[SHR-Testing] Enlightment SIGKILL'd

Steven Le Roux steven at le-roux.info
Sat Apr 18 21:11:27 CEST 2009


On Sat, Apr 18, 2009 at 9:05 PM, Philippe Lhardy
<philippelhardy at chez.com> wrote:
> Hi,
>
> I try to install latest shr-testing image got at
> http://build.shr-project.org/shr-testing/images/om-gta02/openmoko-shr-image-glibc-ipk--20090416-om-gta02.rootfs.tar.gz
> i untar the content on a ext2 ( tested a ext3) too and boot with Qi on it,
> this is on a usdcard on the 3rd partition ( 2nd is android that was booting
> until i put noboot option ).
> i put rootdelay=5 on /boot/append since it is on ucard
> It just boot and start Xglamo but a white windows come up with enligthment
> SIGKILL'd and i can retry many times it doesn't come up.
> ssh & usbnet conenctivty is working and if i launch enlightment_strat by
> hand it complains BUS_ERROR
>
> root at om-gta02 ~ $ Xglamo&
> root at om-gta02 ~ $ (II) verbosity set to 5
> Using GLAMO 3362 card
> (II) Screen: 16/16 depth/bpp
> (II) vram size:4194304, onscreen vram size:614400, offscreen vram
> size:3579904
> (II) initialising offscreen pixmaps
> Extended Input Devices not yet supported. Impelement it at line 647 in
> kinput.c
>
> root at om-gta02 ~ $
> root at om-gta02 ~ $ enlightenment_start
> E - PID=2209, do_precache=0
> ESTART: 0.00041 [0.00041] - begin
> ESTART: 0.01203 [0.01163] - signals done
> ESTART: 0.02210 [0.01007] - determine prefix
> e_prefix_determine()
> DYNAMIC DETERMINED PREFIX: /usr
> ESTART: 0.05705 [0.03495] - prefix done
> ESTART: 0.06641 [0.00936] - eina init
> ESTART: 0.11270 [0.04629] - intl init
> ESTART: 0.12229 [0.00959] - parse args
> ESTART: 0.13078 [0.00849] - arg parse done
> ESTART: 0.13942 [0.00863] - ecore init
> ESTART: 0.17632 [0.03690] - ecore_file init
> ESTART: 0.18964 [0.01332] - more ecore
> ESTART: 0.19760 [0.00796] - x connect
> ESTART: 0.48743 [0.28983] - ecore_con
> ESTART: 1.87269 [1.38526] - xinerama
> E17 INIT: XINERAMA CHOSEN: [0], 480x640+0+0
> ESTART: 1.89923 [0.02654] - x hints
> ESTART: 1.91815 [0.01892] - x hints done
> ESTART: 1.92139 [0.00325] - ecore_evas init
> ESTART: 1.94193 [0.02054] - test done
> ESTART: 1.95010 [0.00817] - efreet
> ESTART: 1.97073 [0.02063] - efreet done
> ESTART: 1.97889 [0.00816] - configure
> ESTART: 1.98905 [0.01016] - dirs
> ESTART: 2.00344 [0.01439] - filereg
> ESTART: 2.01261 [0.00916] - config
> **** BUS ERROR ****

try :

cd /root && mv .e .e-old && enlightenment_start

>
> What did i miss  ? Is that image correct ?
> What is the correct image to have a working environment ?
> Why does it mount root as ext4 ? ( with ext2 installation it complained
> about circular references )
>
> I am willing to help but in testing it seems there is no gdb what doesn't
> help to debug things.
>
> Please appologize if i polute the mailling list with usless remarks.
>
> Regards
> Philippe
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
>



-- 
Steven Le Roux
Jabber-ID : Steven at jabber.fr
0x39494CCB <steven at le-roux.info>
2FF7 226B 552E 4709 03F0  6281 72D7 A010 3949 4CCB




More information about the community mailing list