unable to enumerate USB device on port 1
Christopher J. White
chris at grierwhite.com
Mon Feb 2 14:30:55 CET 2009
On Mon, 2009-02-02 at 13:33 +0100, joakim at verona.se wrote:
> John Mandereau <john.mandereau at gmail.com> writes:
>
> > joakim at verona.se a écrit :
> >> usb 4-1: new full speed USB device using uhci_hcd and address 79
> >> usb 4-1: device descriptor read/64, error -71
> >> usb 4-1: device descriptor read/64, error -71
> >> usb 4-1: new full speed USB device using uhci_hcd and address 80
> >> usb 4-1: device descriptor read/64, error -71
> >> usb 4-1: device descriptor read/64, error -71
> >> usb 4-1: new full speed USB device using uhci_hcd and address 81
> >> usb 4-1: device not accepting address 81, error -71
> >> usb 4-1: new full speed USB device using uhci_hcd and address 82
> >> usb 4-1: device not accepting address 82, error -71
> >> hub 4-0:1.0: unable to enumerate USB device on port 1
> >>
I had this happen last week, seemed to occur when it was completely
dead, plugged into the wall, gained some charge and then auto-booted.
The only remedy was to reboot the FR, then it worked fine. (FYI - I'm
running Debian with Qi).
...cj
More information about the community
mailing list