Problem with package built with my OE environment
GNUtoo
GNUtoo at no-log.org
Tue Jun 16 00:19:07 CEST 2009
On Mon, 2009-06-15 at 10:17 +0100, Rui Miguel Silva Seabra wrote:
> Hi,
>
> I'm making an Identi.ca client, and my openembedded environment seems ok
> (everything was built).
>
> This is my bitbake recipe, a straight ripoff from my omnewrotate:
>
> vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
>
> DESCRIPTION = "Simple elementary client for Identi.ca"
> HOMEPAGE = "http://code.google.com/p/elmdentica/"
> AUTHOR = "Rui Seabra"
> LICENSE = "GPLv3"
> SECTION = "x11/internet"
> DEPENDS = "libxml2 glib-2.0 curl elementary"
> RDEPENDS = "libxml2 glib-2.0 curl elementary"
> PV = "0.0.1"
> PR = "r0"
>
> SVN_REV=""
>
> #SRC_URI = "svn://elmdentica.googlecode.com/svn/trunk;module=.;proto=http;rev=${SVN_REV}"
> #S = "${WORKDIR}"
> SRC_URI = "file:///home/rms/svn/elmdentica/"
> S = "${WORKDIR}/${PN}"
>
> inherit autotools
>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> It built a package:
>
> vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
>
> rms at roque:~/svn/elmdentica$ ls -alF /opt/openmoko/fso-testing/tmp/deploy/glibc/ipk/armv4t/elmdentica_0.0.1-r0_armv4t.ipk
> -rw-r--r-- 1 rms rms 11844 2009-06-15 06:46 /opt/openmoko/fso-testing/tmp/deploy/glibc/ipk/armv4t/elmdentica_0.0.1-r0_armv4t.ipk
>
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>
> However, installing it:
>
> root at om-gta02:~# opkg install elmdentica_0.0.1-r0_armv4t.ipk
> Installing elmdentica (0.0.1-r0) to root...
> Collected errors:
> * ERROR: Cannot satisfy the following dependencies for elmdentica:
> * libelementary-ver-pre-svn-01-0
> * libelementary-ver-pre-svn-01-0 (>= 0.0.0+svnr40978)
> * libedje-ver-pre-svn-01-0 (>= 0.9.92.060+svnr40978)
> * libecore-file-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libecore-ver-pre-svn-01-con (>= 0.9.9.060+svnr40978)
> * libecore-evas-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libecore-imf-evas-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libembryo-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libecore-job-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libecore-imf-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libecore-fb-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libecore-x-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libecore-input-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libecore-txt-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
> * libeet1 (>= 1.1.0+svnr40978)
> * libecore-ver-pre-svn-01-0 (>= 0.9.9.060+svnr40978)
>
> Now... firstly I built with fso-unstable (because I'm running a daily) (argh
> two days compiling), when this first happened.
>
> Then I decided to try fso-testing (argh, another two days compiling), and I
> was unpleaseantly surprised to see the same error.
>
> What could I be doing wrong? Any suggestions?
>
> Rui
hi,
you seem wanting to install the ipk without its dependencies.
personally I do bitbake package-index,then I push my deploy dir to my
server-router.
Then I do opkg update on the device and install the package with opkg
install $package-name
Denis.
More information about the community
mailing list