kernel for qt extended 4.4

[Annika Thiel]

Hi!

On Thu, Oct 2, 2008 at 10:17 PM, Vince M. Clark <vclark at globalera.com> wrote:
> I switched a setting to make the menus do the wheel thing (didn't realize
> what I was doing when I selected it) and now I cannot select anything.
> Touchscreen doesn't respond to selection on the wheel. So now I can't get to
> settings, apps, etc. Guess I'll re-flash.
>

You can set it back by calling the programm directly from ssh. You
just need this command:
LD_LIBRARY_PATH=/opt/Trolltech/Qtopia/lib
/opt/Trolltech/Qtopia/bin/serverwidgets

Regards,

Anni


> While I was able to get to apps I don't recall seeing the webkit browser or
> a GPS app. Am I missing something?
>
> I agree, not quite stable yet.
>
> ----- Original Message -----
> From: "Franky Van Liedekerke" <liedekef at telenet.be>
> To: "List for Openmoko community discussion" <community at lists.openmoko.org>
> Sent: Thursday, October 2, 2008 2:03:01 PM (GMT-0700) America/Denver
> Subject: Re: Re: kernel for qt extended 4.4
>
> On Fri, 3 Oct 2008 00:08:55 +0530
> Kishore <kitts.mailinglists at gmail.com> wrote:
>
>> On Thursday 02 Oct 2008 11:53:46 pm Franky Van Liedekerke wrote:
>> > On Thu, 2 Oct 2008 19:43:23 +0200
>> >
>> > Petr Vanek <vanous at penguin.cz> wrote:
>> > > No problem here. I reflashed previous QT snapshot 4.3 so i
>> > > presume if you use kernel from 4.3 you are ready to go.
>> > >
>> > > unless...I was also looking at the "services" screen or what it's
>> > > called in QT4.4 so i might have activated USB networking by an
>> > > accident and it's kernel independent? Check it out anyways.
>> >
>> > hmmm ... I'm guessing that image isn't the official released one,
>> > too many bugs (old and new):
>> >
>> > - lots of kernel-warnings spit out during booting (using
>> > uImage-gta02-mwester-stable-d6f9fd270943fb22.bin from I believe the
>> > previous 4.3.x snapshot version). Or maybe this is a uimage issue?
>> > - timezone management isn't working (the files just aren't there
>> > in /usr/share/timezone). Also the time itself can't be changed.
>> > - echo problem is back
>> > - alarm keeps vibrating the phone, after pressing "snooze"
>> > - each received call arrives twice, causing the second call to show
>> > up as "missed"
>> >
>> > The image is called 4.4.1, but my phone reports it as 4.4.2 ... I
>> > thought it was going to be 4.4.3?
>>
>> Yup! I have all of those issues you mention. Anyway, USB networking
>> is now working after i flashed mwester kernel. I am able to ssh but i
>> cannot connect to the internet. ping google.com gives me "ping: bad
>> address 'google.com'".
>>
>> I checked /etc/resolv.conf and it is empty.
>
> Fix the resolv issue by putting the line "nameserver A.B.C.D" in
> your /etc/resolv.conf (A.B.C.D being the IP of your own nameserver).
> Always needed for usb connections.
> But still ... too many issues found in 2 minutes of testing for this to
> be stable.
>
> Franky
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
>