[all] call for configurations
tonyberth at googlemail.com
Wed Jul 15 12:43:26 CEST 2009
On Wed, Jul 15, 2009 at 12:27 PM, William Kenworthy <billk at iinet.net.au>wrote:
> On Wed, 2009-07-15 at 12:05 +0200, Tony Berth wrote:
> > On Wed, Jul 15, 2009 at 12:00 PM, Davide Scaini <dscaini at gmail.com>
> > wrote:
> > Ok guys!
> > we're talking everyday of a different issue that makes our fr
> > not really usable... but i'm sure that there is someone who as
> > a fr decently working and he/she can share with us his tips.
> > My idea is to open a thread where everyone posts his
> > configuration with working/not working sections. Maybe,
> > finally, we can find a balance merging all the diffs that
> > works...
> > My2cents:
> > system: SHR-U shr-image-glibc-ipk--20090709
> > kernel: 2.6.28-oe1
> > +gitr34240a1c06ae36180dee695aa25bbae869b2aa26-r3-om-gta02.bin
> > (it'a a TRUE .28-rc4)
> > (with modules, i haven't figured out how to extract the tar on
> > my fr, i extract it on the sd then cp on /lib/ )
> > boot: qi
> > Performances:
> > wifi: I got wifi working for a long with that kernel, but now
> > i cannot get connected via wifi 'cause this error:
> > run-parts: /etc/network/if-pre-up.d/
> > wpasupplicant exited with code 1
> > i have no idea how to handle it.
> > (on debian i had always a working wifi with no troubles... i
> > should search for the script i used...)
> > gprs: never tried
> > gps: works like a charm
> > calls: i have the very same of all with call volume, but i'll
> > fix it copying alsa states from shr-testing.
> > usb: get the connection reliably
> > software: minimo, tangogps, yaouh, orrery, mofi, leafpad
> > (terminal) are the most used.
> > shr-settings is _very_ useful, that' why i abandoned debian
> > (even if debian has tons of software...)
> > what i miss: a realiable wifi :( a finger friendly file
> > manager.
> > (ps: I cannot download anymore bigG maps iwth the "repos"
> > linked on wiki... do you know why?)
> > As you can see my system is not really that working, what i
> > really miss is the wifi... i mainly use it as a pda.
> > concerning the call volume, could you please post the settings for
> > that? I tried different things but no success so far :(
> > Thanks Tony
> Use the following one liner:
> mdbus -s org.freesmartphone.ogsmd /org/freesmartphone/GSM/Device
> org.freesmartphone.GSM.Device.SetSpeakerVolume 68
> With an otherwise standard shr-u, its fine - if I dont reduce the volume
> this way the other end just hears noise. Ive tried to tune the state
> file, but no luck - too many settings and too little time ...
Thanks for your reply.
What is the current SpeakerVolume which this command will change it to '68'
and if I restart FR do I have to re-issue that command?
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the community