[Debian]Voice recorder - ecasound --> Help

[kimaidou]

Ok. thanks for your great help.

For now, I choose the simplicity and
* use the state files provided with the fr
* use the -D plughw:0,0 option to record only a mono file and use -r 8000 to
record at 8khZ

So my line becomes:
arecord -D plughw:0,0 -r 8000 $userfolder"/"$myname &

This saves a lot of space : 2MO --> 100 kO for a 10 seconds record.

I am about to release version 2 :D

2009/2/22 Rask Ingemann Lambertsen <rask at sygehus.dk>

> On Sun, Feb 22, 2009 at 01:30:52PM +0100, kimaidou wrote:
> > Hi guys
> >
> > I have a question : why not just pass the good parameters to arecord so
> that
> > it recors in 8bit, Mono, 8kHz as :
> > arecord -D hw -f S16_LE -t wav -c 1 -r 8000 myfile.wav
>
> $ arecord -D hw -f S16_LE -t wav -c 1 -r 8000 myfile.wav
> Recording WAVE 'myfile.wav' : Signed 16 bit Little Endian, Rate 8000 Hz,
> Mono
> arecord: set_params:923: Channels count non available
>
> $ arecord -D hw -f S8 -t wav -c 2 -r 8000 myfile.wav
> Recording WAVE 'myfile.wav' : Signed 8 bit, Rate 8000 Hz, Stereo
> arecord: set_params:918: Sample format non available
>
> $ arecord -D hw -f U8 -t wav -c 2 -r 8000 myfile.wav
> Recording WAVE 'myfile.wav' : Unsigned 8 bit, Rate 8000 Hz, Stereo
> arecord: set_params:918: Sample format non available
>
> --
> Rask Ingemann Lambertsen
> Danish law requires addresses in e-mail to be logged and stored for a year
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090224/c7cc2503/attachment.htm