Flashing GSM firmware (was Re: Recommended SIM for Italy ?)

Peter Klassen neo.freerunner at googlemail.com
Tue Feb 24 10:43:38 CET 2009


2009/2/23 Steve 'dillo Okay <armadilo at roadknightlabs.com>:
> root at om-gta02:/usr/sbin# echo 0 >/sys/bus/platform/devices/neo1973-pm-
> gsm.0/power_on
> root at om-gta02:/usr/sbin# echo 1 >/sys/bus/platform/devices/neo1973-pm-
> gsm.0/power_on
> root at om-gta02:/usr/sbin# echo "AT at POFF" >/dev/ttySAC0
> root at om-gta02:/usr/sbin# FLUID_PORT=/dev/ttySAC0 fluid.exe -oo -b
> 115200 -f /home/root/gsm_ac_gp_fd_pu_em_cph_
> ds_vc_cal35_ri_36_amd8_ts0-moko10.m0
> FLUID Revision 2.27, (23 Aug 2004). Copyright Texas Instruments,
> 2001-2004.
> Reading image file: '/home/root/
> gsm_ac_gp_fd_pu_em_cph_ds_vc_cal35_ri_36_amd8_ts0-moko10.m0' (2138kB) ok
> Bootloader: (reset target)
>
> Help ?
> How long should I wait for the Bootloader to respond to the "s3c24xx-
> gpio b7=1" command ?

Hi Steve,
after you see Bootloader: (reset target)
you have to do
root at om-gta02:~# s3c24xx-gpio b7=1
in the second session. This worked for me with moko11-b1 :)

Best
Peter




More information about the community mailing list