Debug Board in Vancouver, BC

[Vasili Sviridov]

Ok, that made it even worse :(

Now I only have NOR uBoot and dfu-util still gives me only 1 alternate 
there which is "USB Device Firmware Upgrade".
Cannot flash the NAND uBoot, since dfu-util does not see the required 
partition...

Vasili

Mike Montour wrote:
> Vasili Sviridov wrote:
>   
>> Hello All,
>>
>> Since both my previous posts haven't helped me to fix my phone looks 
>> like I need to devirginate it. Unfortunately I do not have the debug 
>> board, and paying $100 + shipping is a bit steep for just one thing to do.
>>
>> Is there anyone in Vancouver, BC that has one and willing to help me to 
>> get my Moko working - please respond.
>>     
>
> I have a v2 (Neo1973) debug board in Vancouver, but you shouldn't need 
> it if you have a Freerunner with a working NOR u-boot.
>
> I haven't read all of the previous messages in this thread so someone 
> else might have already said this, but I would:
>   - Boot into NOR u-boot
>   - Erase the NAND ("nand erase" or "nand createbbt")
>   - Exit from the u-boot console
>   - Flash a new u-boot ("dfu-util -R -a u-boot -D /path/to/u-boot.bin")
>   - Reboot into NAND u-boot, then enter the u-boot console
>   - Execute "dynpart", "dynenv set u-boot_env", "saveenv" to set up the 
> default environment variables
>   - Reboot into NAND u-boot again
>   - Download a new kernel + rootfs with dfu-util
>   - Fix up the rest of your environment variables through the u-boot 
> console.
>
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>   

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090104/7791ff3a/attachment.htm