fixing bug #1024 successful reports?

Bernd Prünster bernd.pruenster at gmail.com
Mon Aug 10 21:18:42 CEST 2009


Paul Fertser schrieb:
> Vasco Névoa <vasco.nevoa at sapo.pt> writes:
>   
>> I've been following this discussion from a distance, not paying much  
>> attention, but I'd like to warn that this fix is better done by  
>> replacing the original capacitor. 
>>     
>
> Yes, with the one with low ESR, so one most probably will have to use
> a ceramic.
>
>   
>> One should avoid putting wires inside an RF can, especially if they
>> run towards the outside of the can. It ruins the can shielding
>> purpose... 
>>     
>
> Probably yes, probably not. Depends on luck and black magic. But
> you're right, if routing anything outside the shield can be avoided,
> it should be. Or at least some small nice ferrite should be placed on
> the fire as near to the can as possible.
>
> Thanks!
>
>   
Jup thats right it depends mostly on luck. i just gave it a shot and it 
works flawlessly, if it had not worked i could have simply unsolered it.

i did not take a close look at the schematic but i would guess this 
c1009 acts a s buffer for modem power supply, right?!




More information about the community mailing list