qtopia flash image update

[Heilpern, Mark]

I'm seeing the same problems with the new Qtopia image. The device comes
up locked (with no apparent way to unlock it) -- the touch screen
controls flash so I know they're registering, but the screen doesn't go
to the unlock screen. The bottom left "soft menu" is "unlock", but
touching the screen there doesn't register at all.

Holding in the power button for a moment provides the restart/shutdown
menu. Selecting "shutdown device" puts the clock icon on screen but
doesn't go beyond that. Instead, it appears that the phone has crashed
hard; only removal of the battery gets results from here. 

-----Original Message-----
From: community-bounces at lists.openmoko.org
[mailto:community-bounces at lists.openmoko.org] On Behalf Of andy selby
Sent: Tuesday, October 02, 2007 12:42 PM
To: List for OpenMoko community discussion
Subject: Re: qtopia flash image update

On 02/10/2007, Lorn Potter <lpotter at trolltech.com> wrote:
> I have uploaded a Qtopia snapshot version flash image for the Neo.

> a few Known issues:
>
> * suspend/resume not fully working. must restart Qtopia to get modem
working
> again.
> * inputmethod covers some widgets (bluetooth settings)
> * no modem mux (no gprs)
> * no mms support (no wap stack integrated)
> * bluetooth audio not tested on Neo yet, probably needs work.

Err.. how about the software is locked as default and shutdown the
device doesn't work?
but I'm sure the rest of the software is good, keep up the good work.

_______________________________________________
OpenMoko community mailing list
community at lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community

NOTE: The information in this message is intended for the personal and confidential use
of the designated recipient(s) named above. To the extent the recipient(s) is/are bound
by a non-disclosure agreement, or other agreement that contains an obligation of
confidentiality, with AuthenTec, then this message and/or any attachments shall be
considered confidential information and subject to the confidentiality terms of that
agreement.  If the reader of this message is not the intended recipient named above, you
are notified that you have received this document in error, and any review, dissemination,
distribution or copying of this message is strictly prohibited. If you have received this
document in error, please delete the original message and notify the sender immediately.
Thank you.

AuthenTec, Inc.  http://www.authentec.com