linphone 3.1.0

MicVM ssj2micvm at
Wed Jun 24 21:56:46 CEST 2009

Al Johnson wrote:
> On Wednesday 25 March 2009, Paul Fertser wrote:
>> > Problems:
>> > * I haven't got it to do sound yet - it seems unhappy with the alsa
>> > device capabilities. I don't know if this is a configuration issue or a
>> > fundamental problem.
>> I guess you face the same issue with borked /etc/asound.conf as
>> others. It has dmix as the default device, and dmix obviously doesn't
>> support recording. Probably you can remove /etc/asound.conf altogether
>> or try to mimic configuration of any desktop distro. Or just configure
>> linphone to use hw:0,0 by default.
>> Also, don't forget that a special voip.state should be loaded before
>> trying to input/output sound. It uses DAI mode 10 and arecord -D
>> hw:0,0 | aplay -D hw:0,0 is known to work.
> I suspected as much, but couldn't confirm at the time. I had only given it
> a 
> cursory check with the config that used to work for me with v1.6 and
> 2007.2. 
> Now I can confirm it works using Brian Code's asound.conf and the voip-
> handset.state that comes with milestone5. 
> Brian's config is available at:

Thanks for the precious hints guys. I am running shr unstable and linphone 3
there eats up to 80% of cpu time and so makes a conversation impossible. Did
u do the same experience there?

View this message in context:
Sent from the Openmoko Community mailing list archive at

More information about the community mailing list