Alpha 2 Release of Accelerometer-based Gestures, and Screen Orientation
Christian Anke
carcinoma at gmx.net
Fri Aug 15 13:58:18 CEST 2008
Am Freitag 15 August 2008 13:37:56 schrieb Andy Green:
> Somebody in the thread at some point said:
> | Timo Jyrinki schrieb:
> |> 2008/8/15 Christian Anke <carcinoma at gmx.net>:
> |>> what is with this? the top accelerometer does not work!
> |>> Also after restarting the neo.
> |>>
> |>> can this be a hardware fault?
> |>
> |> Same problem here. The earlier version of gestures worked for me once,
> |> but didn't work later on. hexdumping event3 seems to show data, but
> |> currently nothing from event2 despite reboots.
> |>
> |> Probably something for the Openmoko hw/driver team to investigate again.
> |>
> |> -Timo
> |>
> |> _______________________________________________
> |> Openmoko community mailing list
> |> community at lists.openmoko.org
> |> http://lists.openmoko.org/mailman/listinfo/community
> |
> | I don't get any data out of event2 and event3. Even if i kill neod, I
> | get no data. But I wonder why Eightball ran some days ago. Now it
> | doesnt run either. As you could probably see, I am runnung 2007.2 Image.
>
> what does
>
> cat /proc/interrupts
>
> say?
>
said:
root at om-gta02:~# cat /proc/interrupts
CPU0
16: 1821 s3c-ext0 lis302dl
17: 2 s3c-ext0 modem
30: 3233593 s3c S3C2410 Timer Tick
33: 21 s3c s3c24xx_hcd
35: 754557 s3c I2S PCM Stereo out
37: 222 s3c S3c24xx SDIO host controller
41: 42434 s3c s3c2410_udc
42: 0 s3c ohci_hcd:usb1
43: 14947 s3c s3c2440-i2c
48: 1 s3c-ext Neo1973 Headphone Jack
49: 1 s3c-ext ar6000
50: 7 s3c-ext Neo1973 AUX button
51: 1 s3c-ext Neo1973 HOLD button
53: 58 s3c-ext pcf50633
60: 199660 s3c-ext lis302dl
76: 0 s3c-uart2 s3c2440-uart
77: 20 s3c-uart2 s3c2440-uart
79: 684 s3c-adc s3c2410_action
80: 430221 s3c-adc s3c2410_action
Err: 0
root at om-gta02:~#
Carci
> -Andy
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
More information about the community
mailing list