Proper opkg config?

[arne anka]

hm, i tried
modprobe bluetooth
myself and end up with the same message.
firstly, i would expect the arch names of booth the kernel (armv4tl) and  
the module (ARMv4) to match, but i am nor sure if i am right.
a short survey indicates that soemthing goes wrong when building the  
kernel.

second thought:
i experience this with qtopia on an sd card and the kernel from teh  
rottimage was smaller than the bin distributed along with the rott-image.
with 2007.2 and the kernel from last monday there is no problem with  
loading modules.

- how did you install? really flashing to the fr or on sd card?
- where's your kernel?
- do the kernel and the modules have the same hash in their respective  
package names?

my 2007.2 says, i did not reboot to qtopia on sd card -- it has no opkg  
nor packagemanagement afaik, but asu has.

opkg search /boot/uImage-2.6.24
kernel-image-2.6.24 -  
2:2.6.24+git25+8533927964761f4e2078ccd8607b90f5acc60b93-r0 -  
/boot/uImage-2.6.24

opkg search /lib/modules/2.6.24/kernel/net/bluetooth/bluetooth.ko
kernel-module-bluetooth -  
2:2.6.24+git25+8533927964761f4e2078ccd8607b90f5acc60b93-r0 -  
/lib/modules/2.6.24/kernel/net/bluetooth/bluetooth.ko