First SSH to FR: Permission denied

jeremy jozwik jerjoz.forums at gmail.com
Thu Jun 11 07:10:57 CEST 2009


what are you running? on fedora i have to unplug / ifup ifdown several times
before i can ping the freerunner. and make sure if you have network manager
that you are connected via usb0 and not eth0. sometimes i need to alternate
the ping

On Wed, Jun 10, 2009 at 9:27 PM, Mike <mikeumo at gmail.com> wrote:

> I am now trying 192.168.0.202 and have no response. In fact, I get:
>
> ping -I usb0 192.168.0.202
> PING 192.168.0.202 (192.168.0.202) from 192.168.0.200 usb0: 56(84) bytes of
> data.
> From 192.168.0.200 icmp_seq=1 Destination Host Unreachable
> From 192.168.0.200 icmp_seq=2 Destination Host Unreachable
> From 192.168.0.200 icmp_seq=3 Destination Host Unreachable
> From 192.168.0.200 icmp_seq=4 Destination Host Unreachable
> From 192.168.0.200 icmp_seq=5 Destination Host Unreachable
> From 192.168.0.200 icmp_seq=6 Destination Host Unreachable
> ^C
> --- 192.168.0.202 ping statistics ---
> 9 packets transmitted, 0 received, +6 errors, 100% packet loss, time 8147ms
> pipe 3
>
> but
>
> ifconfig -a
>
> eth0 ...
> ...
>
> usb0      Link encap:Ethernet  HWaddr DE:D7:63:45:48:6B
>          inet addr:192.168.0.200  Bcast:0.0.0.0  Mask:255.255.255.0
>          BROADCAST MULTICAST  MTU:1500  Metric:1
>          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
>          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
>          collisions:0 txqueuelen:1000
>          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
>
>
> my firewall is off and I added "192.168.0.202 om" to /etc/hosts
>
> On Wednesday 10 June 2009 21:47:35 Korbinian Rosenegger wrote:
> > Hi
> >
> > Try 192.168.0.202, the IP you tried is your desktop :)
> >
> > I've also done this many times until i added this line to /etc/hosts on
> > my desktop:
> >
> > 192.168.0.202 om
> >
> >
> > cu Korbi
> >
> > On Wed, 2009-06-10 at 20:17 -0500, Mike wrote:
> > > Hello --
> > >
> > > I just got the FR. Very nice! I am trying to SSH to FR to check the
> > > firmware version. I can ping 192.168.0.200 with 0% loss. However, when
> I
> > >
> > > ssh root at 192.168.0.200
> > >
> > > and enter either blank  (as suggested in the Wiki) or "root" password
> at
> > > the prompt I get "Permission denied, please try again."
> > >
> > > What is the problem?
> > >
> > > Thank you for your time,
> > >
> > > Mike.
> > >
> > >
> > >
> > > _______________________________________________
> > > Openmoko community mailing list
> > > community at lists.openmoko.org
> > > http://lists.openmoko.org/mailman/listinfo/community
>
>
>
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090610/cfc1a30e/attachment.htm 


More information about the community mailing list