iknowjoseph at gmail.com
Wed Dec 5 13:59:02 CET 2007
Thanks for your reply. Sorry, I should have said that I had chmod'd it
to begin with.
joseph at joseph-work:~/DFU$ ls -l dfu-util
-rwxr-xr-x 1 joseph joseph 706018 2007-12-05 12:04 dfu-util
On 05/12/2007, Andrew Loughran <andy at zrmt.com> wrote:
> Joseph Reeves wrote:
> > Hello all,
> > Probably a the most noob question you're going to get for a while, but
> > I'm a bit stuck... I wanted to flash the latest Qtopia build but have
> > come unstuck at the first hurdle.
> > Running Kubuntu 7.10 and downloaded dfu-util from here:
> > http://downloads.openmoko.org/snapshots/2007.11/images/
> > I have apt-get'd the dependencies and updated etc/fstab as per here:
> > http://wiki.openmoko.org/wiki/Dfu-util
> > But the this is as good as I can get out of it:
> > joseph at joseph-work:~/DFU$ sudo ./dfu-util -a kernel -R -D ./uImage-18.104.22.168-moko
> > 11+svnr3238-r7-neo1973.bin
> > ./dfu-util: ./dfu-util: cannot execute binary file
> > Any help getting this to work would be massively appreciated!
> > Thanks, Joseph
> > _______________________________________________
> > OpenMoko community mailing list
> > community at lists.openmoko.org
> > http://lists.openmoko.org/mailman/listinfo/community
> "sudo chmod a+x dfu-util" I guess would be a solution.
> check the perms with a ls -l dfu-util and make sure you can execute it.
> OpenMoko community mailing list
> community at lists.openmoko.org
More information about the community