Debug Board in Vancouver, BC

[Vasili Sviridov]

Mike Montour wrote:
> Vasili Sviridov wrote:
>   
>> Ok, that made it even worse :(
>>
>> Now I only have NOR uBoot and dfu-util still gives me only 1 alternate 
>> there which is "USB Device Firmware Upgrade".
>> Cannot flash the NAND uBoot, since dfu-util does not see the required 
>> partition...
>>     
>
> Don't pay too much attention to the "dfu-util -l" output - there are two 
> different modes the device can be in, and in the default one you don't 
> see the other alternate settings listed. When you run the dfu-util 
> Download command it should automatically set the device into the 
> required mode. If it fails then try running the exact same command a 
> second time - sometimes it fails on the first try.
Thanks, what's the good version of NAND uBoot to flash?

V.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090104/49f58025/attachment.htm