Om2009 testing release 4

Warren Baird wjbaird at
Mon May 25 18:08:33 CEST 2009

Rui - I'm not sure if omnewrotate was causing the general unstability - but
I do think it was probably what caused me to miss the call.   I had another
experience with epdfview where when I held the FR horizontally I had to
click about 1.5 cm to the right of the 'next page' button to get it to
actually go to the next page.  After holding it vertically and then
horizontally again, it was fine.

I think I might try TR4 again with a manual screen rotater and see if I have
better luck.


On Sun, May 24, 2009 at 5:19 PM, Rui Miguel Silva Seabra <rms at>wrote:

> On Sun, May 24, 2009 at 05:14:01PM -0400, Warren Baird wrote:
> > I'm afraid my experience with TR4 wasn't that great. I installed it
> Friday
> > night, and played with it enough to make sure that I could make and
> receive
> > calls.   I must admit that after using QtE it was nice to be able to
> install
> > software like a pdf reader and mokomaze.
> >
> > However, The first real call I got was from my wife heading over to the
> park
> > with our daughter.  I heard the ringing, and the phone seemed to wake up
> > from suspend quickly (which puts it ahead of my experience from OM2008),
> but
> > when I pressed the answer button nothing happened.   I had been running
> > omrotatenew, and I've noticed that it sometimes screws up the touch
> screen
> > calibration, so I don't know if this is actually a TR4 problem, or an
> issue
> > with the rotation.
> >
> > However, once I missed the call, I figured I'd use the call log to call
> her
> > back, so I went to the call log and clicked on the entry.   It took me to
> an
> > empty dialer window - without a number entered.     Since I know her
> number
> > I just typed it in, and clicked on the 'call' button.   Nothing happened.
> > I clicked on the 'back button' - also nothing.   I used the illume menu
> to
> > take me to the main paroli windows, but couldn't make anything work there
> > either.  I ended up rebooting.
> >
> > After the reboot, I still couldn't get dialing to work, so I rebooted
> again,
> > and then was able to call my wife --- total time elapsed to make the call
> > was probably 20 minutes.   When I did get ahold of her, she said that she
> > could barely understand me, since the audio was quite distorted - she
> > sounded fine to me, and probably a bit louder than I get with QtE.
> >
> > I might give TR4 another try without omreotatenew running and see if it's
> > any more reliable that way...
> Pretty sure omnewrotate ain't the problem, I've run into that before
> installing
> it.
> Right now I suspend manually in order to check it's working, but it seems
> to be triggered by missed calls.
> Rui
> _______________________________________________
> Openmoko community mailing list
> community at

Warren Baird - Photographer and Digital Artist
-------------- next part --------------
An HTML attachment was scrubbed...

More information about the community mailing list