Symptoms of failed #1024 fix

Jens Seidel jensseidel at users.sf.net
Sun Nov 1 17:36:36 CET 2009


Hi,

you performed a #1024 bug and can no longer access to modem? You get in
/var/log/frameworkd.log:

2009.11.01 17:25:06.733 ogsmd.modem.abstract ERROR    could not open channel MISC, retrying in 2 seconds
2009.11.01 17:25:06.743 ogsmd.modems.ti_calypso INFO     Requesting new channel from 'fso-abyss'
2009.11.01 17:26:08.523 ogsmd.modem.abstract ERROR    could not open channel UNSOL, retrying in 2 seconds
2009.11.01 17:26:08.533 ogsmd.modems.ti_calypso INFO     Requesting new channel from 'fso-abyss'
2009.11.01 17:26:21.733 ogsmd.modem.abstract ERROR    could not open channel CALL, retrying in 2 seconds
2009.11.01 17:26:21.743 ogsmd.modems.ti_calypso INFO     Requesting new channel from 'fso-abyss'

This happened to me too on every boot of SHR. I just want to confirm that
these symptoms mean that the soldering was not properly done so that no
capacitor is used instead of the 10uF or 22uF one. I will ask the engineer
who  performed this task for me to do it again to get a proper phone.

I also want to mention that I did not observed other problems. The device
boots fine, the touchscreen and USB works, ... GPS failed for me but maybe I
did not properly plugged the antenna.

Some programs such as Cellhunter stop now with:
An exit code of 1 was returned from /usr/bin/cellhunter.py

So even if the capacitor cannot properly solded again I have a fine
device :-)

Jens



More information about the community mailing list