STRUCTURE(0, "s3ser0", "S3UART1");
-+DECLARE_S3C_SERIAL_FUNCTIONS(1);
-+struct serial_device s3c24xx_serial1_device =
-+ INIT_S3C_SERIAL_STRUCTURE(1, "s3ser1", "S3UART2");
-+DECLARE_S3C_SERIAL_FUNCTIONS(2);
-+struct serial_device s3c24xx_serial2_device =
-+ INIT_S3C_SERIAL_STRUCTURE(2, "s3ser2", "S3UART3");
-+
-+#endif /* CONFIG_SERIAL_MULTI */
-
- #endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
-Index: u-boot/include/serial.h
-===================================================================
---- u-boot.orig/include/serial.h
-+++ u-boot/include/serial.h
-@@ -35,6 +35,11 @@
-
- #endif
-
-+#if defined(CONFIG_S3C2410)
-+extern struct serial_device s3c24xx_serial0_device;
-+extern struct serial_device s3c24xx_serial1_device;
-+extern struct serial_device s3c24xx_serial2_device;
-+#endif
-
- extern struct serial_device serial_ffuart_device;
- extern struct serial_device serial_btuart_device;
More information about the commitlog
mailing list