[QtExtended] Latest and greatest, progress mail 11

Warren Baird wjbaird at alumni.uwaterloo.ca
Fri May 22 18:16:28 CEST 2009


Hmm.   I just tried doing the setup on my FR's internal memory (rather than
the SD card), using the suggested fso-image-nox-om-gta02.jffs2 image as a
starting point.

The install worked, but after I successfully installed QT and rebooted, the
usb networking refused to come up.   I had to do a 'ifconfig usb0 up' and
'ifconfig usb0 192.168.0.202' from the terminal before I could log into
it.   Any ideas what might cause that and what I could do to fix it?   I've
tried rebooting again, and it didn't seem to make any difference...

Warren



On Fri, May 22, 2009 at 5:44 AM, Franky Van Liedekerke
<liedekef at telenet.be>wrote:

> On Thu, 21 May 2009 16:52:18 -0400
> Warren Baird <wjbaird at alumni.uwaterloo.ca> wrote:
>
> > I've been running this build for about a week now, and am pretty
> > happy with it.   I installed it on my SD card on top of an OM2009 TR3
> > install.   I don't know if that's an officially supported
> > configuration, but it has seemed to mostly work.
> >
> > The only recurrent problem I've had is that it seems like my battery
> > meter recently started always showing full - I've had the thing run
> > out of battery a couple of times due to this.  Now I have to go to
> > the terminal and run apm if I want to know what my actual battery is.
> >
> > However, just in the last couple of hours I've seen a new failure
> > mode - when someone calls my FR I see the standard call indication -
> > but if I click answer, it doesn't actually answer the call - the
> > caller continues to hear ringing and eventually goes to voice mail.
> >
> > The entries I see in logread starting when I get the call look like
> > this: May 23 16:53:04 om-gta02 user.emerg kernel: [65512.070000]
> > mapped channel 10 to 2
> > May 23 16:53:04 om-gta02 user.notice Qtopia: QAudioOutput:
> > snd_pcm_sw_params: err -22
> > May 23 16:53:05 om-gta02 user.info kernel: [65513.845000]
> > fbcon_event_notify action=12, data=c7a75dac
> > May 23 16:53:05 om-gta02 user.info kernel: [65513.845000] jbt6k74
> > spi2.0: **** jbt6k74 unblank
> > May 23 16:53:05 om-gta02 user.info kernel: [65513.870000]
> > fbcon_event_notify action=9, data=c7a75de8
> > May 23 16:53:05 om-gta02 user.info kernel: [65513.870000] jbt6k74
> > spi2.0: **** jbt6k74 unblank
> > May 23 16:53:26 om-gta02 user.info kernel: [65534.050000]
> > fbcon_event_notify action=12, data=c7a75dac
> > May 23 16:53:26 om-gta02 user.info kernel: [65534.050000] jbt6k74
> > spi2.0: **** jbt6k74 unblank
> > May 23 16:53:26 om-gta02 user.info kernel: [65534.070000]
> > fbcon_event_notify action=9, data=c7a75de8
> > May 23 16:53:26 om-gta02 user.info kernel: [65534.070000] jbt6k74
> > spi2.0: **** jbt6k74 unblank
> >
> > It's kinda annoying to not be able to answer calls...   :-)
> >
> > I'm going to reboot and hope that fixes it.
> >
> > Is it possible this is because I started with the OM2009 TR image,
> > and not the one recommended in the install script?
> >
> > Warren
> >
>
> Hi,
>
> yes, this is very much possible, since the OM2009 TR image is a very
> old kernel that has many bugs.
>
> Franky
>
> _______________________________________________
> Openmoko community mailing list
> community at lists.openmoko.org
> http://lists.openmoko.org/mailman/listinfo/community
>



-- 
Warren Baird - Photographer and Digital Artist
http://www.synergisticimages.ca
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.openmoko.org/pipermail/community/attachments/20090522/a471189f/attachment.htm 


More information about the community mailing list