[Raster+FSO] USB Host keyboard problem

[Joel Newkirk]

Under the latest Rasterman image with FSO repos (frameworkd, zhone,
supporting installed) when I switch to USB Host mode (via sysfs, not dbus),
it will automount my USB thumbdrive, but doesn't do anything with the
keyboard that previously worked, and 'lsusb' is always empty.  Module
hci_usb is inserted.

Output of dmesg for the entire cycle:
s3c2410: changing usb to host
usb 1-2: new low speed USB device using s3c2410-ohci and address 12
usb 1-2: configuration #1 chosen from 1 choice
input: CHESEN USB Keyboard as
/devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.0/input/input19
input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-s3c24xx-2
input: CHESEN USB Keyboard as
/devices/platform/s3c2410-ohci/usb1/1-2/1-2:1.1/input/input20
input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-s3c24xx-2
usb 1-2: USB disconnect, address 12
s3c2410: changing usb to device
usb0: full speed config #1: 500 mA, Ethernet Gadget, using CDC Ethernet

So it sees the keyboard and knows what it is, but no keys work.  Is the
problem with X?

j