[QtExtended] Latest and greatest, progress mail 7
Franky Van Liedekerke
liedekef at telenet.be
Fri Apr 17 13:51:11 CEST 2009
On Fri, Apr 17, 2009 at 11:53 AM, Sascha Gering <haxxx at gmx.li> wrote:
> Hi Filip,
>
> Here is my output:
>
> > root at MuhKo:~# cat /proc/cmdline
> > loglevel=4 console=tty0 console=ttySAC2,115200 init=/sbin/init ro
> mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(qi),0x00040000(depr-ub-env),0x00800000(kernel),0x000a0000(depr),0x00040000(identity-ext2),0x0f6a0000(rootfs)
> g_ether.host_addr=00:1F:11:01:6D:2E g_ether.dev_addr=00:1F:11:01:6D:2E
> rootfstype=jffs2 root=/dev/mtdblock6
>
> > root at MuhKo:~# cat /boot/append-GTA02
> > rw rootdelay=5 loglevel=1 quiet
>
> Hmm, why is there a "loglevel=4" in my cmdline, but "loglevel=1" in my
> append file?
>
> Sascha
>
> Filip Onkelinx schrieb:
> > Hi all,
> >
> > I know boot speed and resume speed is influenced by kernel boot
> > parameters: the more kernel/debug messages displayed (on rather slow
> > framebuffer), the slower the device will boot/resume. Might want to
> > compare boot params (cat /proc/cmdline , look for loglevel= and console=
> )
> >
> > F.
>
The FSO boots very quickly (without qte), what I've found is that it takes a
long time to launch qtextended. It seems to launch once, abort and then
launch again.
In the AtChat log output, I see that it tries different times to send a
Ctrl-Z command to the modem, and only succeeds on the third time, which
might explain the slow boot as well.
Franky
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090417/2069495b/attachment.htm
More information about the community
mailing list