development kernel tree: Changes to 'andy'

[git at git.openmoko.org]

Rebased ref, commits from common ancestor:
commit 55915db3fcde3daf245a89317a09b1b8075ff074
Author: Matt <matt_hsu at openmoko.org>
Date:   Fri Jun 27 09:28:34 2008 +0100

    add-ar6k-wake-interrupt.patch
    
    Signed-off-by: Matt Hsu <matt_hsu at openmoko.org>
    
    - add an interrupt for ar6k wifi module

commit a2b2c0c3a8f2298c712de594d88baa2d28e28d32
Author: Andy Green <andy at openmoko.com>
Date:   Wed Jun 25 22:07:24 2008 +0100

    test-touchscreen-median.patch
    
    Signed-off-by: Andy Green <andy at openmoko.com>

commit 3f32fdc2b7cb777e782838c5b7999c98d9b0685f
Author: Mike Westerhof <mwester at dls.net>
Date:   Sun Jun 22 19:33:01 2008 +0100

    clean-gsm-flow-control.patch
    
    Signed-off-by: Mike Westerhof <mwester at dls.net>
    
     arch/arm/plat-s3c24xx/neo1973_pm_gsm.c |   52 +-------
     drivers/serial/s3c2410.c               |  204 +++-----------------------------
     2 files changed, 24 insertions(+), 232 deletions(-)

commit 02f24cd44fb61c4ca58d93ddfcfdcc2eb334fa78
Author: Andy Green <andy at openmoko.com>
Date:   Sun Jun 22 19:32:18 2008 +0100

    fix-gsm-resume-problems.patch
    
    Signed-off-by: Andy Green <andy at openmoko.com>

commit 6e5a03f85a9b701896f1bd603ac51de8bf8158c5
Author: Andy Green <andy at openmoko.com>
Date:   Sun Jun 22 10:09:54 2008 +0100

    fix-lis302dl-resume-and-init-reload-boot-coefficients.patch
    Reported-by: John Lee <john_lee at openmoko.com>
    
    We don't reset the devices either at init or resume, where init
    means use the BOOT bit to reload device calibration coefficients
    from internal EEPROM.  John Lee saw brain-damaged behaviour after
    resume and sometimes after boot (since it may not have lost power
    to force a BOOT itself that makes sense).
    
    This patch
    
     - adds a diagnostic dump feature down /sys
     - forces BOOT action on init and resume, and waits for
       completion
     - makes sure XYZ capture is enabled on resume
     - adds some constants in the .h and removes some magic numbers
       in the code by using them
    
    Signed-off-by: Andy Green <andy at openmoko.com>