Host resolving errors during opkg install

[Stanislav Sedov]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Mon, 17 Nov 2008 17:45:45 +0100
"Peter Neubauer" <peter at neubauer.se> mentioned:

> HI there,
> trying to download packages during opkg install curently fails on my
> newly installed FR. opkg update works fine, but then, I get
> 
> root at om-gta02:~# opkg install classpath
> Installing classpath (0.97.2-r4) to root...
> Downloading http://downloads.openmoko.org/repository/testing/armv4t/classpath_0.97.2-r4_armv4t.opk
> Collected errors:
>  * Failed to download
> http://downloads.openmoko.org/repository/testing/armv4t/classpath_0.97.2-r4_armv4t.opk,
> error 0
>  * Failed to download classpath. Perhaps you need to run 'opkg update'?
> root at om-gta02:~# wget  http://downloads.openmoko.org/repository/testing/armv4t/c
> lasspath_0.97.2-r4_armv4t.opk
> wget: bad address 'downloads.openmoko.org'
> root at om-gta02:~# ping download.openmoko.org
> ping: bad address 'download.openmoko.org'
> root at om-gta02:~# ping www.kth.se
> PING www.kth.se (130.237.32.143): 56 data bytes
> 64 bytes from 130.237.32.143: seq=0 ttl=56 time=13.965 ms
> 64 bytes from 130.237.32.143: seq=1 ttl=56 time=13.513 ms
> 
> --- www.kth.se ping statistics ---
> 2 packets transmitted, 2 packets received, 0% packet loss
> round-trip min/avg/max = 13.513/13.739/13.965 ms
> 
> 
> 

I think the host should be downloads.openmoko.org,
not *download*.

- -- 
Stanislav Sedov
ST4096-RIPE
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (FreeBSD)

iEYEARECAAYFAkkho5oACgkQK/VZk+smlYHgOwCfSn5ZS7IafyhVaSNawKpRm/Z2
IiYAn0yepuEDyPe+nOGBZiv7EhGfNkfq
=9hSg
-----END PGP SIGNATURE-----