Bluetooth headset GUI configuration
Carl Lobo
carllobo at gmail.com
Sun Dec 21 12:59:07 CET 2008
You can try to run the command
passkey-agent --default <pin>
in another ssh console before the dbus-send command.
I managed to create a bonding but no sound on my Jawbone 2 with either
the Btcpu or gsm_headset.txt files found in the wiki. It shows me that
it's playing in the logs.
On Sat, Dec 20, 2008 at 3:45 PM, Simon Kagstrom
<simon.kagstrom at gmail.com> wrote:
> On Fri, 19 Dec 2008 20:54:36 +0000
> Al Johnson <openmoko at mazikeen.demon.co.uk> wrote:
>
>> > root at om-gta02:~# dbus-send --system --print-reply --dest=org.bluez
>> > /org/bluez org.bluez.Manager.ActivateService string:audio Error
>> > org.bluez.Error.NoSuchService: No such service
>> >
>> > it seems like bluez-utils have been compiled without --enable-audio.
>> > Could this be the problem?
>>
>> Do you have bluez-audio or bluez-utils-alsa installed? They aren't in
>> FSO by default.
>
> Right, that's it. I did
>
> opkg install bluez-audio
> opkg install bluez-utils
> /etc/init.d/bluetooth stop
> /etc/init.d/bluetooth start
>
> and now the audio service is there. However, I still can't get the
> connection to actually work. I've tried to pair with my computer:
>
> dbus-send --system --type=method_call --print-reply --dest=org.bluez /org/bluez/hci0 org.bluez.Adapter.CreateBonding string:<mac>
>
> but all I get is
>
> Error org.bluez.Error.AuthenticationRejected: Authentication Rejected
>
> With FSO I also get some kernel problems (2.6.24) when releasing the reset:
>
> usb 1-1: new full speed USB device using s3c2410-ohci and address 3
> usb 1-1: configuration #1 chosen from 1 choice
> sysfs: duplicate filename 'hci_usb' can not be created
> WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> [<c002ebec>] (dump_stack+0x0/0x14) from [<c00d7abc>] (sysfs_add_one+0x50/0xfc)
> [<c00d7a6c>] (sysfs_add_one+0x0/0xfc) from [<c00d81b8>] (create_dir+0x58/0xa8)
> r6:fffffff4 r5:c7085e48 r4:c7f1cab4
> [<c00d8160>] (create_dir+0x0/0xa8) from [<c00d8248>] (sysfs_create_dir+0x40/0x60)
> r8:00000008 r7:bf001e6c r6:bf003568 r5:bf003520 r4:bf003568
> [<c00d8208>] (sysfs_create_dir+0x0/0x60) from [<c0165aec>] (kobject_add+0xf4/0x1d0)
> r4:bf003568
> [<c01659f8>] (kobject_add+0x0/0x1d0) from [<c00697e4>] (mod_sysfs_setup+0x28/0xb4)
> [<c00697bc>] (mod_sysfs_setup+0x0/0xb4) from [<c006aa04>] (sys_init_module+0xf90/0x14bc)
> r8:c886ca04 r7:c886cbbc r6:bf003520 r5:00000000 r4:bf001e6c
> [<c0069a74>] (sys_init_module+0x0/0x14bc) from [<c0029f40>] (ret_fast_syscall+0x0/0x2c)
> kobject_add failed for hci_usb with -EEXIST, don't try to register things with the same name in the same directory.
> [<c002ebec>] (dump_stack+0x0/0x14) from [<c0165b7c>] (kobject_add+0x184/0x1d0)
> [<c01659f8>] (kobject_add+0x0/0x1d0) from [<c00697e4>] (mod_sysfs_setup+0x28/0xb4)
> [<c00697bc>] (mod_sysfs_setup+0x0/0xb4) from [<c006aa04>] (sys_init_module+0xf90/0x14bc)
> r8:c886ca04 r7:c886cbbc r6:bf003520 r5:00000000 r4:bf001e6c
> [<c0069a74>] (sys_init_module+0x0/0x14bc) from [<c0029f40>] (ret_fast_syscall+0x0/0x2c)
> sysfs: duplicate filename 'hci_usb' can not be created
> WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> [<c002ebec>] (dump_stack+0x0/0x14) from [<c00d7abc>] (sysfs_add_one+0x50/0xfc)
> [<c00d7a6c>] (sysfs_add_one+0x0/0xfc) from [<c00d81b8>] (create_dir+0x58/0xa8)
> r6:fffffff4 r5:c7e9fe48 r4:c7f1cab4
> [<c00d8160>]
>
> so no luck so far.
>
> // Simon
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
More information about the community
mailing list