fixing bug #1024 successful reports?

[Thomas HOCEDEZ]

Nice a picture is universally understandable !

Just a doubt I still have: why did you draw the c1009 outside the GSM 
antenna. regarding to this picture : 
http://n2.nabble.com/attachment/2971067/0/GSM_Modem_rework_try.JPG It is 
inside ...
I'm a bit upset ...

Bernd Prünster a écrit :
>
>> Hi,
>>
>> We (french FR comunity) are trying to solve the #1024 bug. I put a 
>> 10uF SMD cap inside my GSM can, and I saw an increased battery life. 
>> your way to solve it is not as clear as I understand it.
>> Correct me if i'm wrong : you only soldered the (+) of the c1009 cap 
>> to the GND ?  or other way my english tell me you did : on wire on 
>> the (+)  of the cap, on on the (-), and the two wires on the GND of 
>> the phone ?
>>
>> By advance thanks a lot.
>>
>> Thomas
>> openmoko-fr.org
>> freerunner.daily.free.fr
> maybe i screwd the description up
>
> i attatched a pic describing how i did it.
> basically solder a lacquer wire to c1009's (+) wich you will fit 
> through the shielding can so you can add another c in parallel which 
> can be any kind of tht electrolyte capacitor small enought to fit in 
> the gsm antenna. ofcourse this c also needs to be connected to gnd, so 
> take another peice of lacquer wire to connect the other capacitors (-) 
> to gnd.
>
> hope it helps (pics will be postet within the next days)
>
> br
>
>
> ------------------------------------------------------------------------
>