[shr-u] wifi timeout with mokonnect

Rui Miguel Silva Seabra rms at 1407.org
Wed Aug 12 12:46:53 CEST 2009


On Wed, Aug 12, 2009 at 11:39:18AM +0100, Rui Miguel Silva Seabra wrote:
> On Wed, Aug 12, 2009 at 12:56:26PM +0400, Paul Fertser wrote:
> > Bernhard Reiter <ockham at raz.or.at> writes:
> > > Am Dienstag, den 11.08.2009, 10:41 +0400 schrieb Paul Fertser:
> > >> Please try wpa_supplicant method as described on FSO_Resources
> > >> wikipage and report the results.
> > >
> > > ok, using fsoraw it seems to connect to the router (only the important
> > > part given here):
> > >
> > > CTRL-EVENT-SCAN-RESULTS
> > > Trying to associate with <mac address> (SSID='<SSID>' freq=2437 MHz)
> > > Associated with <mac address>
> > > WPA: Key negotiation completed with <mac address> [PTK=CCMP GTK=TKIP]
> > > CTRL-EVENT-CONNECTED - Connection to <mac address> completed (auth)
> > > [id=0 id_str=]
> > >
> > > But unfortunately, I still can't ping my router, nor can I ping the
> > > FreeRunner from my laptop either.
> > 
> > You're supposed to somehow set IP for eth0 after that (usually with
> > the help of DHCP client). I really wonder why it's not obvious :S
> 
> You're also supposed to have an SSID setup before using a DHCP client.
> 
> At least for me that NEVER happens :|

And before someone blames the wifi driver, mofi has no problem connecting
(but mokonnect is what I wish).

Rui

-- 



More information about the community mailing list