Using Qemu

[Jimmy McMillan]

Matthew,

  Like I said, I had the same problem you are for about a week and 
finally rebuilt everything as mentioned on the wiki.  Here is my screeny 
as well as my `history`.

http://www.freshstation.org/~mintee/openmoko.jpg

Hope that helps

Mathew Davis wrote:
>  
>  
> Dang reply button well I accidentally sent this just to Jmmy
>  
> I was trying to avoid re-flashing and re-building because it takes so 
> long to re-start.  So I tried the clicking about a million times, but 
> no luck so I am trying make download-images and am currently waiting 
> for the qemu environment to startup again.  If that doesn't work I 
> will try restarting the ubuntu environment.  Thanks for the help guys.
>  
> UpDate:
> I have rebooted the VM still no luck,  So I thought maybe it was the 
> VM on linux so I moved it over to an XP box still no go.  I tried the 
> make download-images and got this
> [ -e images/openmoko ] || mkdir -p images/openmoko
> ln -sf `pwd`/openmoko/trunk/src/host/qemu-neo1973/openmoko/env 
> images/openmoko/env
> ( cd images ; 
> ../openmoko/trunk/src/host/qemu-neo1973/openmoko/download.sh )
>     Retrieving available builds list...
>     Kernel is... uImage-2.6-moko10-r2_0_2134_0-fic-gta01.bin
>     Root filesystem is... 
> openmoko-devel-image-fic-gta01-20070803091138.rootfs.jffs2
>     U-boot is... u-boot-gta01bv4-r12_0_2632_0.bin
>
>     Now use openmoko/flash.sh to install OpenMoko to NAND Flash.
>
> rm -f images/openmoko/env
> [ -d stamps ] || mkdir stamps
> touch stamps/images
>
>  Now I don't know how to use openmoko/flash.sh so i just ran Make 
> setup then when that was finished I ran Make run-qemu still no good 
> what can I do.
> On 8/14/07, *Mathew Davis* <someoneinjapan at gmail.com 
> <mailto:someoneinjapan at gmail.com>> wrote:
>
>     I was trying to avoid re-flashing and re-building because it takes
>     so long to re-start.  So I tried the clicking about a million
>     times, but no luck so I am trying make download-images and am
>     currently waiting for the qemu environment to startup again.  If
>     that doesn't work I will try restarting the ubuntu environment. 
>     Thanks for the help guys.
>      
>     Matt
>
>      
>     On 8/14/07, *Jimmy McMillan* <jimmy at freshstation.org
>     <mailto:jimmy at freshstation.org>> wrote:
>
>         Mathew Davis wrote:
>         > I don't know if this is the right place to ask this or not, I
>         didn't
>         > think it was a development question more of a general use
>         question.  I
>         > got the Openmoko_Dev VM and I ran through the makefile setup
>         and got
>         > qemu up and running by typing make run-qemu, it took forever
>         but it
>         > finally booted up into the gui.  I am at the point where it
>         is asking
>         > me to calibrate the screen by clicking the crosshair, but I can't
>         > click it.  Is there something I missed.  I am completly new
>         to Qemu
>         > and fairly new to linux although I have some experiance with
>         it.  So
>         > is the a conf file I need to edit to get the mouse calibrated
>         I have
>         > the mouse inside the emulated window but it just won't let me
>         click.
>         > Any help here would be great.  If it's on the wiki I must
>         have missed
>         > it so you can send me the link if you like.
>         >
>         > Thanks,
>         > Matt
>         > ------------------------------------------------------------------------
>
>         >
>         > _______________________________________________
>         > OpenMoko community mailing list
>         > community at lists.openmoko.org
>         <mailto:community at lists.openmoko.org>
>         > http://lists.openmoko.org/mailman/listinfo/community
>         <http://lists.openmoko.org/mailman/listinfo/community>
>         >
>         > ------------------------------------------------------------------------
>         >
>         >
>
>
>         Matthew.  I was having the same problems for a while, but I
>         found that
>         after I restarted the ubuntu VM, and started the qemu string
>         (after it
>         was build) it worked fine for me.  You make also wanna do
>         another svn
>         fetch and start from scratch.
>
>         *Have you tried turning it off and on*
>
>         Jimmy
>
>         _______________________________________________
>         OpenMoko community mailing list
>         community at lists.openmoko.org <mailto:community at lists.openmoko.org>
>         http://lists.openmoko.org/mailman/listinfo/community
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> OpenMoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>   
> ------------------------------------------------------------------------
>
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition. 
> Version: 7.5.476 / Virus Database: 269.10.22/922 - Release Date: 7/27/2007 6:08 AM
>