debug board seems not working
Lin Mac
mkl23 at hotmail.com
Tue Oct 28 10:01:40 CET 2008
hi,
I'm using Freerunner and debug board v3, and trying to use serial console, and Ubuntu 8.04 on my PC.
I have connected the FR and the debug board with the flexible cable. The /dev/ttyUSB0 and /dev/ttyUSB1 doesn't show up, but only /dev/ttyACM0, when I connected both USB of freerunner and debug board to PC, as described in http://wiki.openmoko.org/wiki/Debug_Board_v3.
1. Should the /dev/ttyUSB0 and /dev/ttyUSB1 show up while no FR connected to debug board (and the debug board connected to PC)?
2. Should I flash the debug board?
Any idea?
Thanks in advance.
----------------------
dmesg result:
[22932.304312] usb 5-2: new full speed USB device using uhci_hcd and address 18
[22932.487138] usb 5-2: configuration #1 chosen from 2 choices
[22932.497342] /build/buildd/linux-2.6.24/drivers/usb/class/cdc-acm.c: This device cannot do calls on its own. It is no modem.
[22932.497373] cdc_acm 5-2:1.0: ttyACM0: USB ACM device
[22935.663858] usb 5-1: new full speed USB device using uhci_hcd and address 19
[22935.816913] usb 5-1: configuration #1 chosen from 1 choice
[22935.818759] hub 5-1:1.0: USB hub found
[22935.820674] hub 5-1:1.0: 4 ports detected
[22936.137318] usb 5-1.1: new full speed USB device using uhci_hcd and address 20
[22936.297399] usb 5-1.1: configuration #1 chosen from 1 choice
--------------
root at test-laptop:~# lsusb
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 046d:c018 Logitech, Inc.
Bus 006 Device 001: ID 0000:0000
Bus 005 Device 022: ID 1457:5118
Bus 005 Device 021: ID 0451:2046 Texas Instruments, Inc. TUSB2046 Hub
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 004 Device 002: ID 064e:a101 Suyin Corp.
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
root at test-laptop:~# lsusb -d 1457:5118 -v
Bus 005 Device 022: ID 1457:5118
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1457
idProduct 0x5118
bcdDevice 5.00
iManufacturer 1 OpenMoko
iProduct 2 Debug Board for Neo1973
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 55
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 Debug Board for Neo1973
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 2 Debug Board for Neo1973
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0000
(Bus Powered)
root at test-laptop:~#
--------------
Best Regards,
Mac Lin
_________________________________________________________________
聰明搜尋和瀏覽網路的免費工具列 — MSN 搜尋工具列
http://toolbar.live.com/
More information about the community
mailing list