AW: Multicast over USB?

[Sebastian Billaudelle]

Hm. Would you please paste the code somewhere?

Did you bind it to the right interface(s)?

Am Sonntag, den 05.04.2009, 09:17 +0000 schrieb hab keen oh ne:
> Corrected Multivast to Multicast^^
> Well, Multicast seems to be running on the usb network devices
> Here the output on the FR:
> 
> usb0      Link encap:Ethernet  HWaddr BE:23:B2:E6:9C:21
>           inet addr:192.168.0.202  Bcast:192.168.0.255
> Mask:255.255.255.0
>           inet6 addr: fe80::bc23:b2ff:fee6:9c21/64 Scope:Link
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:137 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:118 errors:0 dropped:0 overruns:0 carrier:0
>           collisions:0 txqueuelen:1000
>           RX bytes:16976 (16.5 KiB)  TX bytes:14411 (14.0 KiB)
> 
> and here on my host(unfortunately in German):
> 
> usb0      Link encap:Ethernet  Hardware Adresse 92:3C:A3:BC:33:8B  
>           inet Adresse:192.168.0.200  Bcast:192.168.0.255
> Maske:255.255.255.0
>           inet6 Adresse: fe80::903c:a3ff:febc:338b/64
> Gültigkeitsbereich:Verbindung
>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>           RX packets:78 errors:0 dropped:0 overruns:0 frame:0
>           TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
>           Kollisionen:0 Sendewarteschlangenlänge:1000
>           RX bytes:8681 (8.4 KiB)  TX bytes:13249 (12.9 KiB)
> 
> 
> 
> ______________________________________________________________________
> Von: Sebastian Billaudelle <sebbil at gmx.de>
> An: List for Openmoko community discussion
> <community at lists.openmoko.org>
> Gesendet: Sonntag, den 5. April 2009, 08:26:10 Uhr
> Betreff: Re: Multivast over USB?
> 
> Am Samstag, den 04.04.2009, 16:06 +0000 schrieb hab keen oh ne:
> > Hi,
> > Im currently working with multicast for my internship at a
> university.
> 
> Sounds interesting:)
> 
> > A universitie's guy said, that probably Multicast isnt supported
> over
> > USB, is that right?
> 
> Would you please attach the output of "ifconfig" on your Neo and PC?
> On some interfaces MCast is disabled by default. You can change this
> by
> adding a route.
> 
> Cheers,
> Sebastian
> 
> 
> 
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
> 
> 
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community