NO VOICE WHEN USING VOIP IN QTOPIA

[Nick Guenther]

On 1/17/08, Mikael Lammentausta <mikael.lammentausta at gmail.com> wrote:
>
>  2008/1/16, 左 国坤 <george at nix.vision-funai.com>:
> > Hi, Lorn,
> >
> > I have tried
> > alsactl -f /etc/alsa/capturehandset.state restore
> > but no any improvement.
> >
> > can you please tell me when you release your improved snapshot?
> >
> > Regards.
> >
> > George
> >
> > > ----- Original Message -----
> > > 件名: RE: NO VOICE WHEN USING VOIP IN QTOPIA
> > > From: LORN POTTER <lpotter at trolltech.com>
> > > To: george at nix.vision-funai.com ,"LIST FOR OPENMOKO COMMUNITY
> DISCUSSION"
> > <community at lists.openmoko.org>
> > > 日付: 15-01-2008 10:39 am
> > >
> > >
> > > 左 国坤 wrote:
> > > > Hi, all
> > > >
> > > > I am using VOIP by compile Qtopia 4.3.1 Open source for Neo1973
> Phase1.
> > > > I need your help to clear some problems.
> > > >
> > > > 1, Incoming call
> > > >  ringtone OK, Answer OK, Hold OK, But No VOICE from Caller, and vice
> > versa.
> > > >
> > > > 2, Out Call
> > > >  Keeping with 'Dialing' status, NO Call Tone, No connection to the
> other
> > > > end
> > > >
> > > > I am a newbie in using Qtopia, maybe something missed in setting when
> > > > building.
> > >
> > > Nope. something is missing from Qtopia :)
> > > We are currently working on this, I think I will post a new snapshot
> > > image when voip is working.
> > >
> > > You man manually run alsactl -f /etc/alsa/capturehandset.state restore
> > > and try that.
> > >
>
> You can also try this:
>
>
> mount the qtopia image, insert this into /etc/init.d/qpe on line 64: alsactl
> -f /etc/gsmhandset.state restore
>
>
>
> Save the image to a jffs2 file and re-flash the device.
>
> I've no idea how this differs from the instructions you had earlier, but I
> don't think it hurts either. Worked for me.


It's probably a timing issue tied to when the GSM chip is powered up.

-Nick