[qtopia on freerunner] - What is the right place to discuss Qtopia on Openmoko?
Lorn Potter
lpotter at trolltech.com
Sat Jul 12 23:22:36 CEST 2008
Randy S. wrote:
> I should clarify: After the change, a boot would end up showing the UI
> momentarily (a few seconds) then the black screen.
that might be because it is suspending. If it is stil lplugged in, it
still thinks its on battery as apm is borked
>
>
> On Sat, Jul 12, 2008 at 3:04 PM, Randy S. <randypower at gmail.com
> <mailto:randypower at gmail.com>> wrote:
>
> Lorn, since making this change, I have not been able to boot the
> device successfully into Qtopia again.
>
>
>
>
> On Fri, Jul 11, 2008 at 4:12 PM, Lorn Potter <lpotter at trolltech.com
> <mailto:lpotter at trolltech.com>> wrote:
>
> Randy S. wrote:
> > Great! Here's what I've got.
> > 1. Often, a startup seems to fail. This always happens when I
> use NAND
> > u-Boot (a 7-10-2008 version), but usually is OK with u-Boot
> from NOR (I
> > think it's a May 2008 version).
> Try this:
> Quickfix is to ssh into device, edit /etc/init.d/qpe and remove
> the lines:
> -#crappy workaround for some weird suspend bug
> -rm /dev/ttySAC0
> -mknod /dev/ttySAC0 c 204 64 -m 660
> -chgrp dialout /dev/ttySAC0
> -
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
--
Lorn 'ljp' Potter
Software Engineer, Systems Group, Trolltech, a Nokia company
More information about the community
mailing list