Qi bootloader not working afther flash?

jos jos at snepscheut.nl
Tue Dec 16 00:45:21 CET 2008


Hello,

Being new here I have to say sorry for my English!

My question is:

I have been trying to flash the bootloader on my new FR, this is what I
did:

debian:/home/jos/neo# ./dfu-util -a u-boot -R -D
qi-s3c2442-master_2ad3ce6ff57753e3.udfu
dfu-util - (C) 2007 by OpenMoko Inc.
This program is Free Software and has ABSOLUTELY NO WARRANTY

Opening USB Device 0x0000:0x0000...
Claiming USB DFU Runtime Interface...
Determining device status: state = appIDLE, status = 0
Device really in Runtime Mode, send DFU detach request...
Resetting USB...
Opening USB Device...
Found Runtime: [0x1d50:0x5119] devnum=34, cfg=0, intf=0, alt=1,
name="u-boot"
Claiming USB DFU Interface...
Setting Alternate Setting ...
Determining device status: state = dfuIDLE, status = 0
dfuIDLE, continuing
Transfer Size = 0x1000
bytes_per_hash=540
Starting download: [##################################################]
finished!
state(2) = dfuIDLE, status(0) = No error condition is present
Done!
Resetting USB to switch back to runtime mode
debian:/home/jos/neo# 

Looks good !?

After power down (battery taken out) restarting with aux and power
button I get the same screen with menu as before, is this correct?
How can I see that Qi now is beeing used (and not uboot?)

Thanks and greetings,

Jos vd Snepscheut





More information about the community mailing list