QtMoko v15

ghislain ghislain at basetrend.nl
Fri Dec 18 12:33:30 CET 2009


The installer-images I've created are intended to flash from sdcard instead
of dfu-util and are to be used as described here:
- Prepare your sdCard, create partitions: 1=vfat, 2=swap
- Extract the content of the zip-file to the first partition of the sdcard
(directly from PC is the quickest way to go)
- Boot from sdcard (nor-mode, that is aux+power and choose 2nd option)

Now the phone will be flashed, this is what will happen:
- flash qi.img
- reboot
- flash kernel.img
- flash rootfs.img
- restore qtbackup.tgz (optional, see below)
- reboot
- start QtMoko

If you used QtMoko before and you have created a backup with QtBackup (found
in the software-feeds) there will be an qtbackup.tgz file on the sdcard, if
this file is found by the installer-image it will be restored, this way you
can preserve contacts, documents, settings, applications etc over
different-versions of QtMoko.

Yoric Kotchukov wrote:
> ghislain wrote:
>> The zip-file contains a few files, the rootfs.img file is the jffs-image
>> The kernel.img file is the uImage, the uImage files in the zip-file are
>> the ones used to flash the phone.
> I renamed in rootfs.img * jffs, "the uImage file in the zip-file" in *
> bin, dfu-util worked without errors. When you turn around "kernel image
> not found", and u-boot and Qi. Where can I go wrong?

View this message in context: http://n2.nabble.com/QtMoko-v15-tp4159253p4186086.html
Sent from the Openmoko Community mailing list archive at Nabble.com.

More information about the community mailing list