Debug Board in Vancouver, BC

Mike Montour mail at
Mon Jan 5 03:13:32 CET 2009

Vasili Sviridov wrote:
> Ok, that made it even worse :(
> Now I only have NOR uBoot and dfu-util still gives me only 1 alternate 
> there which is "USB Device Firmware Upgrade".
> Cannot flash the NAND uBoot, since dfu-util does not see the required 
> partition...

Don't pay too much attention to the "dfu-util -l" output - there are two 
different modes the device can be in, and in the default one you don't 
see the other alternate settings listed. When you run the dfu-util 
Download command it should automatically set the device into the 
required mode. If it fails then try running the exact same command a 
second time - sometimes it fails on the first try.

More information about the community mailing list