Wiki outdated ? was Re: Problems building ASU image
Didier "Ptitjes"
ptitjes at free.fr
Fri Sep 12 23:24:46 CEST 2008
Hello,
It seems that the Wiki is outdated. For example, the Wiki says you have
to make openmoko-devel-image or openmoko-qtopia-x11-image. But the
MokoMakefile version I downloaded has no such target but you have to set
OM_IMAGE_NAME := openmoko-asu-image
in the Makefile and make image.
I'm wondering if anyone has done a fresh build restarting from scratch
with the MokoMakefile as I can't explain my problems.
This is really annoying. I'm blocked before anything may even be compiled!!
Please help. Didier.
Didier "Ptitjes" wrote:
> But if you look at the log it can read the conf files!
> Anyway, I've got rw on all my files...
>
> Didier.
>
> Davide Scaini wrote:
>> permissions??? maybe it's really silly...
>> d
>>
>> On Fri, Sep 12, 2008 at 1:44 PM, Didier Ptitjes <ptitjes at free.fr
>> <mailto:ptitjes at free.fr>> wrote:
>>
>>
>> Hello,
>>
>> Sorry this may be a dumb question. I'm trying to build an ASU image for
>> x86 with the MokoMakefile for several days without success.
>>
>> I carefully followed the explanations of Wiki, searched the
>> mailling-lists and the Web for a tip, but I always get the same error
>> message.
>>
>> moko at didier ~ $ make image
>> ( cd build && . ../setup-env && \
>> ( bitbake openmoko-asu-image u-boot-openmoko ) )
>> ERROR: Unable to open conf/bitbake.conf
>>
>> I checked my setup-env file. All this seems correct. I also echoed
>> BBPATH from it and it seems correct too.
>>
>> I added -DDD to the bitbake command in the Makefile and it looks like it
>> opens the conf file and process it but then it stops with the same
>> message...
>>
>> I can't understand why!
>>
>> Thanks for your help. Didier.
>>
>> Output with -DDD :
>>
>> moko at didier ~ $ make image
>> ( cd build && . ../setup-env && \
>> ( bitbake -DDD openmoko-asu-image u-boot-openmoko ) )
>> DEBUG: CONF reading /home/moko/openembedded/conf/bitbake.conf
>> DEBUG: update_data()
>> DEBUG: update_data()
>> DEBUG: CONF conf/bitbake.conf:539: including conf/site.conf
>> DEBUG: CONF including /home/moko/build/conf/site.conf
>> DEBUG: update_data()
>> DEBUG: CONF conf/bitbake.conf:540: including conf/auto.conf
>> DEBUG: CONF file 'conf/auto.conf' not found
>> DEBUG: CONF conf/bitbake.conf:541: including conf/local.conf
>> DEBUG: CONF including /home/moko/build/conf/local.conf
>> DEBUG: CONF conf/bitbake.conf:546: including conf/build/i686-linux.conf
>> DEBUG: CONF file 'conf/build/i686-linux.conf' not found
>> DEBUG: CONF conf/bitbake.conf:547: including
>> conf/target/INVALID-INVALID.conf
>> DEBUG: CONF file 'conf/target/INVALID-INVALID.conf' not found
>> DEBUG: CONF conf/bitbake.conf:548: including conf/machine/x86.conf
>> DEBUG: CONF including /home/moko/openembedded/conf/machine/x86.conf
>> DEBUG: BB conf/machine/include/tune-x86.inc: handle(data, include)
>> DEBUG: CONF conf/bitbake.conf:549: including conf/distro/openmoko.conf
>> DEBUG: CONF including /home/moko/openembedded/conf/distro/openmoko.conf
>> DEBUG: BB conf/distro/include/preferred-om-2008-versions.inc:
>> handle(data, include)
>> DEBUG: BB conf/distro/include/angstrom-2007-for-openmoko.inc:
>> handle(data, include)
>> DEBUG: BB conf/distro/include/sane-srcdates.inc: handle(data, include)
>> DEBUG: BB conf/distro/include/sane-srcrevs.inc: handle(data, include)
>> DEBUG: BB conf/distro/include/preferred-xorg-versions.inc: handle(data,
>> include)
>> DEBUG: BB conf/distro/include/preferred-gpe-versions-2.8.inc:
>> handle(data, include)
>> DEBUG: BB conf/distro/include/preferred-e-versions.inc: handle(data,
>> include)
>> DEBUG: BB conf/distro/include/angstrom.inc: handle(data, include)
>> DEBUG: update_data()
>> DEBUG: BB conf/distro/include/angstrom-glibc.inc: handle(data, include)
>> DEBUG: BB conf/distro/include/angstrom-package-opk.inc: handle(data,
>> include)
>> DEBUG: update_data()
>> DEBUG: CONF conf/bitbake.conf:550: including conf/documentation.conf
>> DEBUG: CONF including /home/moko/openembedded/conf/documentation.conf
>> DEBUG: setVarFlag(PREFERRED_VERSION, doc, Normally use it as
>> PREFERRED_VERSION_package-name = "" to set the preferred version of more
>> than one version for the package-name is available., data)
>> DEBUG: setVarFlag(BUILD_ARCH, doc, The name of the building
>> architecture. E.g. i686., data)
>> DEBUG: setVarFlag(BUILD_OS, doc, The operating system (in lower case) of
>> the building architecture. E.g linux., data)
>> DEBUG: setVarFlag(BUILD_VENDOR, doc, FIXME, data)
>> DEBUG: setVarFlag(BUILD_SYS, doc, FIXME, data)
>> DEBUG: setVarFlag(BUILD_PREFIX, doc, FIXME, data)
>> DEBUG: setVarFlag(BUILD_CC_ARCH, doc, FIXME, data)
>> DEBUG: setVarFlag(HOST_ARCH, doc, The name of the target architecture.
>> Normally same as the TARGET_ARCH. @see TARGET_ARCH @group base, data)
>> DEBUG: setVarFlag(HOST_OS, doc, The name of the target operating system.
>> Normally the same as the TARGET_OS. @see TARGET_OS @group base, data)
>> DEBUG: setVarFlag(HOST_VENDOR, doc, The name of the vendor. Normally
>> same as the TARGET_VENDOR. @see TARGET_VENDOR, data)
>> DEBUG: setVarFlag(HOST_SYS, doc, FIXME, data)
>> DEBUG: setVarFlag(HOST_PREFIX, doc, Normally same as the TARGET_PREFIX.
>> @see TARGET_PREFIX @group base, data)
>> DEBUG: setVarFlag(HOST_CC_ARCH, doc, Normally same as the
>> TARGET_CC_ARCH. @see TARGET_CC_ARCH @group base, data)
>> DEBUG: setVarFlag(HOST_NONSYSV, doc, This flag can be set to "1" if the
>> host system is not SysV compatible. E.g.fakeroot-native will be build
>> with tcp as IPC implementation., data)
>> DEBUG: setVarFlag(TARGET_ARCH, doc, Build for which architecture.
>> Examples are arm, i686, sh3, mips, powerpc., data)
>> DEBUG: setVarFlag(TARGET_OS, doc, Build for which Operating System.
>> Currently possible values are linux and linux-uclibc. When using
>> linux-uclibc you might want to set USE_NLS_gcc-cross to "no"., data)
>> DEBUG: setVarFlag(TARGET_VENDOR, doc, FIXME, data)
>> DEBUG: setVarFlag(TARGET_SYS, doc, The target system is composed out of
>> TARGET_ARCH,TARGET_VENDOR and TARGET_OS., data)
>> DEBUG: setVarFlag(TARGET_PREFIX, doc, The prefix for the cross compile
>> toolchain. E.g arm-linux- ., data)
>> DEBUG: setVarFlag(TARGET_CC_ARCH, doc, FIXME, data)
>> DEBUG: setVarFlag(TARGET_FPU, doc, Floating point option (mostly for
>> FPU-less systems), can be 'soft' or empty for hardware floating point
>> instructions., data)
>> DEBUG: setVarFlag(ASSUME_PROVIDED, doc, List of packages (recipes
>> actually) which are assumed to be implicitly available.These packages
>> won't be built by bitbake., data)
>> DEBUG: setVarFlag(ASSUME_SHLIBS, doc, List of shlib:package[_version]
>> mappings. Useful for lib packages in ASSUME_PROVIDED,for which automatic
>> shlib dependency tracking doesn't work., data)
>> DEBUG: setVarFlag(PACKAGE_ARCH, doc, The architecture needed for using a
>> resulting package. If you have machine dependant configuration options
>> in your bitbake file add a PACKAGE_ARCH = "${MACHINE_ARCH}" to the
>> file., data)
>> DEBUG: setVarFlag(PACKAGE_ARCHS, doc, A list of architectures compatible
>> with the given target in order of priority, data)
>> DEBUG: setVarFlag(PACKAGE_EXTRA_ARCHS, doc, Set this variable to add
>> extra architectures to the list of supported architectures, data)
>> DEBUG: setVarFlag(DATE, doc, The date the build was started Ymd, data)
>> DEBUG: setVarFlag(TIME, doc, The time the build was started HMS, data)
>> DEBUG: setVarFlag(DATETIME, doc, The date and time the build was started
>> at, data)
>> DEBUG: setVarFlag(PN, doc, PN holds the name of the package (Package
>> Name). It is gathered from the bitbake-file filename, data)
>> DEBUG: setVarFlag(PV, doc, PV holds the version of the package (Package
>> Version). The default value is 1.0, it is retrieved from the
>> bitbake-file filename but can be changed., data)
>> DEBUG: setVarFlag(PR, doc, PR is the revision of the package (Package
>> Revision). By default it is set to r0., data)
>> DEBUG: setVarFlag(PF, doc, Package name - Package version - Package
>> revision (PN-PV-PR), data)
>> DEBUG: setVarFlag(P, doc, Package name - Package version (PN-PF), data)
>> DEBUG: setVarFlag(S, doc, Directory that holds the sources to build,
>> WORKDIR/PN-PV by default. The 'make' or equivalent command is run from
>> this directory., data)
>> DEBUG: setVarFlag(SECTION, doc, Section of the packages e.g.
>> console/networking, data)
>> DEBUG: setVarFlag(PRIORITY, doc, Importance of package, default values
>> are 'optional' or 'needed'., data)
>> DEBUG: setVarFlag(DESCRIPTION, doc, A small description of the package.,
>> data)
>> DEBUG: setVarFlag(LICENSE, doc, The license of the resulting package
>> e.g. GPL, data)
>> DEBUG: setVarFlag(AUTHOR, doc, The author of the files installed., data)
>> DEBUG: setVarFlag(MAINTAINER, doc, Distributions can put this in their
>> .conf file to add their contact information into packages, this is not
>> valid inside recipes, data)
>> DEBUG: setVarFlag(HOMEPAGE, doc, Homepage of the package e.g.
>> http://www.project.net., data)
>> DEBUG: setVarFlag(GROUP_dependencies, doc, The keys in this group
>> influence the dependency handling of BitBake and the resulting
>> packages., data)
>> DEBUG: setVarFlag(DEPENDS, doc, Build time dependencies, things needed
>> to build the package. @group dependencies, data)
>> DEBUG: setVarFlag(RDEPENDS, doc, Run time dependencies, things needed
>> for a given package to run. This is used to populate the ipkg:Depends
>> field. @group dependencies, data)
>> DEBUG: setVarFlag(PROVIDES, doc, Names for additional build time
>> dependencies that this package will provide. @group dependencies, data)
>> DEBUG: setVarFlag(RPROVIDES, doc, Names for additional run time
>> dependencies that this package will provide. This is used to populate
>> the ipkg:Provides field. @group dependencies, data)
>> DEBUG: setVarFlag(GROUP_packaging, doc, The keys in this group influence
>> the package building process. They influence which packages will be
>> generated and which files will be present in the generated
>> packages., data)
>> DEBUG: setVarFlag(PACKAGES, doc, Names of packages to be generated.
>> @group packaging, data)
>> DEBUG: setVarFlag(FILES, doc, Files/Directories belonging to the
>> package. @group packaging, data)
>> DEBUG: setVarFlag(TMPDIR, doc, The temporary directory of openembedded
>> holding work-, deploy, staging- and other directories., data)
>> DEBUG: setVarFlag(CACHE, doc, The directory holding the cache of the
>> metadata., data)
>> DEBUG: setVarFlag(GROUP_fetcher, doc, The key highly influence the
>> fetcher implementations., data)
>> DEBUG: setVarFlag(DL_DIR, doc, The directory where tarballs will be
>> stored. @group fetcher, data)
>> DEBUG: setVarFlag(CVSDIR, doc, The directory where cvs checkouts will be
>> stored in. @group fetcher, data)
>> DEBUG: setVarFlag(GITDIR, doc, The directory where git clones will be
>> stored. @group fetcher, data)
>> DEBUG: setVarFlag(SVNDIR, doc, The directory where subversion checkouts
>> will be stored. @group fetcher, data)
>> DEBUG: setVarFlag(STAMP, doc, The directory that holds files to keep
>> track of what was built., data)
>> DEBUG: setVarFlag(WORKDIR, doc, The directory where a concrete package
>> will be unpacked and built., data)
>> DEBUG: setVarFlag(T, doc, Temporary directory within the WORKDIR., data)
>> DEBUG: setVarFlag(GROUP_locale, doc, Locale generation of the GNU libc
>> implementation, data)
>> DEBUG: setVarFlag(ENABLE_BINARY_LOCALE_GENERATION, doc, Enable the use
>> of qemu to generate locale information during build time on the host
>> instead of runtime on the target. If you have trouble with qemu-native
>> you should make this an empty var. @group locale, data)
>> DEBUG: setVarFlag(PCMCIA_MANAGER, doc, Specify which package(s) to
>> install to handle PCMCIA slots (usually pcmcia-cs or pcmciautils).,
>> data)
>> DEBUG: setVarFlag(SYSVINIT_ENABLED_GETTYS, doc, Specify which VTs should
>> be running a getty, the default is 1, data)
>> DEBUG: setVarFlag(FEED_URIS, doc, List of ipkg feed records to put into
>> generated image., data)
>> DEBUG: setVarFlag(FEED_DEPLOYDIR_BASE_URI, doc, Allow to serve ipk
>> deploy dir as an adhoc feed (bogofeed). Set to base URL of the dir as
>> exported by HTTP. Set of adhoc feed configs will be generated in image.,
>> data)
>> DEBUG: setVarFlag(QA_LOG, doc, Enable logging of QA errors to
>> log.qa_package. Default is not to log., data)
>> DEBUG: setVarFlag(PALMTOP_USE_MULTITHREADED_QT, doc, Set to yes, if you
>> want to build qt apps with CONFIG+=thread, data)
>> DEBUG: setVarFlag(COMPATIBLE_HOST, doc, A regular expression which
>> matches the HOST_SYS names supported by the package/file. Failure to
>> match will cause the file to be skipped by the parser., data)
>> DEBUG: setVarFlag(COMPATIBLE_MACHINE, doc, A regular expression which
>> matches the MACHINES support by the package/file. Failure to match will
>> cause the file to be skipped by the parser., data)
>> DEBUG: setVarFlag(SOURCE_MIRROR_FETCH, doc, Switch marking build as
>> source fetcher. Used to skip COMPATIBLE_* checking., data)
>> DEBUG: setVarFlag(SOURCE_MIRROR_URL, doc, URL to source mirror which
>> will be used before fetching from original SRC_URI., data)
>> DEBUG: setVarFlag(BBINCLUDELOGS, doc, Boolean switch to get log printed
>> on failure., data)
>> DEBUG: setVarFlag(BBINCLUDELOGS_LINES, doc, Amount of log lines printed
>> on failure., data)
>> DEBUG: setVarFlag(SEPPUKU_AUTOBUILD, doc, This is an autobuild, broken
>> packages are cleaned automatically. Don't define this at all if this is
>> not an autobuild, data)
>> DEBUG: setVarFlag(SEPPUKU_USER, doc, The login-name for the bugzilla
>> account, data)
>> DEBUG: setVarFlag(SEPPUKU_PASS, doc, The password for this account,
>> data)
>> DEBUG: setVarFlag(SEPPUKU_LOGIN, doc, path to the login script of the
>> bugzilla, note the ? at the end, data)
>> DEBUG: setVarFlag(SEPPUKU_QUERY, doc, The query script of the bugzilla,
>> data)
>> DEBUG: setVarFlag(SEPPUKU_NEWREPORT, doc, This is the url used to create
>> a new bug report, note the defaults for version and priority and more,
>> and the trailing &, data)
>> DEBUG: setVarFlag(SEPPUKU_ADDCOMMENT, doc, The url used to reopen bug
>> reports and to add another new comment, data)
>> DEBUG: setVarFlag(SEPPUKU_ATTACHMENT, doc, The url used to create
>> attachments., data)
>> DEBUG: setVarFlag(SEPPUKU_PRODUCT, doc, The product inside the
>> bugtracker, data)
>> DEBUG: setVarFlag(SEPPUKU_COMPONENT, doc, The component inside the
>> bugtracker, data)
>> DEBUG: CONF including /home/moko/openembedded/conf/sanity.conf
>> DEBUG: update_data()
>> DEBUG: BB classes/base.bbclass: handle(data, include)
>> DEBUG: setVarFlag(do_show_versions, nostamp, 1, data)
>> DEBUG: setVarFlag(do_lockdown, nostamp, 1, data)
>> DEBUG: setVarFlag(do_lockdown, recrdeptask, do_show_versions, data)
>> DEBUG: setVarFlag(do_listtasks, nostamp, 1, data)
>> DEBUG: setVarFlag(do_clean, dirs, ${TOPDIR}, data)
>> DEBUG: setVarFlag(do_clean, nostamp, 1, data)
>> DEBUG: setVarFlag(do_rebuild, dirs, ${TOPDIR}, data)
>> DEBUG: setVarFlag(do_rebuild, nostamp, 1, data)
>> DEBUG: setVarFlag(do_mrproper, dirs, ${TOPDIR}, data)
>> DEBUG: setVarFlag(do_mrproper, nostamp, 1, data)
>> DEBUG: setVarFlag(do_fetch, dirs, ${DL_DIR}, data)
>> DEBUG: setVarFlag(do_fetch, depends, shasum-native:do_populate_staging,
>> data)
>> DEBUG: setVarFlag(do_fetchall, recrdeptask, do_fetch, data)
>> DEBUG: setVarFlag(do_buildall, recrdeptask, do_build, data)
>> DEBUG: setVarFlag(do_unpack, dirs, ${WORKDIR}, data)
>> DEBUG: setVarFlag(do_configure, dirs, ${S} ${B}, data)
>> DEBUG: setVarFlag(do_configure, deptask, do_populate_staging, data)
>> DEBUG: setVarFlag(do_compile, dirs, ${S} ${B}, data)
>> DEBUG: setVarFlag(do_populate_staging, dirs,
>> ${STAGING_DIR_TARGET}/${layout_bindir}
>> ${STAGING_DIR_TARGET}/${layout_libdir}
>> ${STAGING_DIR_TARGET}/${layout_includedir}
>> ${STAGING_BINDIR_NATIVE} ${STAGING_LIBDIR_NATIVE}
>> ${STAGING_INCDIR_NATIVE}
>> ${STAGING_DATADIR} ${S} ${B}, data)
>> DEBUG: setVarFlag(do_install, dirs, ${D} ${S} ${B}, data)
>> DEBUG: setVarFlag(do_install, cleandirs, ${D}, data)
>> DEBUG: setVarFlag(do_build, func, 1, data)
>> DEBUG: setVarFlag(MACHINE, unexport, 1, data)
>> DEBUG: setVarFlag(TARGET_ARCH, unexport, 1, data)
>> DEBUG: setVarFlag(DISTRO, unexport, 1, data)
>> DEBUG: BB :0: inheriting classes/patch.bbclass
>> DEBUG: BB classes/patch.bbclass: handle(data, include)
>> DEBUG: setVarFlag(do_patch, dirs, ${WORKDIR}, data)
>> DEBUG: BB :0: inheriting classes/siteinfo.bbclass
>> DEBUG: BB classes/siteinfo.bbclass: handle(data, include)
>> DEBUG: setVarFlag(MIRRORS, func, 0, data)
>> DEBUG: BB classes/dev_shell.bbclass: handle(data, include)
>> ERROR: Unable to open conf/bitbake.conf
>> make: *** [openmoko-asu-image] Erreur 1
>>
>> _______________________________________________
>> Openmoko community mailing list
>> community at lists.openmoko.org <mailto:community at lists.openmoko.org>
>> http://lists.openmoko.org/mailman/listinfo/community
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Openmoko community mailing list
>> community at lists.openmoko.org
>> http://lists.openmoko.org/mailman/listinfo/community
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
>
More information about the community
mailing list
