how to enable usb host mode?

[Phani Kumar Kancharala]

Can any one suggest me how to use usb host mode with GTA01.

On Feb 6, 2008 11:38 AM, Phani Kumar Kancharala <
kancharlaphanikumar at gmail.com> wrote:

> yes, my plan is to work with a self powered USB hub. Is it possible to
> work with 2.6.22 kernel??
>
>
> On Feb 5, 2008 10:26 PM, Christopher Earl <earlc8451 at clarkstate.edu>
> wrote:
>
> > Add a powered Hub, and there you go, also somewhere on the Wiki is how
> > to Mod the GTA01 to add Bus power
> >
> > >>> Mikko J Rauhala <mjrauhal at cc.helsinki.fi> 02/05/08 11:21 AM >>>
> > On ti, 2008-02-05 at 16:01 +0000, JW wrote:
> > > if you are talking about GTA01 then there is no host mode (I believe).
> >
> > Bzzt, there is, though it is unpowered (and therefore nonstandard
> > as-is), requiring power to be fed from the side via eg. a three-pronged
> > cable (or the device not to care about seeing power on the bus, which
> > might be rare).
> >
> > --
> > Mikko J Rauhala <mjrauhal at cc.helsinki.fi>
> > University of Helsinki
> >
> >
> > _______________________________________________
> > OpenMoko community mailing list
> > community at lists.openmoko.org
> > http://lists.openmoko.org/mailman/listinfo/community
> >
> >
> > _______________________________________________
> > OpenMoko community mailing list
> > community at lists.openmoko.org
> > http://lists.openmoko.org/mailman/listinfo/community
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20080208/0e2f05d1/attachment.htm