Qi bootloader not working afther flash?

Juergen Schinker ba1020 at homie.homelinux.net
Tue Dec 16 11:46:38 CET 2008


jos wrote:
> Hello,
> 
> Being new here I have to say sorry for my English!
> 
> My question is:
> 
> I have been trying to flash the bootloader on my new FR, this is what I
> did:
> 
> debian:/home/jos/neo# ./dfu-util -a u-boot -R -D
> qi-s3c2442-master_2ad3ce6ff57753e3.udfu
> dfu-util - (C) 2007 by OpenMoko Inc.
> This program is Free Software and has ABSOLUTELY NO WARRANTY
> 
> Opening USB Device 0x0000:0x0000...
> Claiming USB DFU Runtime Interface...
> Determining device status: state = appIDLE, status = 0
> Device really in Runtime Mode, send DFU detach request...
> Resetting USB...
> Opening USB Device...
> Found Runtime: [0x1d50:0x5119] devnum=34, cfg=0, intf=0, alt=1,
> name="u-boot"
> Claiming USB DFU Interface...
> Setting Alternate Setting ...
> Determining device status: state = dfuIDLE, status = 0
> dfuIDLE, continuing
> Transfer Size = 0x1000
> bytes_per_hash=540
> Starting download: [##################################################]
> finished!
> state(2) = dfuIDLE, status(0) = No error condition is present
> Done!
> Resetting USB to switch back to runtime mode
> debian:/home/jos/neo# 
> 
> Looks good !?
> 
> After power down (battery taken out) restarting with aux and power
> button I get the same screen with menu as before, is this correct?
> How can I see that Qi now is beeing used (and not uboot?)

i flashed exactly the same bootloader and it works fine (faster)

when you want to flash press aux and power on (bahviour is as before)

RTFM

J




More information about the community mailing list