Car charger to GTA02
"Marco Trevisan (Treviño)"
mail at 3v1n0.net
Wed Apr 2 01:33:33 CEST 2008
Michael Shiloh ha scritto:
> A generic solution can be built this way:
> 1. Locate a generic USB car charger e.g.
> http://www.daydeal.com/product.php?productid=10892. Make sure it can
> supply at least 1A. Note in my example that the specs don't say this,
> but if you look at the picture carefully you can read the 1A on the
> label. They are very common. I think I found one for less than $2.00.
> 2. Purchase a standard USB A to Mini B cable,e.g.
> These too are common. I have about 4 left over from digital cameras. You
> can probably get them for free by asking your friends and relatives.
> 3. Carefully slice open the cable and solder in the appropriate resistor
> between the appropriate conductors (someone needs to document this)
Why not simply connecting the official Openmoko usb cable to the car usb
Will it need the mod you've figured at the point 3?
Treviño's World - Life and Linux
More information about the community